Support for vacuum cleaners to clean a specified room

[almirus]

Good day! Is it possible for vacuum cleaners to designate cleaning of an individual room, or can this only be accomplished through the cloud?

[make-all]

This is probably a cloud feature, unless you can find the correct number of direction commands and delays to send it there.

[almirus]

In the log, I see the following messages, which means there is support (room cleaning). 😊

2024-05-17 21:46:36.517 DEBUG (MainThread) [custom_components.tuya_local.helpers.device_config] command values: ['Auto clean', 'Zone cleaning', 'pose', 'clean_spot', 'return_to_base', 'Select room cleaning']
2024-05-17 21:46:36.517 DEBUG (MainThread) [custom_components.tuya_local.helpers.device_config] fan_speed values: ['Off', 'Gentle', 'Normal', 'Strong', 'Max']
2024-05-17 21:46:36.517 DEBUG (MainThread) [custom_components.tuya_local.helpers.device_config] Robot vacuum: Mapped dps 5 value from charge_done to charged
2024-05-17 21:46:36.517 DEBUG (MainThread) [custom_components.tuya_local.helpers.device_config] Robot vacuum: Mapped dps 5 value from charge_done to charged
2024-05-17 21:46:36.517 DEBUG (MainThread) [custom_components.tuya_local.helpers.device_config] command values: ['Auto clean', 'Zone cleaning', 'pose', 'clean_spot', 'return_to_base', 'Select room cleaning']
2024-05-17 21:46:36.517 DEBUG (MainThread) [custom_components.tuya_local.helpers.device_config] Robot vacuum: Mapped dps 9 value from normal to Normal
2024-05-17 21:46:36.517 DEBUG (MainThread) [custom_components.tuya_local.helpers.device_config] Robot vacuum: Mapped dps 9 value from normal to Normal
2024-05-17 21:46:36.517 DEBUG (MainThread) [custom_components.tuya_local.helpers.device_config] Robot vacuum: Mapped dps 4 value from chargego to return_to_base
2024-05-17 21:46:36.517 DEBUG (MainThread) [custom_components.tuya_local.helpers.device_config] Robot vacuum: Mapped dps 4 value from chargego to return_to_base
2024-05-17 21:46:36.517 DEBUG (MainThread) [custom_components.tuya_local.helpers.device_config] Robot vacuum: Mapped dps 5 value from charge_done to charged
2024-05-17 21:46:36.517 DEBUG (MainThread) [custom_components.tuya_local.helpers.device_config] Robot vacuum: Mapped dps 5 value from charge_done to charged
2024-05-17 21:46:36.518 DEBUG (MainThread) [custom_components.tuya_local.helpers.device_config] command values: ['Auto clean', 'Zone cleaning', 'pose', 'clean_spot', 'return_to_base', 'Select room cleaning']

[almirus]

{
                    "abilityId": 4,
                    "accessMode": "rw",
                    "code": "mode",
                    "description": "smart - 自动清扫模式/全屋清扫模式 \\nchargego - 自动回充模式\\nzone - 划区清扫模式/矩形清扫模式\\npose - 指哪扫哪模式/定点清扫模式\\npart - 局部清扫模式\\nselectroom - 选区清扫",
                    "extensions": {
                        "attribute": "704"
                    },
                    "name": "工作模式",
                    "typeSpec": {
                        "type": "enum",
                        "range": [
                            "smart",
                            "chargego",
                            "zone",
                            "pose",
                            "part",
                            "selectroom"
                        ]
                    }
                },

{
                    "abilityId": 5,
                    "accessMode": "ro",
                    "code": "status",
                    "description": "默认值（不可修改删除，否则影响控制面板逻辑）：\\nstandby - 待机中\\nsmart - 自动清扫中 \\nzone_clean - 划区清扫中\\npart_clean - 局部清扫中\\ncleaning - 清扫中(备选) \\npaused - 已暂停\\ngoto_pos - 前往目标点中\\npos_arrived - 目标点已到达 \\npos_unarrive - 目标点不可达 \\ngoto_charge - 寻找充电座中 \\ncharging - 充电中\\ncharge_done - 充电完成 \\nsleep - 休眠\\nselect_room - 选区清扫\\nmop_clean - 湿拖模式\\nmanual_control - 手动控制中\\n\\n可在后面增加其他状态值，状态值尽量是状态的英文小写单词，如需要增加故障中状态，则为in_trouble",
                    "extensions": {
                        "attribute": "706"
                    },
                    "name": "当前状态",
                    "typeSpec": {
                        "type": "enum",
                        "range": [
                            "standby",
                            "smart",
                            "zone_clean",
                            "part_clean",
                            "cleaning",
                            "paused",
                            "goto_pos",
                            "pos_arrived",
                            "pos_unarrive",
                            "goto_charge",
                            "charging",
                            "charge_done",
                            "sleep",
                            "select_room",
                            "mop_clean",
                            "manual_control"
                        ]
                    }
                },

[make-all]

Sure, there is a command, but how do you use it to tell a "specified room" to go to?

[almirus]

"extensions": {
                        "attribute": "706"
                    },

?

[make-all]

This is the bit that is cloud-only, I think. There is no "extensions" in the local protocol.