Hijacking topic for help with delphi MST2_EU_VW_P0867D navignore

[charliesz]

Hello,
I'm sorry for hijacking this topic for a problem with a delphi unit: MST2_EU_VW_P0867D
https://file.io/vYyPwjTF9MuA [Backup, log.txt, navignore.txt]

I could not find a good other place to ask for help, I hope here in "discussion" it is not too disturbing or maybe someone could guide me to another place to ask for help.

I think @lprot is the one who can help the most. With the discribed unit the navignore.sh is not working. I followed your step by step instructions. (Patching with sd-card -> firmware update; reboot unit; copy navignore.sh as delphi.sh in root of the sd-card and reboot unit; result: red screen aborted). Can you please help me getting it working?

By the way -> fantastic work of you guys with the toolbox and the still ongoing development for additional features you are implementing! You are heros!

Thank you

[lprot]

Update to 879 and install the patch.

[Przenek77]

Hello,

charliesz, were you able to solve your problem?
I have the same unit as you and I wonderig what version of toolbox should I use.
In the main page, there is the info that this toolbox version is only compatible with MIB STD2 PQ/ZR Technisat/Preh units and is NOT COMPATIBLE with MIB2 STD Delphi and MIB2 HIGH Harman units!

So what toolbox is compatibile with MST2_EU_VW_P0867D?

Thank you

[charliesz]

You are looking for "congo and duke activator". You can follow this steps: https://www.drive2.ru/b/647754736589611644/

[Przenek77]

thank you for prompt response,

Have you succeeded in your case?

[charliesz]

Not yet.
Tomorrow I will update the unit from 867 to 879 and reflash the congo and duke activator and start the navignore script.

[charliesz]

It did work as expected.

1. Update to 0879 via SD from 0867 (ca. 20 min. without battery charger [ light off+clima off]) + reboot
2. Congo & Duke SD-Card Software Update + reboot
3. Congo & Duke SD-Card with activate-navignore-Script as file named delphi.sh in root of SD inserted then reboot
4. error via VCDS removed + xor error calculated and removed

It took me, with some VCDS auto-scans, ca. 1h to do this task above.