SSH error

[MaginaHou]

I am using a Xiaomi 10 Gigabit router, and in the early stages, SSH can be enabled through this software. After opening it, I tried flashing the device a few more times. Now, when I click on 2, it will report an error as shown in the picture. Could you please help me identify where the problem lies.

[Polarisazz]

Same here

[Polarisazz]

Hey,I've found a solution.Just use telnet to access the router,enter "sed -i '/flg_ssh=nvram get ssh_en/{:loop; N; /\n.*channel=/sbin/uci get /usr/share/xiaoqiang/xiaoqiang_version.version.CHANNEL\n.*return 0\n.*fi/!b loop; d}' /etc/init.d/dropbear",enter "/etc/init.d/dropbear restar".Then you can use SSH.

[MaginaHou]

Hey,I've found a solution.Just use telnet to access the router,enter "sed -i '/flg_ssh=nvram get ssh_en/{:loop; N; /\n.*channel=/sbin/uci get /usr/share/xiaoqiang/xiaoqiang_version.version.CHANNEL\n.*return 0\n.*fi/!b loop; d}' /etc/init.d/dropbear",enter "/etc/init.d/dropbear restar".Then you can use SSH.

Thx. I will try it.

[lan493]

Hey,I've found a solution.Just use telnet to access the router,enter "sed -i '/flg_ssh=nvram get ssh_en/{:loop; N; /\n.*channel=/sbin/uci get /usr/share/xiaoqiang/xiaoqiang_version.version.CHANNEL\n.*return 0\n.*fi/!b loop; d}' /etc/init.d/dropbear",enter "/etc/init.d/dropbear restar".Then you can use SSH.
不对啊老哥，telnet命令之后没有作用，还是你哪里打错了