Skip to content

Latest commit

 

History

History
90 lines (61 loc) · 6.26 KB

troubleshooting.md

File metadata and controls

90 lines (61 loc) · 6.26 KB
Raw

Troubleshooting

General

Connectivity

In Docker v1.13 and later, the default iptables forwarding policy was changed to DROP. For more detail on the Docker change, see the Docker documentation.

This problems manifests itself as connectivity problems between containers running on different hosts. To resolve it upgrade to the latest version of flannel.

Logging

Flannel uses the klog library but only supports logging to stderr. The severity level can't be changed but the verbosity can be changed with the -v option. Flannel does not make extensive use of the verbosity level but increasing the value from 0 (the default) will result in some additional logs. To get the most detailed logs, use -v=10

-v value
    	log level for V logs
-vmodule value
    	comma-separated list of pattern=N settings for file-filtered logging
-log_backtrace_at value
    	when logging hits line file:N, emit a stack trace

When running under systemd (e.g. on CoreOS Container Linux) the logs can be viewed with journalctl -u flanneld

When flannel is running as a pod on Kubernetes, the logs can be viewed with kubectl logs --namespace kube-system <POD_ID> -c kube-flannel. You can find the pod IDs with kubectl get pod --namespace kube-system -l app=flannel

Interface selection and the public IP.

Most backends require that each node has a unique "public IP" address. This address is chosen when flannel starts. Because leases are tied to the public address, if the address changes, flannel must be restarted.

The interface chosen and the public IP in use is logged out during startup, e.g.

I0629 14:28:35.866793    5522 main.go:386] Determining IP address of default interface
I0629 14:28:35.866987    5522 main.go:399] Using interface with name enp62s0u1u2 and address 172.24.17.174
I0629 14:28:35.867000    5522 main.go:412] Using 10.10.10.10 as external address

Vagrant

Vagrant typically assigns two interfaces to all VMs. The first, for which all hosts are assigned the IP address 10.0.2.15, is for external traffic that gets NATed.

This may lead to problems with flannel. By default, flannel selects the first interface on a host. This leads to all hosts thinking they have the same public IP address. To prevent this issue, pass the --iface=eth1 flag to flannel so that the second interface is chosen.

Permissions

Depending on the backend being used, flannel may need to run with super user permissions. Examples include creating VXLAN devices or programming routes. If you see errors similar to the following, confirm that the user running flannel has the right permissions (or try running with sudo).

  • Error adding route...
  • Add L2 failed
  • Failed to set up IP Masquerade
  • Error registering network: operation not permitted

Performance

Control plane

Flannel is known to scale to a very large number of hosts. A delay in contacting pods in a newly created host may indicate control plane problems. Flannel doesn't need much CPU or RAM but the first thing to check would be that it has adaquate resources available. Flannel is also reliant on the performance of the datastore, either etcd or the Kubernetes API server. Check that they are performing well.

Data plane

Flannel relies on the underlying network so that's the first thing to check if you're seeing poor data plane performance.

There are two flannel specific choices that can have a big impact on performance

  1. The type of backend. For example, if encapsulation is used, vxlan will always perform better than udp. For maximum data plane performance, avoid encapsulation.
  2. The size of the MTU can have a large impact. To achieve maximum raw bandwidth, a network supporting a large MTU should be used. Flannel writes an MTU setting to the subnet.env file. This file is read by either the Docker daemon or the CNI flannel plugin which does the networking for individual containers. To troubleshoot, first ensure that the network interface that flannel is using has the right MTU. Then check that the correct MTU is written to the subnet.env. Finally, check that the containers have the correct MTU on their virtual ethernet device.

Firewalls

When using udp backend, flannel uses UDP port 8285 for sending encapsulated packets.

When using vxlan backend, kernel uses UDP port 8472 for sending encapsulated packets.

Make sure that your firewall rules allow this traffic for all hosts participating in the overlay network.

Make sure that your firewall rules allow traffic from pod network cidr visit your kubernetes master node.

Kubernetes Specific

The flannel kube subnet manager relies on the fact that each node already has a podCIDR defined.

You can check the podCidr for your nodes with one of the following two commands

  • kubectl get nodes -o jsonpath='{.items[*].spec.podCIDR}'
  • kubectl get nodes -o template --template={{.spec.podCIDR}}

If your nodes do not have a podCIDR, then either use the --pod-cidr kubelet command-line option or the --allocate-node-cidrs=true --cluster-cidr=<cidr> controller-manager command-line options.

If kubeadm is being used then pass --pod-network-cidr=10.244.0.0/16 to kubeadm init which will ensure that all nodes are automatically assigned a podCIDR.

It's possible (but not generally recommended) to manually set the podCIDR to a fixed value for each node. The node subnet ranges must not overlap.

  • kubectl patch node <NODE_NAME> -p '{"spec":{"podCIDR":"<SUBNET>"}}'

Log messages

  • failed to read net conf - flannel expects to be able to read the net conf from "/etc/kube-flannel/net-conf.json". In the provided manifest, this is set up in the kube-flannel-cfg ConfigMap.
  • error parsing subnet config - The net conf is malformed. Double check that it has the right content and is valid JSON.
  • node <NODE_NAME> pod cidr not assigned - The node doesn't have a podCIDR defined. See above for more info.
  • Failed to create SubnetManager: error retrieving pod spec for 'kube-system/kube-flannel-ds-abc123': the server does not allow access to the requested resource - The kubernetes cluster has RBAC enabled. Run https://raw.githubusercontent.com/coreos/flannel/master/Documentation/k8s-manifests/kube-flannel-rbac.yml