From 296a4c269e12fe6e1d0ad1e5f7158eeae1c146eb Mon Sep 17 00:00:00 2001 From: Dinesh Arasu Date: Mon, 13 May 2024 15:37:03 +0530 Subject: [PATCH] MPAE-15913 Fixed the PR review comments --- README.md | 34 +++++++++++++++++----------------- 1 file changed, 17 insertions(+), 17 deletions(-) diff --git a/README.md b/README.md index 5238042..af76c11 100644 --- a/README.md +++ b/README.md @@ -27,9 +27,9 @@ - [Summary](#summary)
-- **Note:** +- **Notes**: - 1. In the below project creation steps where ever RNBD is mentioned is applicable for both RNBD451 and RNBD350 devices. + 1. The project creation steps where RNBD is mentioned are applicable for both RNBD451 and RNBD350 devices.
2. The Over-the-Air (OTA) Device Firmware Update (DFU) support is not applicable for RNBD350-based applications because the OTA DFU for RNBD350 is implemented using the Host Microcontroller (MCU) DFU process. OTA is not supported for 8-bit applications due to memory limitation. @@ -84,7 +84,7 @@ This library uses one Universal Asynchronous Receiver and Transmitter (UART), on - [MPLAB® X IDE 6.20](http://www.microchip.com/mplab/mplab-x-ide) or newer - [MPLAB XC8 2.46](http://www.microchip.com/mplab/compilers) or newer -- [MPLAB Code Configurator 5.3.7](https://www.microchip.com/mplab/mplab-code-configurator) or newer +- [MPLAB Code Configurator 5.5.1](https://www.microchip.com/mplab/mplab-code-configurator) or newer - [MPLAB Code Configurator](https://www.microchip.com/mplab/mplab-code-configurator) Device Libraries PIC10 / PIC12 / PIC16 / PIC18 Microcontrollers (MCUs) - [MPLAB Code Configurator](https://www.microchip.com/mplab/mplab-code-configurator) Device Libraries PIC® MCUs - [Microchip PIC18F-Q\_DFP Series Device Support \(1.25.433\)](https://packs.download.microchip.com/) or newer @@ -112,17 +112,17 @@ This library uses one Universal Asynchronous Receiver and Transmitter (UART), on ## RN487x Pin Mapping and Hardware Setup - Pin mapping table between the MCU and the RN487x Click: - | S.no | Pin Functionality | PIC | RN487x Click | - |------|-------------------|-----|--------------| - | 1 | Receive (RxD) | RB3 | Tx | - | 2 | Transmit (TxD) | RB0 | Rx | - | 3 | BT_RST | RC7 | RST | + | S. No | Pin Functionality | PIC | RN487x Click | + |-------|-------------------|-----|--------------| + | 1 | Receive (RxD) | RB3 | Tx | + | 2 | Transmit (TxD) | RB0 | Rx | + | 3 | BT_RST | RC7 | RST | - Connect the development board of your choice and then connect the RN487x to the proper slot. The image below shows how to connect the RN487x Click to **Slot 2**. ![](images/GUID-A52CEC62-AA5A-441A-A17E-8551FAF5C9ED-low.png) - **Important:** The Slot was decided based on the UART instances which were configured for this example application (see the pin mapping table between the MCU and the RN487x Click). + **Important:** The slot was decided based on the UART instances which were configured for this example application (see the pin mapping table between the MCU and the RN487x Click). # Software Prerequisite @@ -370,7 +370,7 @@ Configuration settings:
- For Status Indication Pins 1 and 2, the checkboxes in the Default Analog, Start High, Weak Pullup, Slew Rate and Input Level Control columns will be checked. + For Status Indication pins 1 and 2, Analog, Start High, Weak Pullup, Slew Rate and Input Level Control columns will be checked by default during the time of pin selection.
@@ -416,11 +416,11 @@ Configuration settings: - Pin mapping Table between the MCU and RNBD Click
- |S.no|Pin Functionality|PIC|RNBD Click | - |----|-----------------|---|---------- | - | 1 |Receive (RxD) |RB3| Tx | - | 2 |Transmit (TxD) |RB0| Rx | - | 3 |BT_RST |RC7| RST | + |S. No|Pin Functionality|PIC|RNBD Click | + |-----|-----------------|---|------------| + | 1 |Receive (RxD) |RB3| Tx | + | 2 |Transmit (TxD) |RB0| Rx | + | 3 |BT_RST |RC7| RST |
@@ -482,7 +482,7 @@ The `#define DEMO_PERIODIC_TRANSMIT_COUNT (10000)` and `#define DEMO_PERIODIC_CH ![](images/GUID-65CA4B07-2C54-4799-A9AE-826FD83B676D-low.png) 7. Select "Listen for notifications" on the application. - - It may be required to enable app notifications on the phone. Data will be sent periodically to the device and will be visible beneath the Notify/Listen setting + - It may be required to enable app notifications on the phone. Data will be sent periodically to the device and will be visible beneath the Notify/Listen setting. - Before turning on the Notify/Indicate setting
![](images/GUID-C5223277-D33D-4366-8CA4-124D340F0554-low.png) @@ -681,7 +681,7 @@ Configuration for PIC Transparent UART was completed. Click [here](#rn487x-code-
|S. No|Pin Functionality|PIC|RN487x Click| - |-----|-----------------|---|---------- | + |-----|-----------------|---|------------| | 1 |Receive (RxD) |RB3| Tx | | 2 |Transmit (TxD) |RB0| Rx | | 3 |BT_RST |RC7| RST |