Anyone figured out how to display a WebRTC stream on the dashboard of Home Assistant?

[bobloadmire]

Love that the new update enables WebRTC streaming, but I don't know how to get the generic camera card to display the stream. It seems to be geared toward RTSP.

[tbrausch]

I have the same question. I can display the stream in Home Assistant using rtsp://192.168.1.119:8554/spare to create the generic camera, but the stream rtsp://192.168.1.119:8889/spare is not recognized. When running as a HA Addon, do we need to somehow define port 8889 or is this enabled by default (the documentation mentions that nothing special is required in Home Assistant Mode, which I assume means running as an Addon). Also, do we need to configure the RTSPtoWebRTC integration in HA?

[bobloadmire]

rtsp works fine for me, but i'm trying to use WebRTC.

…

On Wed, Jan 11, 2023 at 1:56 PM tbrausch ***@***.***> wrote: I have the same question. I can display the stream in Home Assistant using rtsp://192.168.1.119:8554/spare to create the generic camera, but the stream rtsp://192.168.1.119:8889/spare is not recognized. When running as a HA Addon, do we need to somehow define port 8889 or is this enabled by default (the documentation mentions that nothing special is required in Home Assistant Mode, which I assume meand running as an Addon). — Reply to this email directly, view it on GitHub <#666 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/ABAK3FBYULR3WKYCZ2EEKWTWR4T7ZANCNFSM6AAAAAATYPZSCU> . You are receiving this because you authored the thread.Message ID: ***@***.*** com>

-- - Brad Stewart

[tbrausch]

I added the following in my config

WB_IP: 192.168.1.119

and now I see the WebRTC option in the Web UI, but when clicking it I get the error

192.168.1.119 refused to connect

But I still do not see port 8889 in the Network Config

[mrlt8]

hmm, seems like it only did a partial upgrade to v1.11.0? Any chance you could reinstall the add-on to see if that gets the WebRTC ports to show up?

[tbrausch]

Thank you! Reinstalling did the trick - also had to manually add the WB_IP parameter via YAML. Displaying the camera with the Web UI in WebRTC mode or directly in the browser with

http://192.168.1.119:8889/spare/

now works perfectly. However I still cannot get a generic camera defined and working with WebRTC correctly. Is this even something that is supported? If so, what should I use as a stream source? rtsp://192.168.1.119:8555/spare works but has a slight delay, similar to MSE. rtsp://192.168.1.119:8889/spare as well as http://192.168.1.119:8889/spare/ fails to create the camera.

Update: Thank you so much for your help here, but it appears I am trying to do something that is not really supported in Wyze Bridge.

[mrlt8]

hmm will have to look into why WB_IP isn't getting set correctly (it should be getting the IP from supervisor/network/info on startup).

Do you know if any of the cards actively support WebRTC as a source?

[danielbublil]

Thank you! Reinstalling did the trick - also had to manually add the WB_IP parameter via YAML. Displaying the camera with the Web UI in WebRTC mode or directly in the browser with

http://192.168.1.119:8889/spare/

now works perfectly. However I still cannot get a generic camera defined and working with WebRTC correctly. Is this even something that is supported? If so, what should I use as a stream source? rtsp://192.168.1.119:8555/spare works but has a slight delay, similar to MSE. rtsp://192.168.1.119:8889/spare as well as http://192.168.1.119:8889/spare/ fails to create the camera.

Update: Thank you so much for your help here, but it appears I am trying to do something that is not really supported in Wyze Bridge.

where i need to set the WB_IP var?
i dont have in the addon configuration as @mrlt8 posted

found where to add it.
webrtc not working, all stream are choppy
2023/01/12 23:21:07 [WyzeBridge] 172.30.32.2 - - [12/Jan/2023 23:21:07] "GET /snapshot/cam1.jpg?1673558463600= HTTP/1.1" 200 -
Traceback (most recent call last):
File "/app/rtsp_event.py", line 5, in
import signal
File "/usr/local/lib/python3.10/signal.py", line 7, in
_IntEnum.convert(
File "/usr/local/lib/python3.10/enum.py", line 563, in convert
cls = cls(name, members, module=module)
File "/usr/local/lib/python3.10/enum.py", line 387, in call
return cls.create(
File "/usr/local/lib/python3.10/enum.py", line 518, in create
enum_class = metacls.new(metacls, class_name, bases, classdict)
File "/usr/local/lib/python3.10/enum.py", line 302, in new
if canonical_member.value == enum_member.value:
KeyboardInterrupt

[bobloadmire]

hmm, i'm forwarding through cloudflare and using HTTPS fine, so my setup is a bit different than yours.

…

On Wed, Jan 11, 2023 at 2:30 PM tbrausch ***@***.***> wrote: I think what I said is that I am having the same issue, but I'm not sure if there is some additional setup required. I also cannot display a WebRTC stream directly in a browser using http://192.168.1.119:8889/spare/ - this simply reports the error This site can’t be reached 192.168.1.119 refused to connect. which I am assuming means that port 8889 is not being defined correctly — Reply to this email directly, view it on GitHub <#666 (reply in thread)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/ABAK3FF6YDJ6JN5YCNMJEGLWR4X77ANCNFSM6AAAAAATYPZSCU> . You are receiving this because you authored the thread.Message ID: ***@***.*** com>

-- - Brad Stewart

[mrlt8]

You'd probably need to use something like ws://homeassistant.local:8899/cam-name/ws?

[bobloadmire]

I can view the cams fine with clourflaredurl.com/nameofcam

I want to have the HA dashboard generic camera card show the WebRTC stream since it seems to be a bit snappier than the RTSP stream.

[bobloadmire]

No I mean the dashboard. I want a tab on the dashboard that has the webrtc streams. I guess I can use the web page card

…

On Wed, Jan 11, 2023, 5:08 PM tbrausch ***@***.***> wrote: I'm not sure what you mean be accessing the WebRTC stream from the button on the WebUI. There are only 3 buttons for the camera on the WebUI - HLS, RTMP, and RTSP (see below). Also, as I stated above, trying to access the stream directly from http://homeassistant.local:8889/spare/ results in the error This site can’t be reached 192.168.1.119 refused to connect. I'm sure I am missing something obvious, but cannot figure out what it is. Just to reiterate, I am running Wyze Bridge from HA as an addon. [image: spare] <https://user-images.githubusercontent.com/45288916/211951324-ba19f31a-caf3-4b37-9f64-3c4228fb14d1.jpg> — Reply to this email directly, view it on GitHub <#666 (reply in thread)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/ABAK3FBP3ZJEKU7VQ6Q25CDWR5KSBANCNFSM6AAAAAATYPZSCU> . You are receiving this because you authored the thread.Message ID: ***@***.*** com>

[mrlt8]

Does the dashboard support WebRTC as a source? I looked into it in the past, but could never figure it out. Seems like it can do rtsp-to-WebRTC, but not WebRTC-to-WebRTC?