Can the Tuya wifi energy consumption meter still be used?

[ljeffyl]

I bought four V-WIFI-DL02-ES. I found that Tuya has local support, but cannot add HA (I added it using Tuya APP, not Smart Life. I don’t know if it has anything to do with this. I will try it later)

During configuration, "Unable to connect to your device details. This may be an intermittent issue or it may be an error."
I also tried the auto version

The following messages will appear in the log in order:
<class 'OSError'>: [Errno 98] The address used when initializing device eb153b53cf9d273cf3src1

Connection test failed, <class 'OSError'> [Errno 98] The address is in use

An error occurred while executing the job: Exception in callback _SelectorDatagramTransport._read_ready()
Traceback (most recent call last):
File "/config/custom_components/localtuya/discovery.py", line 65, datagram_received
data = decrypt_udp(data)
^^^^^^^^^^^^^^^^^
File "/config/custom_components/localtuya/discovery.py", line 30, decrypt_udp
return_unpad(decryptor.update(message)+decryptor.finalize()).decode()
^^^^^^^^^^^^^^^^^^^
File "/usr/local/lib/python3.11/site-packages/cryptography/hazmat/primitives/ciphers/base.py", line 186, finalized
data = self._ctx.finalize()
^^^^^^^^^^^^^^^^^^^
File "/usr/local/lib/python3.11/site-packages/cryptography/hazmat/backends/openssl/ciphers.py", line 222, finalized
raises valueError(
ValueError: The data length provided is not a multiple of the block length.

In the process of handling the above exception, another exception occurred:

Traceback (most recent call last):
File "/usr/local/lib/python3.11/asyncio/events.py", line 80, in _run
self._context.run(self._callback, *self._args)
File "/usr/local/lib/python3.11/asyncio/selector_events.py", line 1163, in _read_ready
self._protocol.datagram_received(data, address)
File "/config/custom_components/localtuya/discovery.py", line 67, datagram_received
data = data.decode()
^^^^^^^^^^^^^^^^^
UnicodeDecodeError: 'utf-8' codec cannot decode byte 0xb9 in position 0: invalid starting byte

[make-all]

Are you trying to use Auto IP address detection, with localtuya also installed?

[ljeffyl]

I have tried all versions, but that was when localtuya existed but no device was configured. After just deleting localtuya, I can see all the sensors with version 3.5, so will there be a conflict between the two?

[ljeffyl]

Thank you very much for your development and answers

[ljeffyl]

I would like to ask how often these sensors are asked? Can they be adjusted by themselves?

[make-all]

There is a conflict between localtuya and this integration in the following situations:

• using Auto IP address detection
• having the same device configured in both

If you manually configure your devices with fixed IP, and the devices you configure in tuya-local are not configured in localtuya, then they should be able to work side by side.

When connected normally with a persistent connection, the sensor controls how often it updates. If you tick "polled updates", then Home Assistant controls how often the polling happens.

[ljeffyl]

I have a problem now. Unable to connect to other identical devices. It will say "Sorry, this device is not supported."