Skip to content

Latest commit

 

History

History
347 lines (265 loc) · 18.5 KB

security.md

File metadata and controls

347 lines (265 loc) · 18.5 KB
Raw

Mullvad VPN app security

This document describes the security properties of the Mullvad VPN app. It describes it for all platforms and their differences. Individual platforms might have slightly different properties and allow or block network traffic a bit differently, but all such deviations are described here.

This document does not describe in detail how we reach and uphold these properties, just what they are. See the architecture document for details on how the firewall integration is implemented.

For known security and privacy issues, that might cause the app to not uphold the properties described in this document under certain conditions, please see the known issues document.

The main purpose of the app is to allow the user to make all network/internet traffic to and from the device travel via an encrypted VPN tunnel.

Desktop vs mobile

For desktop operating systems, the security is ensured via tight integration with the default system firewall. This means WFP on Windows, PF on macOS and nftables on Linux. All changes to the rules are applied as atomic transactions. This means that there is no time window of inconsistent or invalid rules during changes.

On mobile, Android and iOS, it is not possible for apps to directly access and manipulate the firewall, routing table or DNS settings. There we employ other techniques to keep the system as secure as possible with the limitations of the OS APIs.

Android

⚠️ When we say all traffic in this chapter it does not include traffic exempt by the system or traffic affected by known issues.

The only way an android app can filter network traffic is via the VPN Service API. This API allows all traffic to and from the device to be routed through a third party app. This API is what the Mullvad VPN app uses for the tunnel itself and for leak protection.

When establishing a VPN connection using the default settings* the app will set the routes 0/0 and ::0/0 in order to force all traffic to be routed through the app. This also applies when the app is in a state where it blocks all traffic, such as the connecting, disconnecting and error states. Additionally the android system has a setting called Block connections without VPN that enables the Android OS to block all traffic that is not routed through the Mullvad VPN.

Besides the known issues, Android has many variants and flavors that may introduce variances to the default Android Open Source Project behavior. This means that the Mullvad VPN app, like all other VPN apps, is subject to the limitations of the VPN Service API.

*: Local Network Sharing affects the routes and Split Tunneling will allow apps to bypass the tunnel.

Exempt traffic

Even though not being properly documented by Google, some traffic is exempt by the system from using the VPN, which means that the traffic will leak and therefore potentially impact user privacy. This applies even if Block connections without VPN is enabled. The exempt traffic includes:

  • Connectivity checks (DNS lookups and HTTP(S) connections)
  • Network provided time (NTP)
  • Traffic to and from hotspot clients.

The following issues have been reported by Mullvad in the Android issue tracker in order to improve documentation and user privacy:

iOS

On iOS a designated packet tunnel process handles the network packet flow. iOS implementation delegates the traffic handling to wireguard-go, which works directly with the tun interface. The network configuration set up by the packet tunnel extension specifies the routing rules that all traffic should flow through the tunnel, the same way it works on Android.

App states

At the core of the app is a state machine called the "tunnel state machine". The following sub-sections will describe each state and what security properties hold and what network activity will be blocked and allowed in each state.

Except what is described as allowed in this document, all network packets should be blocked.

The following network traffic is allowed or blocked independent of state:

  1. All traffic on loopback adapters is always allowed.

  2. DHCPv4 and DHCPv6 requests are always allowed to go out and responses to come in:

    • Outgoing UDP from *:68 to 255.255.255.255:67 (client to server)
    • Incoming UDP *:67 to *:68 (server to client)
    • Outgoing UDP from [fe80::]/10:546 to [ff02::1:2]:547 and [ff05::1:3]:547 (client to server)
    • Incoming UDP from [fe80::]/10:547 to [fe80::]/10:546 (server to client)

  3. A subset of NDP is allowed:

    • Outgoing to ff02::2, but only ICMPv6 with type 133 and code 0 (Router solicitation)
    • Incoming from fe80::/10, but only ICMPv6 type 134 and code 0 (Router advertisement)
    • Incoming from fe80::/10, but only ICMPv6 type 137 and code 0 (Redirect)
    • Outgoing to ff02::1:ff00:0/104 and fe80::/10, but only ICMPv6 with type 135 and code 0 (Neighbor solicitation).
    • Incoming from fe80::/10, but only ICMPv6 with type 135 and code 0 (Neighbor solicitation).
    • Outgoing to fe80::/10, but only ICMPv6 with type 136 and code 0 (Neighbor advertisement).
    • Incoming from *, but only ICMPv6 with type 136 and code 0 (Neighbor advertisement).

  4. If the "Allow LAN" setting is enabled, the following is also allowed:

    • Outgoing to, and incoming from, any IP in an unroutable network, that means:
      • 10.0.0.0/8
      • 172.16.0.0/12
      • 192.168.0.0/16
      • 169.254.0.0/16 (Link-local IPv4 range)
      • fe80::/10 (Link-local IPv6 range)
      • fc00::/7 (Unique local address (ULA) range)
    • Outgoing to any IP in globally unroutable multicast networks, meaning these:
      • 224.0.0.0/24 (Local subnet IPv4 multicast)
      • 239.0.0.0/8 (Administratively scoped IPv4 multicast. E.g. SSDP and mDNS)
      • 255.255.255.255/32 (Broadcasts to the local network)
      • ff01::/16 (Interface-local multicast. Local to a single interface on a node.)
      • ff02::/16 (Link-local IPv6 multicast. IPv6 equivalent of 224.0.0.0/24)
      • ff03::/16 (Realm-local IPv6 multicast)
      • ff04::/16 (Admin-local IPv6 multicast)
      • ff05::/16 (Site-local IPv6 multicast)
    • Incoming DHCPv4 requests and outgoing responses (be a DHCPv4 server):
      • Incoming UDP from *:68 to 255.255.255.255:67
      • Outgoing UDP from *:67 to *:68

Packet forwarding

On Linux, any situation that permits incoming or outgoing traffic also allows that traffic to be forwarded. All other forward traffic is rejected.

Mullvad API

The firewall allows traffic to the API regardless of tunnel state, so the daemon is able to update keys, fetch account data, etc. In the Connected state, API traffic is only allowed inside the tunnel. For the other states, API traffic will bypass the firewall. On Windows, only the Mullvad service and problem report tool are able to communicate with the API in any of the blocking states. On macOS and Linux all applications running as root are able to reach the API in blocking states.

Disconnected

This is the default state that the mullvad-daemon starts in when the device boots, unless "Launch app on start-up" and "Auto-connect" are both active. Then the app will proceed to the connecting state immediately.

The disconnected state behaves very differently depending on the value of the "always require VPN" setting. If this setting is enabled, the disconnected state behaves like and has the same security properties as, the error state. If the setting is disabled (the default), then it is the only state where the app does not enforce any firewall rules. It then behaves the same as if the mullvad-daemon was not even running. It lets network traffic flow in and out of the computer freely.

The disconnected state is not active while the app changes server or if the VPN tunnel goes down unexpectedly. See the connecting state and kill switch documentation for these unexpected network issues. The only time this state is active is initially when the daemon starts and later when the user explicitly clicks the disconnect/cancel button to intentionally disable the VPN.

Connecting

This state is active from when the app decides to create a VPN tunnel, until said tunnel has been established and verified to work. Then it transitions to the connected state.

In this state, network traffic to the IP+port+protocol combination used for the first hop of the VPN tunnel is allowed on all interfaces, together with responses to this outgoing traffic. First hop means the bridge server if one is used, otherwise the VPN server directly. This IP+port+protocol combination should only be allowed for the process establishing the VPN tunnel, or only administrator level processes, depending on what the platform firewall allows restricting. On Windows the rule only allows processes from binaries in certain paths. macOS the rule only allows packets from processes running as root. On Linux, the rule only allows packets that have the mark 0x6d6f6c65 set: setting a firewall mark on traffic requires elevated privileges when using tunnels that support marking traffic, otherwise the rule is the same as on macOS: the packet needs to originate from a process running as root. This process/user check is important to not allow unprivileged programs to leak packets to this IP outside the tunnel, as those packets can be fingerprinted.

Examples:

  1. No bridge is used and the tunnel protocol is OpenVPN trying to connect with UDP to a VPN server at IP a.b.c.d port 1301 - Allow traffic to a.b.c.d:1301/UDP for openvpn.exe or any process running as root, and incoming matching traffic.
  2. Connecting to the same VPN server, but via a bridge. The bridge is at IP e.f.g.h and the proxy service listens on TCP port 443 - Allow traffic to e.f.g.h:443/TCP for mullvad-daemon.exe or any process running as root, and incoming matching traffic. Do not allow any direct communication with the VPN server.
  3. Connecting to a.b.c.d port 1234 using WireGuard: Allow a.b.c.d:1234/UDP for mullvad-daemon.exe or any process running as root.

When using WireGuard, traffic inside the tunnel is permitted immediately after the tunnel device has been created. See the connected state for details on this.

Connected

This state becomes active when connecting has fully established a VPN tunnel. It stays active until the user requests a disconnect, quit, server change, change of other setting that affects the tunnel or until the tunnel goes down unexpectedly.

In this state, all traffic in both directions over the tunnel interface is allowed. Minus DNS requests (TCP and UDP destination port 53) not to a gateway IP on the tunnel interface or one of the defined custom DNS servers. We can only request DNS inside the tunnel and only from the relay server itself, unless one or more custom DNS servers are provided. If custom servers are specified, DNS requests can only be made to them.

This state allows traffic on all interfaces to and from the IP+port+protocol combination that the tunnel runs over. See the connecting state for details on this rule.

Disconnecting

This state becomes active if there is a VPN tunnel active but the app decides to close said tunnel. This state is active until the tunnel has been properly closed.

This state does not apply its own security policy on the firewall. It just keeps what was already active. All states transitioning into this state, and all states this state later transitions to, have their own security policies. This state is just a short transition between those, while the app waits for a running tunnel to come down and clean up after itself.

Error

This state is only active when there is a problem/error. As described in other sections, the app will never unlock the firewall and allow network traffic outside the tunnel unless a disconnect/quit is explicitly requested by the user. At the same time there might be situations when the app can't establish a tunnel for the device. This includes, but is not limited to:

  • Account runs out of time
  • The computer is offline
  • Some internal error parsing or modifying system routing table, DNS settings etc.

In the above cases the app gives up trying to create a tunnel, but it can't go to the disconnected state, since it should not unlock the firewall. Then it enters this state. This state locks the firewall so no traffic can flow (except the always active exceptions) and informs the user what the problem is. The user must then explicitly click disconnect in order to unlock the firewall and get access to the internet again.

If the firewall integration fails, so this state fails to block traffic. Then it is not much left the app can do to prevent leaks. It then informs the user of the seriousness of the situation.

Kill switch

The app has an always on "kill switch" that can't be disabled. There is no setting for it. This means that whenever the app changes server or temporarily loses tunnel connectivity it will ensure no network traffic leaks out unencrypted.

The app avoids the term "kill switch". Because it sounds like a red button that has to be engaged when a problem arises. This app is much more proactive and applies strict firewall rules directly when it leaves the disconnected state and keeps those rules active and enforced until the app comes back to the disconnected state via an explicit user request again. Said strict firewall rules ensure that packets can only leave or enter the computer in a few predefined ways, most notably to the selected VPN server of course. Changes to the firewall are done in atomic transactions. Meaning there is no time window where no or invalid rules are active on the device.

If the tunnel were to come down and your operating system tries to route packets out via the normal network rather than through the VPN, these rules would block them from leaving. So rather than failing open, meaning if the tunnel fails your traffic leaves in other ways, we fail closed, meaning if the packets don't leave encrypted in the way the app intends, then they can't leave at all.

Essentially, one can say that the app's "kill switch" is the fact that the connecting, disconnecting and error states prevent leaks via firewall rules.

Always require VPN

The "always require VPN" setting in the app is regularly misunderstood as the kill switch. This is not the case. The "always require VPN" setting only changes whether or not the disconnected state should allow traffic to flow freely or to block it. The disconnected state is not active during intermittent network issues or server changes, when a kill switch would normally be operating.

The intended use case for this setting is when the user want to only switch between no internet connectivity at all and using VPN. With this setting active, the device can never communicate with the internet outside of a VPN tunnel.

DNS

DNS is treated a bit differently from other protocols. Since a user's DNS history can give a detailed view of what they are doing, it is important to not leak it. Since an invalid or missing DNS response prevents the user from going where they want to go, it is important that it works and gives correct replies, from an anti-censorship point of view. Poisoned DNS replies is a very common way of censoring the network in many places.

By default, the app makes sure that every DNS request from the device goes inside the VPN tunnel and only to the VPN relay server that the device is currently connected to. If custom DNS servers are provided, requests are always made inside the tunnel unless the address belongs to a private address range (such as 192.168.0.0/16) or a loopback address.

The above holds during the connected state. In the disconnected state the app does nothing with DNS, meaning the default one is used, probably from the ISP. In the other states DNS is simply blocked.

Desktop system service

On all desktop platforms the VPN tunnel and the device security is handled by a system service called mullvad-daemon. This service is installed as the administrator/root user during app install and is then always running in the background, even when the user quits the GUI and when no tunnels are running.

This system service can be controlled via a management interface, exposed locally via unix domain sockets (UDS) on Linux and macOS and via named pipes on Windows. This management interface can be reached by any process running on the device. Locally running malicious programs are outside of the app's threat model.

The mullvad-daemon transition to the disconnected state before exiting. To limit leaks during computer shutdown, it will maintain the blocking firewall rules upon exit in the following scenarios:

  • Always require VPN is enabled
  • A user didn't explicitly request for the mullvad-daemon to be shut down and either or both of the following are true

In other cases, when the daemon process stops normally, firewall rules will be removed.

Windows

On Windows, persistent firewall filters may be added when the service exits, in case the service decides to continue to enforce a blocking policy. These filters block any traffic occurring before the service has started back up again during boot, including before the BFE service has started.

As with "Always require VPN", enabling "Auto-connect" in the service will cause it to enforce the blocking policy before being stopped.

Linux

Due to the dependence on various other services, the mullvad-daemon is not started early enough to prevent leaks. To prevent this, another system unit is started during early boot that applies a blocking policy that persists until the mullvad-daemon is started.

Desktop Electron GUI

The graphical frontend for the app on desktop is an Electron app. This app only ever loads local resources in the form of html, CSS and Javascript directly from the installation directory of the app, and never from remote sources.

The GUI only communicates with the system service (mullvad-daemon), it makes no other network connections. Except when the user sends a problem report, then it spawn the mullvad-problem-report tool, which in turn communicate over TLS with our API.