infinitesp.yaml

substitutions:
  name: infinitesp
  btn_slop: '0.1'

esphome:
  name: $name
  board: esp32s3box
  platform: esp32
  libraries:
    - SPI
    - FS
    - SPIFFS
    - bodmer/TFT_eSPI@^2.5.21
  includes:
    - tftespi.h

  platformio_options:
    build_flags:
      - -Os
      - -DCORE_DEBUG_LEVEL=ARDUHAL_LOG_LEVEL_DEBUG
      - -DUSER_SETUP_LOADED=1
      - -DST7789_DRIVER=1
      - -DTFT_WIDTH=240
      - -DTFT_HEIGHT=320
      - -DTFT_RGB_ORDER=TFT_BGR
      - -DTFT_MOSI=6
      - -DTFT_SCLK=7
      - -DTFT_CS=5
      - -DTFT_DC=4
      - -DTFT_RST=48
      - -DTFT_BL=45
      - -DTFT_BACKLIGHT_ON=LOW
      - -DLOAD_GLCD=1
      - -DLOAD_FONT2=1
      - -DLOAD_FONT4=1
      - -DLOAD_FONT6=1
      - -DLOAD_FONT7=1
      - -DLOAD_FONT8=1
      - -DLOAD_GFXFF=1
      - -DSMOOTH_FONT=1
      - -DSPI_FREQUENCY=40000000


wifi:
  networks:
  - ssid: !secret ssid
    password: !secret pass
  ap:
    ssid: $name-ap

api:
ota:
logger:
  level: DEBUG
web_server:
  port: 80

switch:
  - platform: restart
    name: "$name reboot"

custom_component:
  - lambda: |-
      auto my_tftespi = new MyTFTeSPI();
      return {my_tftespi};
    components:
    - id: my_tftespi_id

time:
  - platform: homeassistant
    id: ha_time

#spi:
#  clk_pin: GPIO7
#  mosi_pin: GPIO6

#i2c:
#  scl: GPIO18
#  sda: GPIO8
#  scan: true

#dallas:
#  pin: GPIO14
#  update_interval: 6s

mqtt:
  broker: !secret mqtt
  id: mqtt_client

#meassistant/climate/primary/fan_mode "auto"
#homeassistant/climate/primary/hvac_action "idle"
#homeassistant/climate/primary/preset_mode "Override"
#homeassistant/climate/primary/current_activity "manual"
#homeassistant/climate/primary/scheduled_activity "home"
text_sensor:
  - platform: mqtt_subscribe
    topic: homeassistant/climate/primary/fan_mode
    id: mq_fan_mode_text
    name: "mqtt primary current fan mode"

  - platform: mqtt_subscribe
    topic: homeassistant/climate/primary/hvac_action
    id: mq_hvac_action_text
    name: "mqtt primary hvac action"

  - platform: mqtt_subscribe
    topic: homeassistant/climate/primary/preset_mode
    id: mq_preset_mode_text
    name: "mqtt primary preset mode"

  - platform: mqtt_subscribe
    topic: homeassistant/climate/primary/current_activity
    id: mq_current_activity_text
    name: "mqtt primary current activity"

  - platform: mqtt_subscribe
    topic: homeassistant/climate/primary/scheduled_activity
    id: mq_scheduled_activity_text
    name: "mqtt primary scheduled activity"

sensor:
  - platform: homeassistant
    name: "cloned HA thermostat setpoint"
    id: climate_clone_setpoint
    entity_id: climate.primary
    attribute: temperature
  - platform: homeassistant
    name: "cloned HA thermostat temperature"
    id: climate_clone_current_temperature
    entity_id: climate.primary
    attribute: current_temperature

  - platform: wifi_signal
    name: "$name WiFi Signal"
    update_interval: 300s
    accuracy_decimals: 0

#  - platform: dallas
#    index: 0
#    name: "$name temperature"
#    id: ds18b20
#    #address: 0x873ce1e381b49828

  - platform: adc
    id: btns_val
    pin: GPIO1
    name: "$name front buttons"
    update_interval: 50ms
    attenuation: auto
    filters:
      - delta: 0.1

  - platform: mqtt_subscribe
    topic: homeassistant/climate/primary/temperature
    id: mq_temperature_num
    name: "mqtt primary temperature num"
  - platform: mqtt_subscribe
    topic: homeassistant/climate/primary/current_temperature
    id: mq_current_temperature_num
    name: "mqtt primary current humidity num"
  - platform: mqtt_subscribe
    topic: homeassistant/climate/primary/current_humidity
    id: mq_current_humidity
    name: "mqtt primary current humidity num"

binary_sensor:
  - platform: template
    name: "$name left"
    id: btn_left
    lambda: 'return (2.41+$btn_slop > id(btns_val).state && 2.41-$btn_slop < id(btns_val).state);'
#    on_release:
#      - then:
#          - display.page.show_previous: my_display
#          - component.update: my_display
  - platform: template
    name: "$name center"
    id: btn_center
    lambda: 'return (1.99+$btn_slop > id(btns_val).state && 1.99-$btn_slop < id(btns_val).state);'
    on_state:
      - then:
          - lambda: |-
              auto mydp = (MyTFTeSPI *)(id(my_tftespi_id));
              mydp->setRefresh();
  - platform: template
    name: "$name right"
    id: btn_right
    lambda: 'return (0.82+$btn_slop > id(btns_val).state && 0.82-$btn_slop < id(btns_val).state);'
    on_press:
      - then:

#  - platform: gpio
#    name: "$name side"
#    id: btn_side
#    pin
#      number: GPIO0
#      inverted: true
#      mode:
#        input: true
#        pullup: true

climate:
  - platform: thermostat
    name: "$name thermostat"
    sensor: climate_clone_current_temperature

    min_idle_time: 1s

    min_cooling_off_time: 1s
    min_cooling_run_time: 4s

    min_heating_off_time: 1s
    min_heating_run_time: 4s

    min_fanning_off_time: 1s
    min_fanning_run_time: 4s

    min_fan_mode_switching_time: 1s

# these are actions which PERFORM the needed device control
    idle_action:
      - then:
          - logger.log: "IDLE"
    heat_action:
      - then:
          - logger.log: "HEAT"
    cool_action:
      - then:
          - logger.log: "COOL"
    fan_only_action:
      - then:
          - logger.log: "FAN ONLY"
    target_temperature_change_action:
      - then:
          - logger.log: "CHANGE TARGET TEMPERATURE"


    fan_mode_on_action:
      - then:
          - logger.log: "The action to call when the fan should run continuously."


#these are callbacks which respond to climate state changes
    auto_mode:
      - then:
          - logger.log: "The action to call when the climate device is placed into “auto” mode (it may both cool and heat as required)"
    off_mode:
      - then:
          - logger.log: "The action to call when the climate device is placed into “off” mode (it is completely disabled)."
    heat_mode:
      - then:
          - logger.log: "The action to call when the climate device is placed into heat mode (it may heat as required, but not cool)."
    cool_mode:
      - then:
          - logger.log: "The action to call when the climate device is placed into cool mode (it may cool as required, but not heat)."
    fan_only_mode:
      - then:
          - logger.log: "The action to call when the climate device is placed into fan only mode (it may not heat or cool, but will activate its fan as needed based on the upper target temperature value)"