2023.12.0 Ready for HA 2023.12

Breaking changes

HA 2023.12 changes the YAML parser in a way that breaks previous
releases of this integration. Please upgrade to this version before
upgrading Home Assistant if possible. If you already upgraded HA to
2023.12, then updating to this release will likely fix any issues you
are seeing as a result of that upgrade.

New Wifi devices

• Petlibro PLAF103 pet feeder #1179
• Eurom Hot-Shot 2000 #1286
• Cecotec fan with light #1305
• NX-100AP Rapid purifier #1312
• Nedis PTC Ceramic fan heater #1338
• Blitzwolf BW-LT31 LED strip #1314
• Akai heat-pump clothes dryer #1266
• Olimpia Splendid Caldo Up T fan heater #1296
• Ferroli Titano water heater #1318
• Valehaus SYZN119 towel warmer #1328
• Soleusair A02/A10 air purifiers #1327
• Della air conditioner #1331
• Lublueblu SL60D vacuum #1334
• ZX-DB11B doorbell alarm #1322
• Fisher Summer air conditioner #1344
• SmarDeer Lock33 door lock #1181
• Thermex Lima 80V water heater #842
• Beok TGM50 thermostat #1369
• Breville Smart Dry Connect dehumidifier #1347
• Qlima D820A dehumidifier #1189
• ZM-WIFI smart meter #1208
• Tesla Smart dehumidifier #1210
• Modern Flames Orion fireplace #1247

Improvements to devices

• Momcozy white noise machine: fixed matching of v2 devices #1299
• Eurom Alutherm: improved compatibility #1315
• AlecoAir D12/D16: seperate water tank from other faults #1232, #1233
• ITS 45HD, Sendo, Vivax heatpumps: move aux heat to a separate switch #1331
• MRC Magnum: improved compatibility #1279
• Vivax heatpump: add optional dps from compatible Tadiran Apollo #1183
• ZYM201: fix range of detection distance #1355
• Blitzwolf BWSH5 humidifier: improved compatibility, added spray level control and fault codes #1220
• Kogan LX10 vacuum: add more error codes #1363
• Klarstein Dryfy Pro: move branding under products #1358
• Arlec PB88UHA, Kogan tower heater, Kogan KAWFHTP heater: add product info #1243

General improvements

• Bump tinytuya to 1.13.1 (should fix some protocol 3.5 issues)
• Remove dependency on pycryptodome, as tinytuya now works with the same cryptography library as Home Assistant itself.
• Deprecated aux heat, in line with HA 2023.9 UI changes #1331
• Added translation for displayoff preset for fans #1327
• Added more Hungarian translations #1188

Development improvements

• Improve test output when failing due to dps value mismatches
• Clarify requirements for reporting new devices in issue template - due to increasing volume of requests, low quality submissions cannot be accepted

2023.11.0 Light groups

New Wifi devices

• Novostella RGB string light #1180
• ZY-M201 mmWave presence sensor #1193
• ZC34T-03-3A swing arm opener #1163
• Pro Breeze 30L dehumidifier #1201
• Kennedy electric fireplace #1165
• RGBW lightbulb (with modern dp layout) #1169
• Ecostrad iQ heating element #1186
• Vacplus dehumidifier #1229
• Qoto 05 water valve #1236
• Greenmigo Alpha Q25 Pro dehumidifier #1207
• Moes curtain switch #1253
• Calex heater #1255
• Nedis LED strip #1261
• Rojeco PTM-001 pet feeder (new variant) #1264
• HYD WeAir Plus fan #1281
• Quad powerstrip with USB and power monitoring (EKF connect) #1260
• V-WIFI-DL02-ES energy clamp meter #1268
• Momcozy white noise machine (2 variants) #1274, #1275

Improvements to existing devices

• Light string: use string to avoid hex decoding issues and make compatible with Popotan model #1171
• Medion vacuum: fixed command dp so commands can be sent #1185
• Advanced Fires 1500: improve compatibility #1177
• Atorch S1WP: improve compatibility by making light and main switch optional #1103
• Smartplugv2 Energyv3: force power to 0 when off #1192
• Gautone alarm: improve compatibility by making mode notification switch optional #1194
• Feyree EV charger: improve compatibility by making clear energy button optional #1176
• Lefant M213 vacuum: improved error code matching
• Avatto WT100: improve compatibility for WT200W #1166
• Sunbeam electric blanket: Improve compatibility #1218
• Heatstorm heater: fix presets and temperature unit handling #1241, #1242

General improvements

• climate: revert to returning "auto" when there is no hvac_mode dp, and list it in hvac_modes. #1144
• siren: handle integer volume dp correctly #1219
• light: silently accept out of range color temperatures without errors #1259

Development changes

• utils: added more ways to investigate dp matches, and improved the output of existing ones
• VSCode: ensure all text files are properly terminated

2023.10.0 - reenable deprecated entities

Breaking changes

• Climate entities that do not have any hvac_mode dp now return a mode of None instead of "auto". This affects Inkbird ITC-308 devices, and maybe others, and should prevent an empty mode selection control from being displayed on the new climate UI in HA 2023.10. #1144

• Lock entities now clear unlock dps immediately after reporting them. This may result in the unlock source disappearing from the UI too quickly, but helps with detection of multiple unlocks happening in quick succession. #796

New WiFi devices

• Suntec Wellness Coolfixx portable air conditioner #1071
• Taberno LED lights #1095
• Holman WX2 tap timer #1108
• Aurora Smart Galaxy Star #1128
• Mamnv BR151 vacuum #1148, #1101
• Atorch S1WP smartplug energy meter #1139
• Trotec PAC-W 2600 SH #1099
• Medion S20 vacuum with mop #1117
• MC6 thermostat #1121
• Advanced Fires 1500 electric fireplace #1124
• Eurom Alutherm heater #1138
• Feyree home EV charger #1149
• Sunbeam dual heated mattress pad #1153
• BSTUOKEY access control keypad #1152
• Parkside PMW300 solar inverter #1147
• Treatlife dual dimmer smartplug #1161
• YX316WIFI aroma diffuser #1134
• Reiga 52 ceiling fan with light #1167

New Zigbee devices

• Moes RGBCW lightbulb #1154
• Aubess temperature humidity sensor #1154

Improvements to existing devices

• Intelbras lock: improve compatibility by making battery optional #1105
• Beok TGR81: fix dp redirection #1120
• WF520D: add yaml extension to make config detectable #1123
• Holman WX1: expand config based on WX2 info #1108
• Emylo meter: use correct button class #1137
• Fairland heatpump: use correct temperature range #222
• Inkbird ITC-306A: use hvac_mode instead of preset_mode #1144
• Jiahong thermostat: simplify hvac_action mappings
• WDYK 3phase meter: force poll current/voltage/power sensors #550
• ZY-M100: make status optional for compatibility with WZ-M100 #1132
• ZG205W: add more dps #1151
• Asakuki diffuser: document that Ditua config may suit later models better #1140

General improvements

• add tests to catch incorrectly redirected dps in config files #1120
• document alternatives to using Tuya hubs for zigbee and Bluetooth devices
• make it easier to identify device in log messages #1013
• disable deprecated entities using the entity registry so they can be reenabled by users #1143
• climate: return None rather than "auto" when there is no hvac_mode dp #1144
• lock: clear non-persistent unlock detection dps immediately after reporting #796

2023.9.1 Warmer lightbulbs

Breaking changes

• lights now use Kelvin rather than mired for colour temperature. This will affect configuration files that are maintained outside of the repository. #1086
  The following lights may now have the color temperature inverted, as it was not clear whether the previous lack of inversion was a bug or intentional:
  • Atomi Ceiling fan
  • RGBCW Lightbulb2
  • Tampa LED system
  • Windcalm fan with light
• the color temperature range of lights can now be configured. Lights where the original report or other information indicated the range were updated to the actual range. Others were updated to the common range of 2700K - 6500K. Previously, the Home Assistant default of 153-500 mireds (2000-6500K) was used, so automations that used the full range may need updating to the new range. Mostly this will be unnoticeable in the UI.

---

New WiFi devices

• Breville AirDynamic 3D fan #983
• Dim2Warm Gold 1800-2700K CCT lightbulb #1080
• A60 RGBWW 1800-2700K lightbulbs #996
• AlecoAir D25 Traditio #1085
• 3 outlet energy monitoring powerstrip #1088
• Ultenic T10 vacuum #1093
• ARD-100+ valve #1107
• Dcenta dual clamp meter #1109
• SWS-001 weather station #1096
• Rotenso Roni X #1114

New Zigbee devices

• Intelbras IFR7000 lock #1105

Improvements to existing devices

• Somgom single switch: allow different option groups for Initial state to match more brands of switch #962
• Geyserwise water heater: compatibility improvements for TSE1 #765
• ElectriQ Airflex: provide alternate mode and power selection for single dp control #609
• Smartplugv1: add compatible SP111-A device #1070
• Smartplugv2 Energy: add compatible Eightree device, add optional child lock, backlight control, remove polling #1061
• CCT lightbulb: add compatbiel Genio device #1089
• WDYK 2p63: add more dps and mark some optional #1078
• Energy meters (multiple models): use total_increasing state class for energy sensors to enable use in Energy dashboard. #1081
• PC321TY: add compatible product #1098

General improvements

• Lights use Kelvin rather than mireds natively for color temperature #1086
• Added support for 'target_range' to allow shifting values from one range into another #1080
• Added Polish translations #1087
• Avoid double removal of shutdown listener when handling shutdown #1097
• Fix link to local key documentation #1100
• Treat empty string cid the same as missing cid #1110 (may fix #1065,
• #1013, #968)

2023.9.0 New and improved devices

Breaking changes

No breaking changes in this release

New WiFi devices

• Woods Cortina air conditioner #1029
• DJive ARC humidifying fan #1029
• Xiumii human presence sensor #1028
• Blumfeldt Cosmic Beam radiant heater #1030
• Abir X8 vacuum #1033
• Quad powerstrip with timer #1031
• ZG205W mmWave presence sensor #1043
• Momland/Loycco sound machine nightlight #1042
• Kojima motion sensor RGBCW light #1041
• Royal Sovereign air conditioner #1016
• Carro ceiling fan and light #930 #1047
• Casafan ceiling fan and light #999
• Kogan sleep aid #1003
• AGL Ultracontacto R2 #1005
• Liectroux XR500[T3] vacuum #1056
• MRC Magnum floor heating #1064
• WF520D dual dimmer touch switches #1073
• CT20W motion detection alarm panel #1077
• MatSee Plus bidirectional dual clamp power meter #1072
• Geyserwise TSE1 water heater controller #765

New Zigbee devices

• Loginovo DV7S human presence sensor #1057
• Loratap 6 button remote #1067

Improvements to existing devices

• RGBCW lightbulb: add Genio lightbulbs to product list #1024
• Essentials purifier: standardise UV sterilization name
• Mirabella Genio: add Maxcio to product list, expose timer #1036
• Simple switch with timer: add Teckin SP27 to product list #1037
• TH16 climate sensor: improve compatibility: #1035
• PIR spotlight: add Nedis outdoor floodlight to product list #1040
• Ledkia fan/light: add new product to product list #1039
• Carson CB: improve compatibility for Shinco Yoau YWD1 #1032
• TYTE D1: mark energy as optional for compatibility #1044
• PC311TY meter: fix units for reactive power #1045
• Gautone alarm: add sensors and attributes #1051 #1059
• AGL Ultra Magic: convert from non-working lock to working cover #1004
• Eeese Otto: improve detection #306
• BLE water valve: add Royal Gardineer product id #1062
• Emylo meter: fix masks for sensor readings #1066
• Ditua aroma diffuser: improve compatibility for Sierra Modern Home #1063

General improvements

• Documentation fixes #1018, #1034
• Bump tinytuya to 1.12.11 (fixes some error messages)
• unixtime dp type: move implementation to be more effective
• update automated tests to be compatible with HA 2023.9

2023.8.2 timestamps

New WiFi devices

• ASIP-0622 planter #687
• 1/2/3/4 gang Brilliant wall switches #900
• Moes star projector #821
• Duux Whisper Flex fan #989
• Yidi fan and light switch #993
• Pinelake birdfeeder camera #698 / #828
• Ovlaim ceiling fan with light #749
• EMS heatpump water heater #751

New Zigbee devices

• Nedis ZBSC10WT temperature/humidity sensor #831
• Nedia door/window sensor #702
• MultiIR temperature/humidity sensor #710
• Temperature/humidity alarm sensor #709

Improvements to existing devices

• Monzana air conditioner: add heat function #985
• Mantra fan: light color_temp is inverted #995
• Kabum 700 vacuum: improved compatibility #991
• Avatto curtain light: improved compatibility #987
• Relay switch with remote: diffs between local and cloud protocols #947
• Divoo water timer: correct timer units #1007

General improvements

• add unixtime type for timestamp sensors. #687
• remove "uuid" from device_id description, as they are not always the same #1008 and others
• Explictly set entity names to None instead of accepting default #992
• tinytuya upgraded to 1.12.10
• clear pending updates once the device has reflected them #1001
• improved connection logging #968
• avoid type error scaling masked values #947
• round dp values to int when range checking to avoid under/over by tiny fraction #1014

2023.8.1 hotfix

General improvements

• fix problem with entity migration in 2023.8.0 #984

Due to the short time between 2023.8.0 and 2023.8.1, and the likelihood the previous release has been skipped, the breaking changes section for 2023.8.0 is repeated below. For more details on the other changes, see the release notes for 2023.8.0.

Breaking changes in 2023.8.0

Default naming

Many sensors are now defaulting to the HA standard name for their class, to make use of standard name translations. This has resulted in some entities being renamed. A migration attempts to handle the renaming in Home Assistant's registry but it may still be necessary to update automations or some other references to entities. There may also be some cases that were missed by the migration, in which case you will have new entities created, and the old ones will become "unavailable" and will need to be deleted manually.

If you are using a version of Home Assistant older than 2023.7, some entities will be displaying only the device name the UI. #871

These are the main changes:
- carbon_dioxide: some were previously named CO2
- carbon_monoxide: some were previously named CO
- humidity: some were previously named Current humidity, but no change was made for deprecated sensors (see below)
- pm1: some were previously named PM 1.0 (translates to pm_1_0 in entity naming)
- pm10: some were previously named PM 10 (translates to pm_10 in entity naming)
- pm25: were previously named PM 2.5 (translates to pm_2_5 in entity naming)
- temperature: some were previously named Current temperature
- volatile_organic_compounds some were previously named TVOC

Humidity sensor deprecation for humidifiers and dehumidifiers

Current humidity sensors for humidifiers and dehumidifiers have been deprecated, as the humidifier entity supports reporting of current humidity as of HA 2023.7 #869

Battery level moved to separate sensor for vacuums

As of HA 2023.8, the battery_level attribute of vacuums is deprecated, to be replaced by battery sensors. To avoid the deprecation warning, this change has been made already. After this change, battery status has full history recording available, however if you have any automations reading the battery_level from the vacuum, you will need to update these to read from the battery sensor instead.

Some custom cards may not yet be updated for this change, so the battery level may disappear from the card until it is updated. #954

Poolex Q7 (and Q9 and others) use as water_heater is deprecated

After gathering more info on the preset modes available for this device, the main entity has been changed from water_heater to climate to make the cooling funtions available too. The water_heater entity is deprecated. #966

hidden mappings behaviour change

Previously a mapping could be marked hidden to hide it from the list of possible values. Now these mappings have also been made one-way, to only map device values to the UI. The main use case for these is to map unexpected values like null (missing any value) to something else for the UI. Mapping back to these unexpected values when a value is changed from the UI is not desirable behaviour for the use cases imagined for this feature, and if you need that the mapping should probably not be hidden. #914

2023.8.0

Breaking Changes

Default naming

Many sensors are now defaulting to the HA standard name for their class, to make use of standard name translations. This has resulted in some entities being renamed. A migration attempts to handle the renaming in Home Assistant's registry but it may still be necessary to update automations or some other references to entities. There may also be some cases that were missed by the migration, in which case you will have new entities created, and the old ones will become "unavailable" and will need to be deleted manually.

If you are using a version of Home Assistant older than 2023.7, some entities will be displaying only the device name the UI. #871

These are the main changes:
- carbon_dioxide: some were previously named CO2
- carbon_monoxide: some were previously named CO
- humidity: some were previously named Current humidity, but no change was made for deprecated sensors (see below)
- pm1: some were previously named PM 1.0 (translates to pm_1_0 in entity naming)
- pm10: some were previously named PM 10 (translates to pm_10 in entity naming)
- pm25: were previously named PM 2.5 (translates to pm_2_5 in entity naming)
- temperature: some were previously named Current temperature
- volatile_organic_compounds some were previously named TVOC

Humidity sensor deprecation for humidifiers and dehumidifiers

Current humidity sensors for humidifiers and dehumidifiers have been deprecated, as the humidifier entity supports reporting of current humidity as of HA 2023.7 #869

Battery level moved to separate sensor for vacuums

As of HA 2023.8, the battery_level attribute of vacuums is deprecated, to be replaced by battery sensors. To avoid the deprecation warning, this change has been made already. After this change, battery status has full history recording available, however if you have any automations reading the battery_level from the vacuum, you will need to update these to read from the battery sensor instead.

Some custom cards may not yet be updated for this change, so the battery level may disappear from the card until it is updated. #954

Poolex Q7 (and Q9 and others) use as water_heater is deprecated

After gathering more info on the preset modes available for this device, the main entity has been changed from water_heater to climate to make the cooling funtions available too. The water_heater entity is deprecated. #966

hidden mappings behaviour change

Previously a mapping could be marked hidden to hide it from the list of possible values. Now these mappings have also been made one-way, to only map device values to the UI. The main use case for these is to map unexpected values like null (missing any value) to something else for the UI. Mapping back to these unexpected values when a value is changed from the UI is not desirable behaviour for the use cases imagined for this feature, and if you need that the mapping should probably not be hidden. #914

New WiFi devices

• TH08 temperature and humidity sensor #932
• Goldair 101cm tower fan #925
• PV28-CW 8-in-1 air quality monitor #931
• BlitzWolf SHP-9 power strip #942
• ACME SH3305 powerstrip #941
• Mirabella Genio motion sensor #943
• Loginovo HDMI sync backlight #952
• Makegood dual smart switch #958
• Nedis outdoor camera #914
• MoesGo dimmer switch #927
• Holman WX1 tap timer #979
• Marpou ceiling light #967
• Kabum Smart 700 vacuum #944
• Cadence aroma diffuser #976
• Lyfco OL-A012 portable air conditioner #946
• Relay switch with 433MHz remote #947
• RL video intercom #462
• Inkbird iBBQ-4T v2 variant #750
• Ceres Plus pet feeder #507

New Bluetooth devices

• Solar garden light #605
• HU06 smart lock #973

Improvements to existing devices

• ITS 45HS heatpump: moved non-working sensors to attributes and renamed others #866, #928
• Proscenic M9 vacuum: restore use of "Customize mode" switch so mopping can be used #939
• Kogan bidet: device detection improvement #559
• YYM aroma diffuser: compatible Tellur device added #936
• Beca BAC002: device detection improvement #950
• Kogan air purifier: config properly installed #859
• CBI Astute switch: last state mapping corrected for local protocol #953
• Yinmik water quality monitor: device detection improvement #880
• PG10x alarm; device detection improvement #961
• Vivax heatpump: scale current temperature correctly, add the "quiet" switch #964
• Catit Pixi feeder: add optional fault sensors, found on compatible Nutri Meal device #960
• Poolex Q7: primary entity changed from water_heater to climate, presets added, temperature range restricted to swimming pool suitable temperatures, compatibility with Poolsana devices noted #966
• Rotenso heatpump: add name to fault sensor
• Simple switches: remove outlet device class - these can also match wall switches
• Eberg Cooly C35HD: device detection improvement #974
• Moebot S mower: support for CHARGING_PAUSE status and reduced timer range to 24h #980
• Starlight/Daizuke heatpumps: identified more dps based on compatible Pioneer WYT Diamante #820
• Kogan LX10 Vacuum: more reliably support start/pause commands #981

General improvements

• humidifier entities now support current_humidity (requires HA 2023.7 or later) #869
• fans now turn off when speed is set to 0 and on when speed is set away from 0, behaviour that was lost with the recent HA UI changes #936
• lights: RGB lights that report color as RGB rather than HSV are now properly supported #948
• tests have been updated to work with HA 2023.5 and later, where some dependency update forced a change in pytest asyncio config.
• locks: support for voice unlocking added, intercom opening properly implemented #973
• vacuums: prioritise start/pause commands over activate dp #981
• diagnostics: avoid exception when protocol is not yet negotiated #907

2023.7.0: Big endian

New Wifi devices

• Tontine electric blanket #829
• Duux Blizzard air conditioner #835
• Aquatech X6 water heater #836
• Windcalm fan #839
• Monzana Klimaanage air conditioner #840
• Goldair tower fan #844
• Home Awesone powerstrip #860
• Kogan air purifier #859
• Woods Milan air conditioner #843
• Aubess Rainpoint irrigation system #883
• GauTone PG-103 alarm #897
• Makegood double power point #904
• Garza irrigation system #918
• Yinmik water quality tester #880
• Royal Clima ventilation system #825
• ITS 4.5HD pool heatpump #866
• Sulion ceiling fan #881
• Inkbird IBS-M1S thermo-probe hub #910
• Proscenic M9 vacuum #921
• Loratap double curtain switch #920
• Sencor air conditioner #892

New Bluetooth device

• generic BLE water valve (replaces Johgee, and supports Divoo WT-03 and others also) #851
• Divoo dual water timer #882

Improvements to existing devices

• CCT, RGBCW lightbulbs, Tampa LED system, PIR spotlight, Mantra fan:
  scale brightness correctly #830
• DTS, SmartMCB, TOMPD meters: add energy_storage class to prepayment values.
• Inkbird iBBQ-4T:power is a sensor not switch, handle missing fault code. #750
• Neocool siren: adjust tones, min/max temperature scale, battery level, add alarm status #673
• Kogan LX10 vacuum: add error codes #849
• ZYM100 presence sensor: add lux sensor, detection delay #846, #919
• Rojeco feeder: improved compatibility, add battery sensor #845
• ZX-DB11 doorbell: add ringing binary sensor #763
• Lytmi backlight: improved compatibility #790, #889
• Starlight heatpump: identified more datapoints #878
• CO2 Box: add matching products #872
• Ultenic air fryer: improved mappings and naming #899
• SmartplugV2 EnergyV2: add optional connectivity binary sensor #909
• SmartplugV2 EnergyV3: add compatible product #893
• Owon PCT513 thermostat: identify more data points #875
• Rumba heater: properly expose preset_mode #922
• Linkoze button: add battery, try a different long press string #774
• Lucking HS6 lock: improve unlock detection #796
• Orion lock: improve unlock detection #798

General improvements

• Update docs for Tuya API Explorer changes
• Siren: fix volume_level #673
• Bump tinytuya to 1.12.9
• Add Czech translations #873
• Add Norwegian translations #843
• fix writing masked datapoints #877
• vscode devcontainer support #885
• clarifications and other documentation improvements #898, #903
• support for endianness in encoded dps #910

2023.6.1 Alarm control panels

Breaking changes

This build contains further translation improvements, and some changes to humidifier modes and fan preset_modes to support this.
The main changes are:

• restored the use of laundry as a dehumidifier mode, as many devices support it (previous release renamed most of these to "strong" which has been reverted)
• use the standard modes, plus laundry and purify where appropriate.
• use common set of fan preset modes from normal, nature, sleep, fresh, smart, strong, off.
  • in a couple of cases, off has been used when some other feature is off (ie for fan-only).
  • breeze mostly maps to nature, unless it was already assigned in which case fresh is used.
  • low, mid, high are generally mapped to sleep, fresh, strong. This disambiguates presets from speeds.
  • auto, manual are generally mapped to smart, normal

New WiFi Devices

• Simple six switch power strip #795
• position_blinds: a copy of simple_blindsbut with accurate position #715, #794
• Lytmi HDMI sync backlight #790
• Inkbird iBBQ-4T cooking thermometer #750
• Carro PN-04F02D fan/light switch #800
• ZX-DB11 doorbell alarm system #763
• Arlec ceiling fan and light remote control kit #806
• Daewoo DHome air conditioner #807
• Immax Neo Lite Vento fan #811
• Lucking HS6 lock #796
• Blitzwolf BW-IS6 alarm control panel #112
• Neo Coolcam siren #673
• Iebeyond ECH doorbell #815
• Costway portable airconditioner #814
• ZX-CS21 gas leak detector and alarm #679
• Mantra ceiling fan #680
• Aulifants SMES200 breaker switch #683
• Tampa LED lighting system #686

New Bluetoth Devices

• Adaprox Fingerbot Plus #795

New Zigbee Devices

• CO2 Box air quality monitor #793

Improvements to existing devices

• Petlibro feeder: improved compatibility #759
• Kogan LX10 vacuum: improved compatibility and functions #768
• Klarstein Dryfy: deprecate the fan in favor of humidifier modes.
• Proscenic A8: fixed dps assignment #803
• Weau v2: add preset mode support #808
• TOMPD-63LW: phase data is encoded in 8 bytes not 11. #577, #388
• ZX-G30: add an alarm_control_panel entity and deprecate individual buttons #796, #490
• Orion siren: mark compatibility with Elesion siren #816
• Anko fan: Fan speed is a string #22
• Weau 13kW: minor config cleanup

General improvements

• camera: init base class (also other entities, but camera was the only one that does anything in its init function) #759
• avoid applying null mappings in reverse #759, #810
• Translations for dehumidifier laundry and purify modes. #682
• cover: duplicate position to current_position for devices where it is known to be accurate. Return open for intermediate values if position is known. #715, #794
• French: add translations for climate and humidifier platforms. #805
• Add support for alarm_control_panel platform #796
• Keep the order of lists of values #808
• polling: correctly wait between polls #824

Documentation improvements

• new platforms added and platform list sorted.
• Updated Tuya portal instructions after a rearrangement of their API Explorer #823