diff --git a/assets/images/950-closeup.jpg b/assets/images/950-closeup.jpg
new file mode 100644
index 0000000..d6a8a21
Binary files /dev/null and b/assets/images/950-closeup.jpg differ
diff --git a/assets/images/950.jpg b/assets/images/950.jpg
new file mode 100644
index 0000000..796b912
Binary files /dev/null and b/assets/images/950.jpg differ
diff --git a/assets/images/prisma_990.jpg b/assets/images/prisma_990.jpg
new file mode 100644
index 0000000..a0d3136
Binary files /dev/null and b/assets/images/prisma_990.jpg differ
diff --git a/prismas.markdown b/prismas.markdown
new file mode 100644
index 0000000..b7cba53
--- /dev/null
+++ b/prismas.markdown
@@ -0,0 +1,25 @@
+---
+title: Husqvarna Prisma
+layout: normal
+keywords: "Husqvarna Prisma, viking 7000, sewing machines, sewing, vintage, melbourne"
+description: "Sewing machine services with more than 10 years experience based in Melbourne, Australia"
+
+---
+<div class="container justify-content-center">
+<div class="row">
+<div class="col-12 mb-1">
+<h2>How good are they?</h2>
+<p class="has-large-font">
+They're pretty good, as far as computerised machines go. But, as with all Husqvarnas, they have weaknesses.
+</p>
+<h2>The Weaknesses</h2>
+<p class="has-large-font">
+The accessory tray. Both the front and rear plastic flaps can break.
+</p>
+<p class="has-large-font">
+Electronics. Components on the circuit boards can burn out. Also, components on the power board. The most common to burn out are diodes and capacitors. I currently have a 950 board that has a blown diode. I replaced the diode and this blew immediately. Making the board work again involves determing and replacing whatever is causing the diodes to burn out. The capacitor is the most likely cause. I'll need to remove components and test them.
+</p>
+</div><!-- end col -->
+</div><!-- end row -->
+</div><!-- end container -->
+