guided.py

import json
import logging
import os
import time

import archinstall
from archinstall.lib.hardware import has_uefi
from archinstall.lib.networking import check_mirror_reachable
from archinstall.lib.profiles import Profile

if archinstall.arguments.get('help'):
	print("See `man archinstall` for help.")
	exit(0)

# For support reasons, we'll log the disk layout pre installation to match against post-installation layout
archinstall.log(f"Disk states before installing: {archinstall.disk_layouts()}", level=logging.DEBUG)


def ask_user_questions():
	"""
		First, we'll ask the user for a bunch of user input.
		Not until we're satisfied with what we want to install
		will we continue with the actual installation steps.
	"""
	if not archinstall.arguments.get('keyboard-language', None):
		while True:
			try:
				archinstall.arguments['keyboard-language'] = archinstall.select_language(archinstall.list_keyboard_languages()).strip()
				break
			except archinstall.RequirementError as err:
				archinstall.log(err, fg="red")

	# Before continuing, set the preferred keyboard layout/language in the current terminal.
	# This will just help the user with the next following questions.
	if len(archinstall.arguments['keyboard-language']):
		archinstall.set_keyboard_language(archinstall.arguments['keyboard-language'])

	# Set which region to download packages from during the installation
	if not archinstall.arguments.get('mirror-region', None):
		while True:
			try:
				archinstall.arguments['mirror-region'] = archinstall.select_mirror_regions(archinstall.list_mirrors())
				break
			except archinstall.RequirementError as e:
				archinstall.log(e, fg="red")
	else:
		selected_region = archinstall.arguments['mirror-region']
		archinstall.arguments['mirror-region'] = {selected_region: archinstall.list_mirrors()[selected_region]}

	# Ask which harddrive/block-device we will install to
	if archinstall.arguments.get('harddrive', None):
		archinstall.arguments['harddrive'] = archinstall.BlockDevice(archinstall.arguments['harddrive'])
	else:
		archinstall.arguments['harddrive'] = archinstall.select_disk(archinstall.all_disks())
		if archinstall.arguments['harddrive'] is None:
			archinstall.arguments['target-mount'] = archinstall.storage.get('MOUNT_POINT', '/mnt')

	# Perform a quick sanity check on the selected harddrive.
	# 1. Check if it has partitions
	# 3. Check that we support the current partitions
	# 2. If so, ask if we should keep them or wipe everything
	if archinstall.arguments['harddrive'] and archinstall.arguments['harddrive'].has_partitions():
		archinstall.log(f"{archinstall.arguments['harddrive']} contains the following partitions:", fg='yellow')

		# We curate a list pf supported partitions
		# and print those that we don't support.
		partition_mountpoints = {}
		for partition in archinstall.arguments['harddrive']:
			try:
				if partition.filesystem_supported():
					archinstall.log(f" {partition}")
					partition_mountpoints[partition] = None
			except archinstall.UnknownFilesystemFormat as err:
				archinstall.log(f" {partition} (Filesystem not supported)", fg='red')

		# We then ask what to do with the partitions.
		if (option := archinstall.ask_for_disk_layout()) == 'abort':
			archinstall.log("Safely aborting the installation. No changes to the disk or system has been made.")
			exit(1)
		elif option == 'keep-existing':
			archinstall.arguments['harddrive'].keep_partitions = True

			archinstall.log(" ** You will now select which partitions to use by selecting mount points (inside the installation). **")
			archinstall.log(" ** The root would be a simple / and the boot partition /boot (as all paths are relative inside the installation). **")
			mountpoints_set = []
			while True:
				# Select a partition
				# If we provide keys as options, it's better to convert them to list and sort before passing
				mountpoints_list = sorted(list(partition_mountpoints.keys()))
				partition = archinstall.generic_select(mountpoints_list, "Select a partition by number that you want to set a mount-point for (leave blank when done): ")
				if not partition:
					if set(mountpoints_set) & {'/', '/boot'} == {'/', '/boot'}:
						break

					continue

				# Select a mount-point
				mountpoint = input(f"Enter a mount-point for {partition}: ").strip(' ')
				if len(mountpoint):

					# Get a valid & supported filesystem for the partition:
					while 1:
						new_filesystem = input(f"Enter a valid filesystem for {partition} (leave blank for {partition.filesystem}): ").strip(' ')
						if len(new_filesystem) <= 0:
							if partition.encrypted and partition.filesystem == 'crypto_LUKS':
								old_password = archinstall.arguments.get('!encryption-password', None)
								if not old_password:
									old_password = input(f'Enter the old encryption password for {partition}: ')

								if autodetected_filesystem := partition.detect_inner_filesystem(old_password):
									new_filesystem = autodetected_filesystem
								else:
									archinstall.log("Could not auto-detect the filesystem inside the encrypted volume.", fg='red')
									archinstall.log("A filesystem must be defined for the unlocked encrypted partition.")
									continue
							break

						# Since the potentially new filesystem is new
						# we have to check if we support it. We can do this by formatting /dev/null with the partitions filesystem.
						# There's a nice wrapper for this on the partition object itself that supports a path-override during .format()
						try:
							partition.format(new_filesystem, path='/dev/null', log_formatting=False, allow_formatting=True)
						except archinstall.UnknownFilesystemFormat:
							archinstall.log(f"Selected filesystem is not supported yet. If you want archinstall to support '{new_filesystem}',")
							archinstall.log("please create a issue-ticket suggesting it on github at https://github.com/archlinux/archinstall/issues.")
							archinstall.log("Until then, please enter another supported filesystem.")
							continue
						except archinstall.SysCallError:
							pass  # Expected exception since mkfs.<format> can not format /dev/null. But that means our .format() function supported it.
						break

					# When we've selected all three criteria,
					# We can safely mark the partition for formatting and where to mount it.
					# TODO: allow_formatting might be redundant since target_mountpoint should only be
					#       set if we actually want to format it anyway.
					mountpoints_set.append(mountpoint)
					partition.allow_formatting = True
					partition.target_mountpoint = mountpoint
					# Only overwrite the filesystem definition if we selected one:
					if len(new_filesystem):
						partition.filesystem = new_filesystem

			archinstall.log('Using existing partition table reported above.')
		elif option == 'format-all':
			if not archinstall.arguments.get('filesystem', None):
				archinstall.arguments['filesystem'] = archinstall.ask_for_main_filesystem_format()
			archinstall.arguments['harddrive'].keep_partitions = False
	elif archinstall.arguments['harddrive']:
		# If the drive doesn't have any partitions, safely mark the disk with keep_partitions = False
		# and ask the user for a root filesystem.
		if not archinstall.arguments.get('filesystem', None):
			archinstall.arguments['filesystem'] = archinstall.ask_for_main_filesystem_format()
		archinstall.arguments['harddrive'].keep_partitions = False

	# Get disk encryption password (or skip if blank)
	if archinstall.arguments['harddrive'] and archinstall.arguments.get('!encryption-password', None) is None:
		if passwd := archinstall.get_password(prompt='Enter disk encryption password (leave blank for no encryption): '):
			archinstall.arguments['!encryption-password'] = passwd
			archinstall.arguments['harddrive'].encryption_password = archinstall.arguments['!encryption-password']
	archinstall.arguments["bootloader"] = archinstall.ask_for_bootloader()
	# Get the hostname for the machine
	if not archinstall.arguments.get('hostname', None):
		archinstall.arguments['hostname'] = input('Desired hostname for the installation: ').strip(' ')

	# Ask for a root password (optional, but triggers requirement for super-user if skipped)
	if not archinstall.arguments.get('!root-password', None):
		archinstall.arguments['!root-password'] = archinstall.get_password(prompt='Enter root password (Recommendation: leave blank to leave root disabled): ')

	# Ask for additional users (super-user if root pw was not set)
	archinstall.arguments['users'] = {}
	archinstall.arguments['superusers'] = {}
	if not archinstall.arguments.get('!root-password', None):
		archinstall.arguments['superusers'] = archinstall.ask_for_superuser_account('Create a required super-user with sudo privileges: ', forced=True)

	users, superusers = archinstall.ask_for_additional_users('Enter a username to create a additional user (leave blank to skip & continue): ')
	archinstall.arguments['users'] = users
	archinstall.arguments['superusers'] = {**archinstall.arguments['superusers'], **superusers}

	# Ask for archinstall-specific profiles (such as desktop environments etc)
	if not archinstall.arguments.get('profile', None):
		archinstall.arguments['profile'] = archinstall.select_profile(archinstall.list_profiles(filter_top_level_profiles=True))

	# Check the potentially selected profiles preparations to get early checks if some additional questions are needed.
	if archinstall.arguments['profile'] and archinstall.arguments['profile'].has_prep_function():
		with archinstall.arguments['profile'].load_instructions(namespace=f"{archinstall.arguments['profile'].namespace}.py") as imported:
			if not imported._prep_function():
				archinstall.log(
					' * Profile\'s preparation requirements was not fulfilled.',
					fg='red'
				)
				exit(1)

	# Ask about audio server selection if one is not already set
	if not archinstall.arguments.get('audio', None):
		# only ask for audio server selection on a desktop profile
		if str(archinstall.arguments['profile']) == 'Profile(desktop)':
			archinstall.arguments['audio'] = archinstall.ask_for_audio_selection()
		else:
			# packages installed by a profile may depend on audio and something may get installed anyways, not much we can do about that.
			# we will not try to remove packages post-installation to not have audio, as that may cause multiple issues
			archinstall.arguments['audio'] = None

	# Ask for preferred kernel:
	if not archinstall.arguments.get("kernels", None):
		kernels = ["linux", "linux-lts", "linux-zen", "linux-hardened"]
		archinstall.arguments['kernels'] = archinstall.select_kernel(kernels)

	# Additional packages (with some light weight error handling for invalid package names)
	print("Only packages such as base, base-devel, linux, linux-firmware, efibootmgr and optional profile packages are installed.")
	print("If you desire a web browser, such as firefox or chromium, you may specify it in the following prompt.")
	while True:
		if not archinstall.arguments.get('packages', None):
			archinstall.arguments['packages'] = [package for package in input('Write additional packages to install (space separated, leave blank to skip): ').split(' ') if len(package)]

		if len(archinstall.arguments['packages']):
			# Verify packages that were given
			try:
				archinstall.log("Verifying that additional packages exist (this might take a few seconds)")
				archinstall.validate_package_list(archinstall.arguments['packages'])
				break
			except archinstall.RequirementError as e:
				archinstall.log(e, fg='red')
				archinstall.arguments['packages'] = None  # Clear the packages to trigger a new input question
		else:
			# no additional packages were selected, which we'll allow
			break

	# Ask or Call the helper function that asks the user to optionally configure a network.
	if not archinstall.arguments.get('nic', None):
		archinstall.arguments['nic'] = archinstall.ask_to_configure_network()
		if not archinstall.arguments['nic']:
			archinstall.log("No network configuration was selected. Network is going to be unavailable until configured manually!", fg="yellow")

	if not archinstall.arguments.get('timezone', None):
		archinstall.arguments['timezone'] = archinstall.ask_for_a_timezone()


def perform_installation_steps():
	print()
	print('This is your chosen configuration:')
	archinstall.log("-- Guided template chosen (with below config) --", level=logging.DEBUG)
	archinstall.log(json.dumps(archinstall.arguments, indent=4, sort_keys=True, cls=archinstall.JSON), level=logging.INFO)
	print()

	if not archinstall.arguments.get('silent'):
		input('Press Enter to continue.')

	"""
		Issue a final warning before we continue with something un-revertable.
		We mention the drive one last time, and count from 5 to 0.
	"""

	if archinstall.arguments.get('harddrive', None):
		print(f" ! Formatting {archinstall.arguments['harddrive']} in ", end='')
		archinstall.do_countdown()

		"""
			Setup the blockdevice, filesystem (and optionally encryption).
			Once that's done, we'll hand over to perform_installation()
		"""
		mode = archinstall.GPT
		if has_uefi() is False:
			mode = archinstall.MBR
		with archinstall.Filesystem(archinstall.arguments['harddrive'], mode) as fs:
			# Wipe the entire drive if the disk flag `keep_partitions`is False.
			if archinstall.arguments['harddrive'].keep_partitions is False:
				fs.use_entire_disk(root_filesystem_type=archinstall.arguments.get('filesystem', 'btrfs'))

			# Check if encryption is desired and mark the root partition as encrypted.
			if archinstall.arguments.get('!encryption-password', None):
				root_partition = fs.find_partition('/')
				root_partition.encrypted = True

			# After the disk is ready, iterate the partitions and check
			# which ones are safe to format, and format those.
			for partition in archinstall.arguments['harddrive']:
				if partition.safe_to_format():
					# Partition might be marked as encrypted due to the filesystem type crypt_LUKS
					# But we might have omitted the encryption password question to skip encryption.
					# In which case partition.encrypted will be true, but passwd will be false.
					if partition.encrypted and (passwd := archinstall.arguments.get('!encryption-password', None)):
						partition.encrypt(password=passwd)
					else:
						partition.format()
				else:
					archinstall.log(f"Did not format {partition} because .safe_to_format() returned False or .allow_formatting was False.", level=logging.DEBUG)

			if archinstall.arguments.get('!encryption-password', None):
				# First encrypt and unlock, then format the desired partition inside the encrypted part.
				# archinstall.luks2() encrypts the partition when entering the with context manager, and
				# unlocks the drive so that it can be used as a normal block-device within archinstall.
				with archinstall.luks2(fs.find_partition('/'), 'luksloop', archinstall.arguments.get('!encryption-password', None)) as unlocked_device:
					unlocked_device.format(fs.find_partition('/').filesystem)
					unlocked_device.mount(archinstall.storage.get('MOUNT_POINT', '/mnt'))
			else:
				fs.find_partition('/').mount(archinstall.storage.get('MOUNT_POINT', '/mnt'))

			if has_uefi():
				fs.find_partition('/boot').mount(archinstall.storage.get('MOUNT_POINT', '/mnt') + '/boot')

	perform_installation(archinstall.storage.get('MOUNT_POINT', '/mnt'))


def perform_installation(mountpoint):
	"""
	Performs the installation steps on a block device.
	Only requirement is that the block devices are
	formatted and setup prior to entering this function.
	"""
	with archinstall.Installer(mountpoint, kernels=archinstall.arguments.get('kernels', 'linux')) as installation:
		# if len(mirrors):
		# Certain services might be running that affects the system during installation.
		# Currently, only one such service is "reflector.service" which updates /etc/pacman.d/mirrorlist
		# We need to wait for it before we continue since we opted in to use a custom mirror/region.
		installation.log('Waiting for automatic mirror selection (reflector) to complete.', level=logging.INFO)
		while archinstall.service_state('reflector') not in ('dead', 'failed'):
			time.sleep(1)
		# Set mirrors used by pacstrap (outside of installation)
		if archinstall.arguments.get('mirror-region', None):
			archinstall.use_mirrors(archinstall.arguments['mirror-region'])  # Set the mirrors for the live medium
		if installation.minimal_installation():
			installation.set_hostname(archinstall.arguments['hostname'])
			if archinstall.arguments['mirror-region'].get("mirrors", None) is not None:
				installation.set_mirrors(archinstall.arguments['mirror-region'])  # Set the mirrors in the installation medium
			if archinstall.arguments["bootloader"] == "grub-install" and has_uefi():
				installation.add_additional_packages("grub")
			installation.add_bootloader(archinstall.arguments["bootloader"])

			# If user selected to copy the current ISO network configuration
			# Perform a copy of the config
			if archinstall.arguments.get('nic', {}) == 'Copy ISO network configuration to installation':
				installation.copy_iso_network_config(enable_services=True)  # Sources the ISO network configuration to the install medium.
			elif archinstall.arguments.get('nic', {}).get('NetworkManager', False):
				installation.add_additional_packages("networkmanager")
				installation.enable_service('NetworkManager.service')
			# Otherwise, if a interface was selected, configure that interface
			elif archinstall.arguments.get('nic', {}):
				installation.configure_nic(**archinstall.arguments.get('nic', {}))
				installation.enable_service('systemd-networkd')
				installation.enable_service('systemd-resolved')

			if archinstall.arguments.get('audio', None) is not None:
				installation.log(f"This audio server will be used: {archinstall.arguments.get('audio', None)}", level=logging.INFO)
				if archinstall.arguments.get('audio', None) == 'pipewire':
					print('Installing pipewire ...')

					installation.add_additional_packages(["pipewire", "pipewire-alsa", "pipewire-jack", "pipewire-media-session", "pipewire-pulse", "gst-plugin-pipewire", "libpulse"])
				elif archinstall.arguments.get('audio', None) == 'pulseaudio':
					print('Installing pulseaudio ...')
					installation.add_additional_packages("pulseaudio")
			else:
				installation.log("No audio server will be installed.", level=logging.INFO)

			if archinstall.arguments.get('packages', None) and archinstall.arguments.get('packages', None)[0] != '':
				installation.add_additional_packages(archinstall.arguments.get('packages', None))

			if archinstall.arguments.get('profile', None):
				installation.install_profile(archinstall.arguments.get('profile', None))

			for user, user_info in archinstall.arguments.get('users', {}).items():
				installation.user_create(user, user_info["!password"], sudo=False)

			for superuser, user_info in archinstall.arguments.get('superusers', {}).items():
				installation.user_create(superuser, user_info["!password"], sudo=True)

			if timezone := archinstall.arguments.get('timezone', None):
				installation.set_timezone(timezone)

			if (root_pw := archinstall.arguments.get('!root-password', None)) and len(root_pw):
				installation.user_set_pw('root', root_pw)

			# This step must be after profile installs to allow profiles to install language pre-requisits.
			# After which, this step will set the language both for console and x11 if x11 was installed for instance.
			installation.set_keyboard_language(archinstall.arguments['keyboard-language'])

			if archinstall.arguments['profile'] and archinstall.arguments['profile'].has_post_install():
				with archinstall.arguments['profile'].load_instructions(namespace=f"{archinstall.arguments['profile'].namespace}.py") as imported:
					if not imported._post_install():
						archinstall.log(' * Profile\'s post configuration requirements was not fulfilled.', fg='red')
						exit(1)

		installation.log("For post-installation tips, see https://wiki.archlinux.org/index.php/Installation_guide#Post-installation", fg="yellow")
		if not archinstall.arguments.get('silent'):
			choice = input("Would you like to chroot into the newly created installation and perform post-installation configuration? [Y/n] ")
			if choice.lower() in ("y", ""):
				try:
					installation.drop_to_shell()
				except:
					pass

	# For support reasons, we'll log the disk layout post installation (crash or no crash)
	archinstall.log(f"Disk states after installing: {archinstall.disk_layouts()}", level=logging.DEBUG)


if not check_mirror_reachable():
	log_file = os.path.join(archinstall.storage.get('LOG_PATH', None), archinstall.storage.get('LOG_FILE', None))
	archinstall.log(f"Arch Linux mirrors are not reachable. Please check your internet connection and the log file '{log_file}'.", level=logging.INFO, fg="red")
	exit(1)

if archinstall.arguments.get('silent', None) is None:
	ask_user_questions()
else:
	# Workarounds if config is loaded from a file
	# The harddrive section should be moved to perform_installation_steps, where it's actually being performed
	# Blockdevice object should be created in perform_installation_steps
	# This needs to be done until then
	archinstall.arguments['harddrive'] = archinstall.BlockDevice(path=archinstall.arguments['harddrive']['path'])
	# Temporarily disabling keep_partitions if config file is loaded
	archinstall.arguments['harddrive'].keep_partitions = False
	# Temporary workaround to make Desktop Environments work
	archinstall.arguments['profile'] = archinstall.Profile(None, archinstall.arguments.get('desktop', None))

perform_installation_steps()