Shelly RGBW PM Dual Input Dimming?

[mnm736]

I've ton a bunch of tests and research and I believe this feature is not currently available - but wanted to ask just in case I am doing something wrong. I can't seem to get it to work under RGB mode (I am using 1 color LED strip, but this also wont under the stock firmware under that mode, you must use RGB mode I've gathered). If this is something that could be added in that would be amazing.

I want to link the RGBW PM to HomeKit, but the homebridge plugin does not support it at all, My plan was to flash this firmware onto it but without this feature it wont work in my setup:

I have a one of these wired to I1 and I2, with up (I1) being on/increase brightness, and down (I2) being off/decrease brightness. this works with the below setup on the stock firmware:

Let me know what you think
thank you!

[markirb]

Hi,

yes currently we have no dimming control via buttons, not via one and also not via two.

Of course we can take that as an idea, but currently not planned

[mnm736]

ok thank you for confirming!

…

On Mon, Feb 10, 2025 at 1:58 PM Markus Kirberg ***@***.***> wrote: Hi, yes currently we have no dimming control via buttons, not via one and also not via two. Of course we can take that as an idea, but currently not planned — Reply to this email directly, view it on GitHub <#1623 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/BPKNWIO3PGCNBLNINZBUSSL2PDZFPAVCNFSM6AAAAABWZG6Q5GVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDMNBYHE2TSNZYG4> . You are receiving this because you authored the thread.Message ID: ***@***.***>