Secondary entities not appearing

[JackJackattack4]

Hello Tuya-local people,

I have created my own yaml code to add a device that is currently unsupported and used to add the device to HA. It worked but not fully.

I can see all primary entities but not the secondary entities in HA. See below the extract showing the entities which I can see.

I was expecting to see primary and secondary entities in the attributes of the device. I was expecting to see "Inquire_ID", ID 104 to appear in the attributes. There must be something I missed somewhere. Does anyone know what this could be?

This is the yaml code I made on my own to add the device

name: EVI DC Inverter Heat Pump
products:
  - id: eb9a44bd30916d3150ftup
    name: A2 Pro
  - id: eb313fb004c523375cxgzw
    name: A2 Pro 2
primary_entity:
  entity: climate
  dps:
    - id: 1
      name: ON-OFF
      type: boolean
      mapping:
        - dps_val: false
          value: "Off"
        - dps_val: true
          value: "On"
    - id: 2
      name: Target Temp.
      type: integer
      range:
        min: 5
        max: 60
    - id: 3
      name: Current Temp.
      type: integer
    - id: 4
      name: Working Mode
      type: string
      mapping:
        - dps_val: hot
          value: Heating
        - dps_val: cold
          value: Cooling
        - dps_val: hotwater
          value: Hot Water
        - dps_val: hot_hotwater
          value: Heating + Hot Water
        - dps_val: cold_hotwater
          value: Cooling + Hot Water
    - id: 5
      name: Setting Temp. Type
      type: string
      mapping:
        - dps_val: HotWater
          value: Hot Water
        - dps_val: Hot
          value: Heating
        - dps_val: Cold
          value: Cooling
    - id: 103
      name: Working Status
      type: string
      mapping:
        - dps_val: on
          value: On
        - dps_val: off
          value: Off
        - dps_val: defrost
          value: Defrost
        - dps_val: antifrozen
          value: Antifrozen
secondary_entities:
  - entity: select
    name: Inquire_ID
    category: config
    dps:
      - id: 104
        # mappings based on dev portal info, observed values and manufacturer's manual. DPID 104 (para. Inquiry) specifies which parameter is inquired and the value is returned using DPID 105 (Inquiry Value).
        type: string
        name: Para. Inquiry
        mapping:
          - dps_val: 1
            value: version no.
          - dps_val: 2
            value: ambient temp.
          - dps_val: 3
            value: water tank temp.
          - dps_val: 4
            value: outlet water temp.
          - dps_val: 5
            value: inlet water temp.
          - dps_val: 6
            value: evaporator coil temp.
          - dps_val: 7
            value: exhaust gas temp.
          - dps_val: 8
            value: condenser coil temp. (after throttling)
          - dps_val: 9
            value: suction temp.
          - dps_val: 10
            value: module temp.
          - dps_val: 11
            value: main valve opening degrees
          - dps_val: 12
            value: auxiliary valve opening degrees
          - dps_val: 13
            value: exhaust gas valve opening degrees
          - dps_val: 14
            value: Fan speed
          - dps_val: 15
            value: running frequency
          - dps_val: 16
            value: AC voltage
          - dps_val: 17
            value: DC voltage
          - dps_val: 18
            value: current of whole unit
          - dps_val: 19
            value: compressor current
          - dps_val: 20
            value: output power
          - dps_val: 21
            value: EVI plate heat exchanger inlet sensor
          - dps_val: 22
            value: EVI plate heat exchanger outlet sensor
          - dps_val: 23
            value: low pressure
          - dps_val: 24
            value: high pressure
          - dps_val: 25
            value: error code
          - dps_val: 26
            value: limited frequency code
          - dps_val: 27
            value: LCD Controller version
          - dps_val: 28
            value: MCU1 version
          - dps_val: 29
            value: MCU2 version
          - dps_val: 30
            value: MCU3 version
          - dps_val: 31
            value: Error History
  - entity: select
    name: Inquire_Value
    category: config
    dps:
      - id: 105
        # DPID 104 (para. Inquiry) specifies which parameter is inquired and the value is returned using DPID 105 (Inquiry Value).
        type: integer
        name: Inquiry Value
  - entity: select
    name: Set_ID
    category: config
    dps:
      - id: 106
        # mappings based on dev portal info, observed values and manufacturer's manual. DPID 106 (Para. Setting) specifies which parameter is set using the value in DPID 107 (Set Value).
        type: string
        name: Para. Setting
        mapping:
          - dps_val: d01
            value: Heating Temp Setting
          - dps_val: d02
            value: Heating Water Tank Temp Setting
          - dps_val: d03
            value: Cooling Temp Setting
          - dps_val: d04
            value: Restart Temp Difference 
          - dps_val: d05
            value: Selection on Control basis
          - dps_val: d06
            value: Setting Temp Of Electric Heater
          - dps_val: d07
            value: Deviation Time of Electric Heater Start
          - dps_val: d08
            value: Evaporator coil Temp to enter into defrosting
          - dps_val: d09
            value: Evaporator coil Temp to exit defrosting 
          - dps_val: d10
            value: Defrosting Cycle Period
          - dps_val: d11
            value: Defrosting Time
          - dps_val: d12
            value: Selection on Control after temp is reached
          - dps_val: d13
            value: Ambient temp for Stopping and Starting machine
          - dps_val: d14
            value: Temp Difference of Inlet and Outlet water for heat pump's
          - dps_val: d15
            value: Working Way of Water Pump
  - entity: select
    name: Set_Value
    category: config
    dps:
      - id: 107
        # DPID 106 (Para. Setting) specifies which parameter is set using the value in DPID 107 (Set Value).
        type: integer
        name: Set Value

[make-all]

select entities require a dp with name option, and this dp must have a mapping listing available options.

[JackJackattack4]

I have updates the dp name with option and by-passed the dp for which I do not know what to put as mapping at the output possibilities are numerous. Added device again with new code and it works, the secondary entities are created.

Here is the code I have used which works to extract the "select" secondary entities.

name: EVI DC Inverter Heat Pump
products:

• id: eb9a44bd30916d3150ftup
  name: A2 Pro
• id: eb313fb004c523375cxgzw
  name: A2 Pro 2
  primary_entity:
  entity: climate
  dps:
  • id: 1
    name: ON-OFF
    type: boolean
    mapping:
    • dps_val: false
      value: "Off"
    • dps_val: true
      value: "On"
  • id: 2
    name: Target Temp.
    type: integer
    range:
    min: 5
    max: 60
  • id: 3
    name: Current Temp.
    type: integer
  • id: 4
    name: Working Mode
    type: string
    mapping:
    • dps_val: hot
      value: Heating
      icon: "mdi:fire"
    • dps_val: cold
      value: Cooling
      icon: "mdi:snowflake"
    • dps_val: hotwater
      value: Hot Water
    • dps_val: hot_hotwater
      value: Heating + Hot Water
    • dps_val: cold_hotwater
      value: Cooling + Hot Water
  • id: 5
    name: Setting Temp. Type
    type: string
    mapping:
    • dps_val: HotWater
      value: Hot Water
    • dps_val: Hot
      value: Heating
    • dps_val: Cold
      value: Cooling
  • id: 103
    name: Working Status
    type: string
    mapping:
    • dps_val: on
      value: On
    • dps_val: off
      value: Off
      icon: "mdi:hvac-off"
      icon_priority: 1
    • dps_val: defrost
      value: Defrost
      icon: "mdi:snowflake-melt"
      icon_priority: 3
    • dps_val: antifrozen
      value: Antifrozen
      secondary_entities:
• entity: select
  name: Inquire_ID
  category: config
  dps:
  • id: 104

    mappings based on dev portal info, observed values and manufacturer's manual. DPID 104 (para. Inquiry) specifies which parameter is inquired and the value is returned using DPID 105 (Inquiry Value).

    type: string
    name: option
    mapping:
    • dps_val: "1"
      value: version no.
    • dps_val: "2"
      value: ambient temp.
    • dps_val: "3"
      value: water tank temp.
    • dps_val: "4"
      value: outlet water temp.
    • dps_val: "5"
      value: inlet water temp.
    • dps_val: "6"
      value: evaporator coil temp.
    • dps_val: "7"
      value: exhaust gas temp.
    • dps_val: "8"
      value: condenser coil temp. (after throttling)
    • dps_val: "9"
      value: suction temp.
    • dps_val: "10"
      value: module temp.
    • dps_val: "11"
      value: main valve opening degrees
    • dps_val: "12"
      value: auxiliary valve opening degrees
    • dps_val: "13"
      value: exhaust gas valve opening degrees
    • dps_val: "14"
      value: Fan speed
    • dps_val: "15"
      value: running frequency
    • dps_val: "16"
      value: AC voltage
    • dps_val: "17"
      value: DC voltage
    • dps_val: "18"
      value: current of whole unit
    • dps_val: "19"
      value: compressor current
    • dps_val: "20"
      value: output power
    • dps_val: "21"
      value: EVI plate heat exchanger inlet sensor
    • dps_val: "22"
      value: EVI plate heat exchanger outlet sensor
    • dps_val: "23"
      value: low pressure
    • dps_val: "24"
      value: high pressure
    • dps_val: "25"
      value: error code
    • dps_val: "26"
      value: limited frequency code
    • dps_val: "27"
      value: LCD Controller version
    • dps_val: "28"
      value: MCU1 version
    • dps_val: "29"
      value: MCU2 version
    • dps_val: "30"
      value: MCU3 version
    • dps_val: "31"
      value: Error History
      #- entity: select
      #name: Inquire_Value
      #category: config
      #dps:
      #- id: 105

    DPID 104 (para. Inquiry) specifies which parameter is inquired and the value is returned using DPID 105 (Inquiry Value).

    #type: integer
    #name: option
• entity: select
  name: Set_ID
  category: config
  dps:
  • id: 106

    mappings based on dev portal info, observed values and manufacturer's manual. DPID 106 (Para. Setting) specifies which parameter is set using the value in DPID 107 (Set Value).

    type: string
    name: option
    mapping:
    • dps_val: "d01"
      value: Heating Temp Setting
    • dps_val: "d02"
      value: Heating Water Tank Temp Setting
    • dps_val: "d03"
      value: Cooling Temp Setting
    • dps_val: "d04"
      value: Restart Temp Difference
    • dps_val: "d05"
      value: Selection on Control basis
    • dps_val: "d06"
      value: Setting Temp Of Electric Heater
    • dps_val: "d07"
      value: Deviation Time of Electric Heater Start
    • dps_val: "d08"
      value: Evaporator coil Temp to enter into defrosting
    • dps_val: "d09"
      value: Evaporator coil Temp to exit defrosting
    • dps_val: "d10"
      value: Defrosting Cycle Period
    • dps_val: "d11"
      value: Defrosting Time
    • dps_val: "d12"
      value: Selection on Control after temp is reached
    • dps_val: "d13"
      value: Ambient temp for Stopping and Starting machine
    • dps_val: "d14"
      value: Temp Difference of Inlet and Outlet water for heat pump's
    • dps_val: "d15"
      value: Working Way of Water Pump
      #- entity: select
      #name: Set_Value
      #category: config
      #dps:
      #- id: 107

    DPID 106 (Para. Setting) specifies which parameter is set using the value in DPID 107 (Set Value).

    #type: integer
    #name: option