En español click acá -> Readme 🇪🇸

Printing labels with b-PAC 🖨

This is an example of how to print a label with a QR Code with b-PAC.

Requeriments

Before you begin, ensure you have met the following requirements:

You have installed the latest version of b-PAC Client Component Only.
❗ Note: Choose the version that corresponds to your Operating System (x86 - x64).
You have installed the latest version of P-touch Editor.
You need to install Brother b-PAC Extension. This extension allows you to control Brother label and mobile printers from Chrome using b-PAC.
You have installed the latest version of the Printer Driver.

Replace the path MODEL_FILE with one of your preference. Keep in mind you need Admin access to that path.

 const MODEL_FILE = "C:\\Users\\user\\Desktop\\label.lbx";

After that, you can take label.lbx file from assets/label/label.lbx and copy to the previous path.

Beyond the code, there are some points to be taken into account regarding the printer itself.

Make sure the Editor Lite light on the printer is OFF by holding down the button for a few seconds.
Check the size and type of the paper, either in P-Touch editor and printer settings. Both have to match.

To develop this example I read and copy-pasted some code from:

http://download.brother.com/pub/com/dev/pdf/bpac_webapplication_eng.pdf
https://stackoverflow.com/questions/59363053/adding-a-script-as-module-in-wordpress-admin-area

If you want to contact me you can reach me at mpablo182@gmail.com.