Releases: openebs/mayastor
v2.7.3
Release v2.7.3
Release Date: 23rd January, 2025
Summary
OpenEBS Replicated PV Mayastor version 2.7.3 provides some important stability bugfixes for the data and control plane.
It's recommended that you upgrade to 2.7.3 from any previous version.
Full Change Log:
v2.7.2
Release v2.7.2
Release Date: 24th December, 2024
Summary
OpenEBS Replicated PV Mayastor version 2.7.2 provides some important stability bugfixes for the data and control plane.
It's recommended that you upgrade to 2.7.2 from any previous version.
Fixes
- fix(self-shutdown): abort frozen ios when unsharing shutdown nexus
- chore: increase ps_retries and silence log once logged
- fix(nexus): don't persist if child faults during nexus create
- fix: check valid sct and sc combinations for pi error
- fix: use auto-detected sector size for blockdev
- fix(csi/controller): don't return error on host mismatch
- feat(csi-driver): add pre-publish hook to cleanup stale entries
- fix(rest): make readiness check atomic The readiness check API depends on the agent-core service's Node gRPC endpoint. The current RwLock lets multiple tokio threads probe the agent-core. This is not ideal. This change makes the get operation atomic, so that agent-core state cache updates could be performed by only a single thread, and the updated cache should feed the next few ready calls.
- fix(csi-driver): trace was mistakenly added as info
- feat(csi-driver): use tokio_stream unixlistenerstream
- fix(volume): don't allow unpublish from non-frontend node
- fix(resize): atomically check for the required size
- fix(fsfreeze): improved error message when volume is not staged
- fix(deployer): increasing the max number of allowed connection attempts to the io-engine
- fix(topology): hasTopologyKey overwites affinityTopologyLabels
- refactor: allow importing the diskpool cr only
Full Change Log:
v2.7.2-rc.4
What's Changed
- fix(self-shutdown): abort frozen ios when unsharing shutdown nexus by @tiagolobocastro in #1788
Full Changelog: v2.7.2-rc.3...v2.7.2-rc.4
Contributors
Assets 7
v2.7.2-rc.3
What's Changed
- fix: silence ps retries log once logged by @Abhinandan-Purkait in #1786
- fix(csi/controller): don't return error on host mismatch by @tiagolobocastro in openebs/mayastor-control-plane#907
- ci: skip krew release bot workflow for pre-release by @niladrih in openebs/mayastor-extensions#590
- refactor(upgrade): expose modules to pub scope by @niladrih in openebs/mayastor-extensions#591
- feat(helm chart): add value to modify ps retries by @Abhinandan-Purkait in openebs/mayastor-extensions#592
Full Change Log:
Contributors
Assets 7
v2.7.2-rc.2
What's Changed
- Cherry pick PR #1780 by @dsharma-dc in #1782
- Cherry pick health probes by @niladrih in openebs/mayastor-control-plane#904
- Cherry pick csi-trace and csi-node uri fixes to develop by @tiagolobocastro in openebs/mayastor-control-plane#901
- feat(csi-driver): add pre-publish hook to cleanup stale entries by @Abhinandan-Purkait in openebs/mayastor-control-plane#905
- Cherry pick health probes by @niladrih in openebs/mayastor-extensions#582
- chore: fix helm-testing versioning in publish-chart-yaml by @blaisedias in openebs/mayastor-extensions#584
- Cherry-Pick PR 585 by @tiagolobocastro in openebs/mayastor-extensions#586
- feat(helm chart): add timeout for csi attacher and remove command from csi node by @Abhinandan-Purkait in openebs/mayastor-extensions#587
- ci: various release chart update fixes by @tiagolobocastro in openebs/mayastor-extensions#579
Full Change Log:
Contributors
Assets 7
v2.7.2-rc.1
What's Changed
- Backport fixes for release/2.7 by @tiagolobocastro in #1775
Full Changelog: v2.7.1...v2.7.2-rc.1
Contributors
Assets 7
v2.7.1
Release v2.7.1
Release Date: 20th September, 2024
Summary
OpenEBS Replicated PV Mayastor version 2.7.1 provides some important stability bugfixes for the data-plane.
It's recommended that you upgrade to 2.7.1 from any previous version.
Fixes
- Remove Fabrics connect timeouts due to Reactor block by @tiagolobocastro in
#1711 - Prevent Stuck rebuilds and stuck nexus subsystems by @tiagolobocastro in
#1721 - Change invalid error code on locked resource by @tiagolobocastro in
#1736 - Add missing devices in the allowed major list by @tiagolobocastro in
#1740 - Add missing labels cli for pools by @sinhaashish in
openebs/mayastor-control-plane#856 - Don't destroy replicas part of shutdown nexuses by @tiagolobocastro in
openebs/mayastor-control-plane#862
Full Change Log:
Contributors
Assets 7
v2.7.0
Release v2.7.0
Release Date: 5th July, 2024
Summary
OpenEBS Replicated PV Mayastor version 2.7 provides placement of replica volumes across different nodes/pools. Version 2.7 has enhanced snapshot capabilities to ensure file-system consistency across multiple replicas before taking snapshots. This release provides the capability to restore from snapshot across multiple and supports volume expansion even in the presence of snapshots. In addition, this release has fixes related to snapshots, upgrades and supportability.
Features
Placement of Replica Volumes Across Different Nodes/Pools
Mayastor now uses topology parameters defined in the storage class to determine the placement of volume replicas. This allows replicas can be controlled via labels from the storage class.
Snapshot Across Multiple Replicas
Mayastor has enhanced its snapshot capabilities to ensure file-system consistency across multiple replicas before taking snapshots. This ensures that snapshots are consistent and reliable across multiple replicas
Restore Across Multiple Replicas
The capability to restore from snapshots across multiple replicas has been introduced in recent releases, enhancing data recovery options.
Expansion of volumes with snapshots
The latest release, Mayastor v2.7, includes support for volume expansion even when snapshots are present
Snapshot Fixes
Upgrade Fixes
Enhancements:
feat: expose io-engine version via rest · openebs/mayastor-control-plane@9dfb153
feat(rebuild): prefer a local replica as a rebuild source · openebs/mayastor@c3816b9
feat(config): extends config yaml with core config and delay mode · openebs/mayastor@6d6fc65
fix: crash when there are no bdevs · openebs/mayastor@5575858
fix(ha/node): don't replace path if nqn is not found · openebs/mayastor-control-plane@07ca344
fix: crash when there are no bdevs · openebs/mayastor@5575858
feat(lvs): special error code for out-of-metadata condition · openebs/mayastor@349a07c
fix: update blob metadata during properties update · openebs/mayastor@7ad7a33
Solutions:
- Mayastor support in GKE with local SSD’s
- Mayastor support in Talos
- Provisioning RWX PVC’s
- Velero DR for LocalPV ZFS
Testing
Mayastor is subject to extensive unit, component and system-level testing throughout the development and release cycle. Resources for system-level (E2E) testing are currently provided by DataCore Software.
At this time, personnel and hardware resource limitations constrain testing by the maintainers to linux builds on x86. This reflects the primary use-case which the maintainers are currently targeting with the OpenEBS Mayastor project. Therefore, the use of Mayastor with other operating systems and/or architectures, if even possible, should be considered serendipitous and wholly experimental.
This release has been subject to End-to-End testing under Ubuntu 20.04.5_LTS (kernel: ubuntu-5.15.0-50-generic)
- Tested k8s versions
- 1.23.7
- 1.24.14
- 1.25.10
Known Behavioural Limitations
As with the previous versions, the Mayastor IO engine makes full utilisation of the allocated CPU cores regardless of I/O load. This is the poller operating at full speed, waiting for I/O.
As with the previous versions, a Mayastor DiskPool is limited to a single block device and cannot span across more than one block device.
Known Issues
Mayastor does not support the capacity expansion of DiskPools as of v2.6.0
Under heavy IO and constant scaling up-down of volume replicas, the io-engine pod has been observed to restart occasionally.
v2.6.1
Release v2.6.1
Release Date: 19th April, 2024
Summary
OpenEBS Replicated PV Mayastor version 2.6 provides volume expansion support for a Mayastor volume with automatic resizing of file-system by the CSI-resizer. Mayastor v2.6 enhances snapshot capabilities by ensuring file-system consistency before taking a snapshot. Mayastor v2.6 also enhances monitoring by exporting performance metrics like IOPs, throughput, and latency for Mayastor pools, volumes, and replicas. In this release, the event generation capabilities have been expanded to include more events. In addition, this release has fixes related to snapshots, upgrades, availability, stability, and supportability.
What's Changed
This patch fixes an issue for older Linux kernels (<5.8) where /proc/mounts iteration would deadlock causing CSI volumes to get stuck during the staging process.
Fixes
- fix(block/list): update deps to get safeMountIter fix by @tiagolobocastro in #1639
- fix(csi-node/mounts): update deps to get safeMountIter fix by @tiagolobocastro in openebs/mayastor-control-plane#809
- chore(helm): add helm var to control safe mounts by @tiagolobocastro in openebs/mayastor-extensions#491
Testing
Mayastor is subject to extensive unit, component and system-level testing throughout the development and release cycle. Resources for system-level (E2E) testing are currently provided by DataCore Software.
At this time, personnel and hardware resource limitations constrain testing by the maintainers to linux builds on x86. This reflects the primary use-case which the maintainers are currently targeting with the OpenEBS Mayastor project. Therefore, the use of Mayastor with other operating systems and/or architectures, if even possible, should be considered serendipitous and wholly experimental.
This release has been subject to End-to-End testing under Ubuntu 20.04.5_LTS (kernel: ubuntu-5.15.0-50-generic)
- Tested k8s versions
- 1.23.7
- 1.24.14
- 1.25.10
Known Behavioural Limitations
As with the previous versions, the Mayastor IO engine makes full utilisation of the allocated CPU cores regardless of I/O load. This is the poller operating at full speed, waiting for I/O.
As with the previous versions, a Mayastor DiskPool is limited to a single block device and cannot span across more than one block device.
Known Issues
Mayastor does not support the capacity expansion of DiskPools as of v2.6.1.
Contributors
Assets 7
v2.6.0
fcfb6ad
tiagolobocastro
Tiago Castro
Release v2.6.0
Release Date: 16th April, 2024
Summary
OpenEBS Replicated PV Mayastor version 2.6 provides volume expansion support for a Mayastor volume with automatic resizing of file-system by the CSI-resizer. Mayastor v2.6 enhances snapshot capabilities by ensuring file-system consistency before taking a snapshot. Mayastor v2.6 also enhances monitoring by exporting performance metrics like IOPs, throughput, and latency for Mayastor pools, volumes, and replicas. In this release, the event generation capabilities have been expanded to include more events. In addition, this release has fixes related to snapshots, upgrades, availability, stability, and supportability.
Features
Volume Expansion
Mayastor 2.6 adds support for allowVolumeExpansion CSI capability to resize the volumes and the mounted file-systems. Mayastor CSI plugin provides support for the expansion of volume in both online and offline states.
Refer to the documentation for more details.
Filesystem Consistent Snapshot
Mayastor 2.6 makes a best effort to ensure the mounted filesystem is consistent while taking a snapshot of the underlying volume. This allows the file-system to be recovered in a good state when the volume is restored from the snapshot.
Refer to the documentation for more details.
Performance Metrics
Mayastor 2.6 enhances product monitoring by exposing performance metrics like in the Prometheus format in addition to the existing metrics for capacity and state. IO, Throughput and Latency counters for Read and Write operations of DiskPools, Volumes and Replicas are added to the list of metrics exported from the IO Engine exporter.
Refer to the documentation for more details.
Events
The eventing framework was introduced in the Mayastor 2.4. The generated events are published onto a NATS message bus.
In 2.6, new events get generated during the provisioning of snapshots and clones, and state changes for nexus, sub-system, reactor, replica, and node.
Refer to the documentation for the list of available events.
Improvements and Stability Fixes
Rebuild refactoring by tiagolobocastro · Pull Request #1581 · openebs/mayastor
Rebuild Rangers by tiagolobocastro · Pull Request #1594 · openebs/mayastor
fix(nvmf): fixing duplicate QID error by dsavitskiy · Pull Request #1616 · openebs/mayastor
Reconnect IO log on Detach by tiagolobocastro · Pull Request #1619 · openebs/mayastor
Repo chores by tiagolobocastro · Pull Request #717 · openebs/mayastor-control-plane
Node labelling UX by tiagolobocastro · Pull Request #726 · openebs/mayastor-control-plane
Tracing and Platform fixes by tiagolobocastro · Pull Request #782 · openebs/mayastor-control-plane
Performance and Scalability Fixes
Supportability Fixes
add json formatting support by abhilashshetty04 · Pull Request #745 · openebs/mayastor-control-plane
[fix(kubectl/dump/etcd): use correct namespace by tiagolobocastro · Pull Request #437 · openebs/mayastor-extensions](https://github.com/openebs/mayastor-extensions/pull...