init.lua

--[[
             _ __    __        _ 
  ___ _   __(_) /___/ /___    (_)___ 
 / _ \ | / / / / __  / __ \  / / __ \
/  __/ |/ / / / /_/ / /_/ / / / /_/ /
\___/|___/_/_/\__,_/\____/_/ /\____/ .com
                        /___/        

      - https://learnxinyminutes.com/docs/lua/
    - :help lua-guide
    - (or HTML version): https://neovim.io/doc/user/lua-guide.html
  TODO: The very first thing you should do is to run the command `:Tutor` in Neovim.

  Next, run AND READ `:help`.
    This will open up a help window with some basic information
    about reading, navigating and searching the builtin help documentation.

    MOST IMPORTANTLY, we provide a keymap "<space>sh" to [s]earch the [h]elp documentation,
    which is very useful when you're not sure exactly what you're looking for.

--]]

-- Set <space> as the leader key
-- See `:help mapleader`
--  NOTE: Must happen before plugins are loaded (otherwise wrong leader will be used)
vim.g.mapleader = " "
vim.g.maplocalleader = " "

vim.lsp.set_log_level("off")

-- [[ Setting options ]]
-- See `:help vim.opt`
--  For more options, you can see `:help option-list`
-- Make line numbers default
vim.opt.number = true
-- You can also add relative line numbers, for help with jumping.
--  Experiment for yourself to see if you like it!
-- vim.opt.relativenumber = true
-- Enable mouse mode, can be useful for resizing splits for example!
vim.opt.mouse = "a"
-- Don't show the mode, since it's already in status line
vim.opt.showmode = false
-- Sync clipboard between OS and Neovim.
--  Remove this option if you want your OS clipboard to remain independent.
--  See `:help 'clipboard'`
vim.opt.clipboard = "unnamedplus"
-- Enable break indent
vim.opt.breakindent = true
-- Save undo history
vim.opt.undofile = true
-- Case-insensitive searching UNLESS \C or capital in search
vim.opt.ignorecase = true
vim.opt.smartcase = true
-- Keep signcolumn on by default
vim.opt.signcolumn = "yes"
-- Decrease update time
vim.opt.updatetime = 200
vim.opt.timeoutlen = 350
-- Configure how new splits should be opened
vim.opt.splitright = true
vim.opt.splitbelow = true
-- Sets how neovim will display certain whitespace in the editor.
--  See `:help 'list'`
--  and `:help 'listchars'`
vim.opt.list = true
vim.opt.listchars = { tab = "» ", trail = "·", nbsp = "␣" }
-- Preview substitutions live, as you type!
vim.opt.inccommand = "split"
-- Show which line your cursor is on
vim.opt.cursorline = true
-- Minimal number of screen lines to keep above and below the cursor.
vim.opt.scrolloff = 10
-- [[ Basic Keymaps ]]
--  See `:help vim.keymap.set()`
-- Set highlight on search, but clear on pressing <Esc> in normal mode
vim.opt.hlsearch = true
vim.keymap.set("n", "<Esc>", "<cmd>nohlsearch<CR>")

-- Diagnostic keymaps
--vim.keymap.set("n", "[d", vim.diagnostic.goto_prev, { desc = "Go to previous [D]iagnostic message" })
--vim.keymap.set("n", "]d", vim.diagnostic.goto_next, { desc = "Go to next [D]iagnostic message" })
vim.keymap.set("n", "<leader>e", vim.diagnostic.open_float, { desc = "Show diagnostic [E]rror messages" })
vim.keymap.set("n", "<leader>q", vim.diagnostic.setloclist, { desc = "Open diagnostic [Q]uickfix list" })

-- Exit terminal mode in the builtin terminal with a shortcut that is a bit easier
-- for people to discover. Otherwise, you normally need to press <C-\><C-n>, which
-- is not what someone will guess without a bit more experience.
--
-- NOTE: This won't work in all terminal emulators/tmux/etc. Try your own mapping
-- or just use <C-\><C-n> to exit terminal mode
vim.keymap.set("t", "<Esc><Esc>", "<C-\\><C-n>", { desc = "Exit terminal mode" })

-- Keybinds to make split navigation easier.
--  Use CTRL+<hjkl> to switch between windows
--
--  See `:help wincmd` for a list of all window commands
--vim.keymap.set("n", "<c-h>", "<c-w><c-h>", { desc = "move focus to the left window" })
--vim.keymap.set("n", "<c-l>", "<c-w><c-l>", { desc = "move focus to the right window" })
--vim.keymap.set("n", "<c-j>", "<c-w><c-j>", { desc = "move focus to the lower window" })
--vim.keymap.set("n", "<c-k>", "<c-w><c-k>", { desc = "move focus to the upper window" })

-- [[ Basic Autocommands ]]
--  See `:help lua-guide-autocommands`

-- Highlight when yanking (copying) text
--  Try it with `yap` in normal mode
--  See `:help vim.highlight.on_yank()`
vim.api.nvim_create_autocmd("TextYankPost", {
	desc = "Highlight when yanking (copying) text",
	group = vim.api.nvim_create_augroup("kickstart-highlight-yank", { clear = true }),
	callback = function()
		vim.highlight.on_yank()
	end,
})

-- [[ Install `lazy.nvim` plugin manager ]]
--    See `:help lazy.nvim.txt` or https://github.com/folke/lazy.nvim for more info
local lazypath = vim.fn.stdpath("data") .. "/lazy/lazy.nvim"
if not vim.loop.fs_stat(lazypath) then
	local lazyrepo = "https://github.com/folke/lazy.nvim.git"
	vim.fn.system({ "git", "clone", "--filter=blob:none", "--branch=stable", lazyrepo, lazypath })
end ---@diagnostic disable-next-line: undefined-field
vim.opt.rtp:prepend(lazypath)

--  To check the current status of your plugins, run
--    :Lazy
--
--  You can press `?` in this menu for help. Use `:q` to close the window
--
--  To update plugins, you can run
--    :Lazy update
--
-- NOTE: Here is where you install your plugins.
require("lazy").setup({
	-- NOTE: Plugins can be added with a link (or for a github repo: 'owner/repo' link).
	--"tpope/vim-sleuth", -- Detect tabstop and shiftwidth automatically

	-- NOTE: Plugins can also be added by using a table,
	-- with the first argument being the link and the following
	-- keys can be used to configure plugin behavior/loading/etc.
	--
	-- Use `opts = {}` to force a plugin to be loaded.
	--
	--  This is equivalent to:
	--    require('Comment').setup({})

	-- "gc" to comment visual regions/lines
	{ "numToStr/Comment.nvim", opts = {} },

	-- Here is a more advanced example where we pass configuration
	-- options to `gitsigns.nvim`. This is equivalent to the following lua:
	--    require('gitsigns').setup({ ... })
	--
	-- See `:help gitsigns` to understand what the configuration keys do
	{ -- Adds git related signs to the gutter, as well as utilities for managing changes
		"lewis6991/gitsigns.nvim",
		opts = {
			signs = {
				add = { text = "+" },
				change = { text = "~" },
				delete = { text = "_" },
				topdelete = { text = "‾" },
				changedelete = { text = "~" },
			},
		},
	},

	-- NOTE: Plugins can also be configured to run lua code when they are loaded.
	--
	-- This is often very useful to both group configuration, as well as handle
	-- lazy loading plugins that don't need to be loaded immediately at startup.
	--
	-- For example, in the following configuration, we use:
	--  event = 'VimEnter'
	--
	-- which loads which-key before all the UI elements are loaded. Events can be
	-- normal autocommands events (`:help autocmd-events`).
	--
	-- Then, because we use the `config` key, the configuration only runs
	-- after the plugin has been loaded:
	--  config = function() ... end

	--{ -- Useful plugin to show you pending keybinds.
	--	"folke/which-key.nvim",
	--	event = "VimEnter", -- Sets the loading event to 'VimEnter'
	--	config = function() -- This is the function that runs, AFTER loading
	--		require("which-key").setup()
	--
	-- Document existing key chains
	--		require("which-key").register({
	--			["<leader>c"] = { name = "[C]ode", _ = "which_key_ignore" },
	--			["<leader>d"] = { name = "[D]ocument", _ = "which_key_ignore" },
	--			["<leader>r"] = { name = "[R]ename", _ = "which_key_ignore" },
	--			["<leader>s"] = { name = "[S]earch", _ = "which_key_ignore" },
	--			["<leader>w"] = { name = "[W]orkspace", _ = "which_key_ignore" },
	--		})
	--	end,
	--},

	{
		"ThePrimeagen/harpoon",
		branch = "harpoon2",
		dependencies = { "nvim-lua/plenary.nvim" },
	},

	-- NOTE: Plugins can specify dependencies.
	--
	-- The dependencies are proper plugin specifications as well - anything
	-- you do for a plugin at the top level, you can do for a dependency.
	--
	-- Use the `dependencies` key to specify the dependencies of a particular plugin

	{ -- Fuzzy Finder (files, lsp, etc)
		"nvim-telescope/telescope.nvim",
		event = "VimEnter",
		branch = "0.1.x",
		dependencies = {
			"nvim-lua/plenary.nvim",
			{ -- If encountering errors, see telescope-fzf-native README for install instructions
				"nvim-telescope/telescope-fzf-native.nvim",

				-- `build` is used to run some command when the plugin is installed/updated.
				-- This is only run then, not every time Neovim starts up.
				build = "make",

				-- `cond` is a condition used to determine whether this plugin should be
				-- installed and loaded.
				cond = function()
					return vim.fn.executable("make") == 1
				end,
			},
			{ "nvim-telescope/telescope-ui-select.nvim" },

			-- Useful for getting pretty icons, but requires special font.
			--  If you already have a Nerd Font, or terminal set up with fallback fonts
			--  you can enable this
			-- { 'nvim-tree/nvim-web-devicons' }
		},
		config = function()
			-- Telescope is a fuzzy finder that comes with a lot of different things that
			-- it can fuzzy find! It's more than just a "file finder", it can search
			-- many different aspects of Neovim, your workspace, LSP, and more!
			--
			-- The easiest way to use telescope, is to start by doing something like:
			--  :Telescope help_tags
			--
			-- After running this command, a window will open up and you're able to
			-- type in the prompt window. You'll see a list of help_tags options and
			-- a corresponding preview of the help.
			--
			-- Two important keymaps to use while in telescope are:
			--  - Insert mode: <c-/>
			--  - Normal mode: ?
			--
			-- This opens a window that shows you all of the keymaps for the current
			-- telescope picker. This is really useful to discover what Telescope can
			-- do as well as how to actually do it!

			-- [[ Configure Telescope ]]
			-- See `:help telescope` and `:help telescope.setup()`
			require("telescope").setup({
				-- You can put your default mappings / updates / etc. in here
				--  All the info you're looking for is in `:help telescope.setup()`
				extensions = {
					["ui-select"] = {
						require("telescope.themes").get_dropdown(),
					},
				},
			})
			-- Enable telescope extensions, if they are installed
			pcall(require("telescope").load_extension, "fzf")
			pcall(require("telescope").load_extension, "ui-select")
			-- See `:help telescope.builtin`
			local builtin = require("telescope.builtin")
			vim.keymap.set("n", "<leader>sh", builtin.help_tags, { desc = "[S]earch [H]elp" })
			vim.keymap.set("n", "<leader>sk", builtin.keymaps, { desc = "[S]earch [K]eymaps" })
			vim.keymap.set("n", "<leader>sf", builtin.find_files, { desc = "[S]earch [F]iles" })
			vim.keymap.set("n", "<leader>ss", builtin.builtin, { desc = "[S]earch [S]elect Telescope" })
			vim.keymap.set("n", "<leader>sw", builtin.grep_string, { desc = "[S]earch current [W]ord" })
			vim.keymap.set("n", "<leader>sg", builtin.live_grep, { desc = "[S]earch by [G]rep" })
			vim.keymap.set("n", "<leader>sd", builtin.diagnostics, { desc = "[S]earch [D]iagnostics" })
			vim.keymap.set("n", "<leader>sr", builtin.resume, { desc = "[S]earch [R]esume" })
			vim.keymap.set("n", "<leader>s.", builtin.oldfiles, { desc = '[S]earch Recent Files ("." for repeat)' })
			vim.keymap.set("n", "<leader><leader>", builtin.buffers, { desc = "[ ] Find existing buffers" })
			-- Slightly advanced example of overriding default behavior and theme
			vim.keymap.set("n", "<leader>/", function()
				-- You can pass additional configuration to telescope to change theme, layout, etc.
				builtin.current_buffer_fuzzy_find(require("telescope.themes").get_dropdown({
					winblend = 10,
					previewer = false,
				}))
			end, { desc = "[/] Fuzzily search in current buffer" })
			-- Also possible to pass additional configuration options.
			--  See `:help telescope.builtin.live_grep()` for information about particular keys
			vim.keymap.set("n", "<leader>s/", function()
				builtin.live_grep({
					grep_open_files = true,
					prompt_title = "Live Grep in Open Files",
				})
			end, { desc = "[S]earch [/] in Open Files" })
			-- Shortcut for searching your neovim configuration files
			--vim.keymap.set("n", "<leader>sn", function()
			--	builtin.find_files({ cwd = vim.fn.stdpath("config") })
			--end, { desc = "[S]earch [N]eovim files" })
		end,
	},

	{ -- LSP Configuration & Plugins
		"neovim/nvim-lspconfig",
		dependencies = {
			-- Automatically install LSPs and related tools to stdpath for neovim
			"williamboman/mason.nvim",
			"williamboman/mason-lspconfig.nvim",
			"WhoIsSethDaniel/mason-tool-installer.nvim",

			-- Useful status updates for LSP.
			-- NOTE: `opts = {}` is the same as calling `require('fidget').setup({})`
			{ "j-hui/fidget.nvim", opts = {} },
		},
		config = function()
			-- Brief Aside: **What is LSP?**
			--
			-- LSP is an acronym you've probably heard, but might not understand what it is.
			--
			-- LSP stands for Language Server Protocol. It's a protocol that helps editors
			-- and language tooling communicate in a standardized fashion.
			--
			-- In general, you have a "server" which is some tool built to understand a particular
			-- language (such as `gopls`, `lua_ls`, `rust_analyzer`, etc). These Language Servers
			-- (sometimes called LSP servers, but that's kind of like ATM Machine) are standalone
			-- processes that communicate with some "client" - in this case, Neovim!
			--
			-- LSP provides Neovim with features like:
			--  - Go to definition
			--  - Find references
			--  - Autocompletion
			--  - Symbol Search
			--  - and more!
			--
			-- Thus, Language Servers are external tools that must be installed separately from
			-- Neovim. This is where `mason` and related plugins come into play.
			--
			-- If you're wondering about lsp vs treesitter, you can check out the wonderfully
			-- and elegantly composed help section, `:help lsp-vs-treesitter`

			--  This function gets run when an LSP attaches to a particular buffer.
			--    That is to say, every time a new file is opened that is associated with
			--    an lsp (for example, opening `main.rs` is associated with `rust_analyzer`) this
			--    function will be executed to configure the current buffer
			vim.api.nvim_create_autocmd("LspAttach", {
				group = vim.api.nvim_create_augroup("kickstart-lsp-attach", { clear = true }),
				callback = function(event)
					-- NOTE: Remember that lua is a real programming language, and as such it is possible
					-- to define small helper and utility functions so you don't have to repeat yourself
					-- many times.
					--
					-- In this case, we create a function that lets us more easily define mappings specific
					-- for LSP related items. It sets the mode, buffer and description for us each time.
					local map = function(keys, func, desc)
						vim.keymap.set("n", keys, func, { buffer = event.buf, desc = "LSP: " .. desc })
					end

					-- Jump to the definition of the word under your cursor.
					--  This is where a variable was first declared, or where a function is defined, etc.
					--  To jump back, press <C-T>.
					map("gd", require("telescope.builtin").lsp_definitions, "[G]oto [D]efinition")
					-- Find references for the word under your cursor.
					map("gr", require("telescope.builtin").lsp_references, "[G]oto [R]eferences")
					-- Jump to the implementation of the word under your cursor.
					--  Useful when your language has ways of declaring types without an actual implementation.
					map("gI", require("telescope.builtin").lsp_implementations, "[G]oto [I]mplementation")
					-- Jump to the type of the word under your cursor.
					--  Useful when you're not sure what type a variable is and you want to see
					--  the definition of its *type*, not where it was *defined*.
					map("<leader>D", require("telescope.builtin").lsp_type_definitions, "Type [D]efinition")
					-- Fuzzy find all the symbols in your current document.
					--  Symbols are things like variables, functions, types, etc.
					map("<leader>ds", require("telescope.builtin").lsp_document_symbols, "[D]ocument [S]ymbols")
					-- Fuzzy find all the symbols in your current workspace
					--  Similar to document symbols, except searches over your whole project.
					map(
						"<leader>ws",
						require("telescope.builtin").lsp_dynamic_workspace_symbols,
						"[W]orkspace [S]ymbols"
					)

					-- Rename the variable under your cursor
					--  Most Language Servers support renaming across files, etc.
					map("<leader>rn", vim.lsp.buf.rename, "[R]e[n]ame")

					-- Execute a code action, usually your cursor needs to be on top of an error
					-- or a suggestion from your LSP for this to activate.
					map("<leader>ca", vim.lsp.buf.code_action, "[C]ode [A]ction")

					-- Opens a popup that displays documentation about the word under your cursor
					--  See `:help K` for why this keymap
					map("K", vim.lsp.buf.hover, "Hover Documentation")

					-- WARN: This is not Goto Definition, this is Goto Declaration.
					--  For example, in C this would take you to the header
					map("gD", vim.lsp.buf.declaration, "[G]oto [D]eclaration")

					-- The following two autocommands are used to highlight references of the
					-- word under your cursor when your cursor rests there for a little while.
					--    See `:help CursorHold` for information about when this is executed
					--
					-- When you move your cursor, the highlights will be cleared (the second autocommand).
					local client = vim.lsp.get_client_by_id(event.data.client_id)
					if client and client.server_capabilities.documentHighlightProvider then
						vim.api.nvim_create_autocmd({ "CursorHold", "CursorHoldI" }, {
							buffer = event.buf,
							callback = vim.lsp.buf.document_highlight,
						})

						vim.api.nvim_create_autocmd({ "CursorMoved", "CursorMovedI" }, {
							buffer = event.buf,
							callback = vim.lsp.buf.clear_references,
						})
					end
				end,
			})

			-- LSP servers and clients are able to communicate to each other what features they support.
			--  By default, Neovim doesn't support everything that is in the LSP Specification.
			--  When you add nvim-cmp, luasnip, etc. Neovim now has *more* capabilities.
			--  So, we create new capabilities with nvim cmp, and then broadcast that to the servers.
			local capabilities = vim.lsp.protocol.make_client_capabilities()
			capabilities = vim.tbl_deep_extend("force", capabilities, require("cmp_nvim_lsp").default_capabilities())

			-- Enable the following language servers
			--  Feel free to add/remove any LSPs that you want here. They will automatically be installed.
			--
			--  Add any additional override configuration in the following tables. Available keys are:
			--  - cmd (table): Override the default command used to start the server
			--  - filetypes (table): Override the default list of associated filetypes for the server
			--  - capabilities (table): Override fields in capabilities. Can be used to disable certain LSP features.
			--  - settings (table): Override the default settings passed when initializing the server.
			--        For example, to see the options for `lua_ls`, you could go to: https://luals.github.io/wiki/settings/
			local servers = {
				clangd = {
					cmd = { "clangd", "--offset-encoding=utf-16" },
				},
				-- gopls = {},
				-- pyright = {},
				-- rust_analyzer = {},
				-- ... etc. See `:help lspconfig-all` for a list of all the pre-configured LSPs
				--
				-- Some languages (like typescript) have entire language plugins that can be useful:
				--    https://github.com/pmizio/typescript-tools.nvim
				--
				-- But for many setups, the LSP (`tsserver`) will work just fine
				-- tsserver = {},
				--

				lua_ls = {
					-- cmd = {...},
					-- filetypes { ...},
					-- capabilities = {},
					settings = {
						Lua = {
							runtime = { version = "LuaJIT" },
							workspace = {
								checkThirdParty = false,
								-- Tells lua_ls where to find all the Lua files that you have loaded
								-- for your neovim configuration.
								library = {
									"${3rd}/luv/library",
									unpack(vim.api.nvim_get_runtime_file("", true)),
								},
								-- If lua_ls is really slow on your computer, you can try this instead:
								-- library = { vim.env.VIMRUNTIME },
							},
							completion = {
								callSnippet = "Replace",
							},
							-- You can toggle below to ignore Lua_LS's noisy `missing-fields` warnings
							-- diagnostics = { disable = { 'missing-fields' } },
						},
					},
				},
			}

			-- Ensure the servers and tools above are installed
			--  To check the current status of installed tools and/or manually install
			--  other tools, you can run
			--    :Mason
			--
			--  You can press `g?` for help in this menu
			require("mason").setup()

			-- You can add other tools here that you want Mason to install
			-- for you, so that they are available from within Neovim.
			local ensure_installed = vim.tbl_keys(servers or {})
			vim.list_extend(ensure_installed, {
				"stylua", -- Used to format lua code
			})
			require("mason-tool-installer").setup({ ensure_installed = ensure_installed })

			require("mason-lspconfig").setup({
				handlers = {
					function(server_name)
						local server = servers[server_name] or {}
						-- This handles overriding only values explicitly passed
						-- by the server configuration above. Useful when disabling
						-- certain features of an LSP (for example, turning off formatting for tsserver)
						server.capabilities = vim.tbl_deep_extend("force", {}, capabilities, server.capabilities or {})
						require("lspconfig")[server_name].setup(server)
					end,
				},
			})
		end,
	},

	{ -- Autoformat
		"stevearc/conform.nvim",
		opts = {
			formatters = {
				stylua = {
					command = "stylua",
					args = { "-" },
					rootPatterns = { ".stylua.toml", "stylua.toml" },
				},
				clang_format = { command = "clang-format", args = { "-assume-filename=%filepath" } },
			},
			notify_on_error = true,
			format_on_save = {
				timeout_ms = 500,
				lsp_fallback = true,
			},
			formatters_by_ft = {
				lua = { "stylua" },
				go = { "gofmt", "goimports" },
				python = { "black" },
				--html = { "prettierd" },
				c = { "clang_format" },
				cpp = { "clang_format" },
				zsh = { "shfmt" },
				--css = { "prettierd" },
				--javascript = { "prettierd" },
				asm = { "asmfmt" },
				x86 = { "asmfmt" },
				x86_64 = { "asmfmt" },
				--Makefile = { "prettierd" },
				markdown = { "mdformat" },
				rust = { "rustfmt" },
				--Conform can also run multiple formatters sequentially
				--python = { "isort", "black" },

				--You can use a sub-list to tell conform to run *until* a formatter
				--is found.
				-- javascript = { { "prettierd", "prettier" } },
			},
		},
	},

	{ -- Autocompletion
		"hrsh7th/nvim-cmp",
		event = "InsertEnter",
		dependencies = {
			-- Snippet Engine & its associated nvim-cmp source
			{
				"L3MON4D3/LuaSnip",
				build = (function()
					-- Build Step is needed for regex support in snippets
					-- This step is not supported in many windows environments
					-- Remove the below condition to re-enable on windows
					if vim.fn.has("win32") == 1 or vim.fn.executable("make") == 0 then
						return
					end
					return "make install_jsregexp"
				end)(),
			},
			"saadparwaiz1/cmp_luasnip",

			-- Adds other completion capabilities.
			--  nvim-cmp does not ship with all sources by default. They are split
			--  into multiple repos for maintenance purposes.
			"hrsh7th/cmp-nvim-lsp",
			"hrsh7th/cmp-path",

			-- If you want to add a bunch of pre-configured snippets,
			--    you can use this plugin to help you. It even has snippets
			--    for various frameworks/libraries/etc. but you will have to
			--    set up the ones that are useful for you.
			-- 'rafamadriz/friendly-snippets',
		},
		config = function()
			-- See `:help cmp`
			local cmp = require("cmp")
			local luasnip = require("luasnip")
			luasnip.config.setup({})

			cmp.setup({
				snippet = {
					expand = function(args)
						luasnip.lsp_expand(args.body)
					end,
				},
				completion = { completeopt = "menu,menuone,noinsert" },

				-- For an understanding of why these mappings were
				-- chosen, you will need to read `:help ins-completion`
				--
				-- No, but seriously. Please read `:help ins-completion`, it is really good!
				mapping = cmp.mapping.preset.insert({
					-- Select the [n]ext item
					["<C-n>"] = cmp.mapping.select_next_item(),
					-- Select the [p]revious item
					["<C-p>"] = cmp.mapping.select_prev_item(),

					-- Accept ([y]es) the completion.
					--  This will auto-import if your LSP supports it.
					--  This will expand snippets if the LSP sent a snippet.
					["<C-y>"] = cmp.mapping.confirm({ select = true }),

					-- Manually trigger a completion from nvim-cmp.
					--  Generally you don't need this, because nvim-cmp will display
					--  completions whenever it has completion options available.
					["<C-Space>"] = cmp.mapping.complete({}),

					-- Think of <c-l> as moving to the right of your snippet expansion.
					--  So if you have a snippet that's like:
					--  function $name($args)
					--    $body
					--  end
					--
					-- <c-l> will move you to the right of each of the expansion locations.
					-- <c-h> is similar, except moving you backwards.
					["<C-l>"] = cmp.mapping(function()
						if luasnip.expand_or_locally_jumpable() then
							luasnip.expand_or_jump()
						end
					end, { "i", "s" }),
					["<C-h>"] = cmp.mapping(function()
						if luasnip.locally_jumpable(-1) then
							luasnip.jump(-1)
						end
					end, { "i", "s" }),
				}),
				sources = {
					{ name = "nvim_lsp" },
					{ name = "luasnip" },
					{ name = "path" },
				},
			})
		end,
	},

	{ -- You can easily change to a different colorscheme.
		-- Change the name of the colorscheme plugin below, and then
		-- change the command in the config to whatever the name of that colorscheme is
		--
		-- If you want to see what colorschemes are already installed, you can use `:Telescope colorscheme`
		"folke/tokyonight.nvim",
		lazy = false, -- make sure we load this during startup if it is your main colorscheme
		priority = 1000, -- make sure to load this before all the other start plugins
		config = function()
			-- Load the colorscheme here
			vim.cmd.colorscheme("tokyonight-night")

			-- You can configure highlights by doing something like
			vim.cmd.hi("Comment gui=none")
		end,
	},

	-- Highlight todo, notes, etc in comments
	{
		"folke/todo-comments.nvim",
		event = "VimEnter",
		dependencies = { "nvim-lua/plenary.nvim" },
		opts = { signs = false },
	},

	--{ -- Collection of various small independent plugins/modules
	--	"echasnovski/mini.nvim",
	--	config = function()
	-- Better Around/Inside textobjects
	--
	-- Examples:
	--  - va)  - [V]isually select [A]round [)]paren
	--  - yinq - [Y]ank [I]nside [N]ext [']quote
	--  - ci'  - [C]hange [I]nside [']quote
	--		require("mini.ai").setup({ n_lines = 500 })
	-- Add/delete/replace surroundings (brackets, quotes, etc.)
	--
	-- - saiw) - [S]urround [A]dd [I]nner [W]ord [)]Paren
	-- - sd'   - [S]urround [D]elete [']quotes
	-- - sr)'  - [S]urround [R]eplace [)] [']
	--		require("mini.surround").setup()
	-- Simple and easy statusline.
	--  You could remove this setup call if you don't like it,
	--  and try some other statusline plugin
	--		local statusline = require("mini.statusline")
	--		statusline.setup()
	-- You can configure sections in the statusline by overriding their
	-- default behavior. For example, here we set the section for
	-- cursor location to LINE:COLUMN
	---@diagnostic disable-next-line: duplicate-set-field
	--		statusline.section_location = function()
	--			return "%2l:%-2v"
	--		end
	-- ... and there is more!
	--  Check out: https://github.com/echasnovski/mini.nvim
	--	end,
	--},

	{ -- Highlight, edit, and navigate code
		"nvim-treesitter/nvim-treesitter",
		dependencies = { "nvim-treesitter/nvim-treesitter-textobjects" },
		build = ":TSUpdate",

		highlight = {
			enable = false, -- false will disable the whole extension
			disable = { "html" }, -- list of language that will be disabled
		},

		config = function()
			-- [[ Configure Treesitter ]] See `:help nvim-treesitter`

			---@diagnostic disable-next-line: missing-fields
			require("nvim-treesitter.configs").setup({
				ensure_installed = { "bash", "c", "lua", "markdown", "vim", "vimdoc" },
				-- Autoinstall languages that are not installed
				auto_install = true,
				highlight = { enable = true },
				indent = { enable = true },
			})

			-- There are additional nvim-treesitter modules that you can use to interact
			-- with nvim-treesitter. You should go explore a few and see what interests you:
			--
			--    - Incremental selection: Included, see `:help nvim-treesitter-incremental-selection-mod`
			--    - Show your current context: https://github.com/nvim-treesitter/nvim-treesitter-context
			--    - Treesitter + textobjects: https://github.com/nvim-treesitter/nvim-treesitter-textobjects
		end,
	},

	--{
	--	"0x00-ketsu/autosave.nvim",
	--	-- lazy-loading on events
	--	event = { "InsertLeave", "TextChanged" },
	--	config = function()
	--		require("autosave").setup({
	--			-- your configuration comes here
	--			-- or leave it empty to use the default settings
	--			-- refer to the configuration section below
	--		})
	--	end,
	--},

	-- The following two comments only work if you have downloaded the kickstart repo, not just copy pasted the
	-- init.lua. If you want these files, they are in the repository, so you can just download them and
	-- put them in the right spots if you want.

	-- NOTE: Next step on your Neovim journey: Add/Configure additional plugins for kickstart
	--
	--  Here are some example plugins that I've included in the kickstart repository.
	--  Uncomment any of the lines below to enable them (you will need to restart nvim).
	--
	-- require 'kickstart.plugins.debug',
	-- require 'kickstart.plugins.indent_line',

	-- Lua
	{
		"folke/zen-mode.nvim",
		opts = {
			window = { width = 0.33, height = 1 },
		},
	},

	-- NOTE: The import below can automatically add your own plugins, configuration, etc from `lua/custom/plugins/*.lua`
	--    This is the easiest way to modularize your config.
	--
	--  Uncomment the following line and add your plugins to `lua/custom/plugins/*.lua` to get going.
	--    For additional information, see `:help lazy.nvim-lazy.nvim-structuring-your-plugins`
	{ import = "custom.plugins" },
})

-- import darkmage's custom keybinds
require("mappings")

-- disable copilot on startup
vim.cmd(":Copilot enable")

--require("zen-mode").toggle({})
--vim.cmd(":call llama#init()")