[HCL] Tecnoware UPS ERA PLUS STRIP 1000 supported by BLAZER_USB

[alberto-laurella]

Tecnoware UPS ERA PLUS STRIP 1000VA
https://www.tecnoware.com/it-IT/Dettaglio/Articolo/453#

battery.charge: 100
battery.voltage: 13.60
battery.voltage.high: 13.00
battery.voltage.low: 10.40
battery.voltage.nominal: 12.0
device.type: ups
driver.name: blazer_usb
driver.parameter.bus: 001
driver.parameter.pollinterval: 2
driver.parameter.port: auto
driver.parameter.product: USB to Serial
driver.parameter.productid: 5161
driver.parameter.synchronous: auto
driver.parameter.vendorid: 0665
driver.version: 2.8.0
driver.version.internal: 0.14
driver.version.usb: libusb-1.0.26 (API: 0x1000109)
input.current.nominal: 2.0
input.frequency: 50.1
input.frequency.nominal: 50
input.voltage: 228.7
input.voltage.fault: 228.7
input.voltage.nominal: 230
output.voltage: 228.7
ups.beeper.status: enabled
ups.delay.shutdown: 30
ups.delay.start: 180
ups.load: 18
ups.productid: 5161
ups.status: OL
ups.type: offline / line interactive
ups.vendorid: 0665

Instant commands supported on UPS [ups]:
beeper.toggle - Toggle the UPS beeper
load.off - Turn off the load immediately
load.on - Turn on the load immediately
shutdown.return - Turn off the load and return when power is back
shutdown.stayoff - Turn off the load and remain off
shutdown.stop - Stop a shutdown in progress
test.battery.start - Start a battery test
test.battery.start.deep - Start a deep battery test
test.battery.start.quick - Start a quick battery test
test.battery.stop - Stop the battery test

[alberto-laurella]

Example ups.conf:

[ups]
        driver = blazer_usb
        port = auto
        vendorid = 0665
        productid = 5161
        desc = "Tecnoware Era Plus Strip"
        product = "USB to Serial"

[jimklimov]

Thanks!