adding a Ledvance/OSRAM light in Tuya-local

[orPoG123]

Another tip that would have saved me quite a bit of work:

If you use the Smart+ app from Ledvance/OSRAM, you’ll get all the information needed to manually configure the device in SMART+ App without any detours through a developer account, Python scripts, etc.

• Device ID: beginning with bf.....
• local Key
• protocol version: try auto

The only thing that’s incorrect is the IP address. It must, of course, be a local network IP starting with 192… and not the one shown in the SMART+ App.

So, the tip: simply check the connected devices in your router and identify the correct IP by switching the lamp on and off. Worked well for me. By the way, my Ledvance panel had the default name “wlan0.”

[trozman]

I bought cheap Ledvance wifi lightbulbs.
Model name: LEDVANCE CLA60 6W WW DIM E27 SMART WIFI
I have ID, key, IP.
I successfully added them to Tuya Local in HA (as dimmable_light and some other), but it doesn't respond to any command.

Tinytuya status returns the following DPS:
{'dps': {'20': True, '21': 'white', '22': 1000, '25': '000e0d0000000000000000c803e8', '26': 0, '41': False}}

Sending command (on, off, ...) to lightbulb doesn't work - lightbulb doesn't react and it returns 'None'.
I tried sending single command or full payload (all dts).

Any ideas how to make it work?

[make-all]

This is not the tinytuya help forum. Tinytuya has its own high level implemention for lightbulbs which this integration does not use.

[trozman]

Ok, thanks.
I only used tinytuya to check the status and get dps (after the device didn't respond to commands in HA/Tuya Local).
I thought DPS would be helpful.
I checked the logs and I cant find anything useful under 'warnings'.