Shelly RGBW2 - change icon/function? #1492
Replies: 11 comments
-
|
Hi, are you using them as binary in/ouput? Currently not possible, though it would not be hard to implement: |
Beta Was this translation helpful? Give feedback.
-
|
Not sure what you mean with binary? yeah it would be great if this feature could be implemented just like you can choose garage door with the Shelly Plus 1 when flashing |
Beta Was this translation helpful? Give feedback.
-
Aah like on/off. Yes, I do. The valves I control |
Beta Was this translation helpful? Give feedback.
This comment has been minimized.
This comment has been minimized.
-
|
https://github.com/mongoose-os-apps/shelly-homekit/tree/rgbw2_switch I tried to build this quickly. |
Beta Was this translation helpful? Give feedback.
-
|
Hi
How do I update with this zip OTA ?
Usually I just use the URL.
Thanks!
… 9 juli 2024 kl. 10:21 skrev Markus Kirberg ***@***.***>:
https://github.com/mongoose-os-apps/shelly-homekit/tree/rgbw2_switch
I tried to build this quickly.
Please test:
release-ShellyRGBW2.zip <https://github.com/user-attachments/files/16140361/release-ShellyRGBW2.zip>
—
Reply to this email directly, view it on GitHub <#1411 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/A46H7KGSKUVPJGN23KTNB73ZLOMPPAVCNFSM6AAAAABKOVLVS6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDEMJWHEYTMNJUHA>.
You are receiving this because you authored the thread.
|
Beta Was this translation helpful? Give feedback.
-
|
Oh sorry the zip is within the zip |
Beta Was this translation helpful? Give feedback.
-
|
Yes. Tried the zip in the zip. Doesn’t work 10 juli 2024 kl. 19:28 skrev Markus Kirberg ***@***.***>:
Oh sorry the zip is within the zip
—Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you authored the thread.Message ID: ***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
|
I see. Indeed the firmware is now too big... I have to see where I can take cuts |
Beta Was this translation helpful? Give feedback.
-
|
Can you try this here? You have to set it to "Normal mode" |
Beta Was this translation helpful? Give feedback.
-
Hi
I use RGBW2 for irrigation. each channel controls its own valve. is it possible to change the icon or function so HomeKit understands that it is irrigation? Thanks!
Beta Was this translation helpful? Give feedback.
All reactions