ROCK 5B+卡在Starting Kernel

[Forfires]

Device Information | 设备信息

• SOC: RK3588
• Model: ROCK 5B+
• Kernel: 6.12.41

Describe the bug | 问题描述
新买了个rock 5b+，刷入Armbian_25.11.1_Rock-5b_noble_current_6.12.58_gnome_desktop.img一切正常，但是刷入最新的fn镜像，板子一直亮蓝灯。串口信息如下：

LPDDR5, 2400MHz
channel[0] BW=16 Col=10 Bk=16 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=4096MB
ch1 ttot7
channel[1] BW=16 Col=10 Bk=16 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=4096MB
ch2 ttot7
channel[2] BW=16 Col=10 Bk=16 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=4096MB
ch3 ttot7
channel[3] BW=16 Col=10 Bk=16 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=4096MB
Manufacturer ID:0x6
DQS rds:l0,h2
CH0 RX Vref:29.7%, TX Vref:20.0%,20.0%
DQ rds:h2 l0 l0 l0 h1 h5 h2 h1, h3 h2 l0 h2 h1 h2 h3 h1

DQS rds:h1,h1
CH1 RX Vref:27.9%, TX Vref:21.0%,22.0%
DQ rds:l0 l1 h1 h2 l0 h2 l0 l0, h1 h1 l0 h3 h2 h7 l0 h1

DQS rds:h2,l0
CH2 RX Vref:31.8%, TX Vref:19.0%,19.0%
DQ rds:h2 h1 l0 h2 h3 h2 h2 h2, h1 h1 h5 h1 h3 h2 h1 h2

DQS rds:l0,h1
CH3 RX Vref:31.4%, TX Vref:19.0%,20.0%
DQ rds:h1 h1 h1 h3 l0 h5 h1 h3, h1 h2 h4 h1 h1 l0 h1 h3

stride=0x2, ddr_config=0x6
hash ch_mask0-1 0x20 0x40, bank_mask0-3 0x0 0x2400 0x44800 0x89000, rank_mask0 0x2000
change to F1: 534MHz
ch0 ttot6
ch1 ttot6
ch2 ttot6
ch3 ttot6
change to F2: 1320MHz
ch0 ttot8
ch1 ttot8
ch2 ttot8
ch3 ttot8
change to F3: 1968MHz
ch0 ttot6
ch1 ttot6
ch2 ttot6
ch3 ttot6
change to F0: 2400MHz
ch0 ttot7
ch1 ttot7
ch2 ttot7
ch3 ttot7
out

U-Boot SPL 2026.01-rc2_armbian-2026.01-rc2-S365a-P7e5c-H37ef-V46b0-B4d1d-R448a (Jan 05 2026 - 03:23:25 +0000)
Trying to boot from MMC2
## Checking hash(es) for config config-1 ... OK
## Checking hash(es) for Image atf-1 ... sha256+ OK
## Checking hash(es) for Image u-boot ... sha256+ OK
## Checking hash(es) for Image fdt-1 ... sha256+ OK
## Checking hash(es) for Image atf-2 ... sha256+ OK
## Checking hash(es) for Image atf-3 ... sha256+ OK
NOTICE:  BL31: v2.13.0(release):armbian
NOTICE:  BL31: Built : 03:23:03, Jan  5 2026
INFO:    GICv3 without legacy support detected.
INFO:    ARM GICv3 driver initialized in EL3
INFO:    Maximum SPI INTID supported: 511
INFO:    BL31: Initializing runtime services
INFO:    BL31: Preparing for EL3 exit to normal world
INFO:    Entry point address = 0xa00000
INFO:    SPSR = 0x3c9


U-Boot 2026.01-rc2_armbian-2026.01-rc2-S365a-P7e5c-H37ef-V46b0-B4d1d-R448a (Jan 05 2026 - 03:23:25 +0000)

Model: FriendlyElec CM3588 NAS
SoC:   RK3588
DRAM:  16 GiB
rockchip_rk805 pmic@0: pinctrl_select_state_full: uclass_get_device_by_phandle_id: err=-19
rockchip_rk805 pmic@0: pinctrl_select_state_full: uclass_get_device_by_phandle_id: err=-19
rockchip_rk805 pmic@0: pinctrl_select_state_full: uclass_get_device_by_phandle_id: err=-19
PMIC:  RK806 (on=0x40, off=0x00)
Core:  422 devices, 34 uclasses, devicetree: separate
MMC:   mmc@fe2c0000: 1, mmc@fe2e0000: 0
Loading Environment from nowhere... OK
In:    serial@feb50000
Out:   serial@feb50000
Err:   serial@feb50000
Model: FriendlyElec CM3588 NAS
SoC:   RK3588
rockchip_dnl_key_pressed: no saradc device found
Net:   No ethernet found.
LED 'green' not found (err=-19)
LED 'green' not found (err=-19)
Hit any key to stop autoboot: 0
Scanning for bootflows in all bootdevs
Seq  Method       State   Uclass    Part  Name                      Filename
---  -----------  ------  --------  ----  ------------------------  ----------------
Scanning global bootmeth 'efi_mgr':
Card did not respond to voltage select! : -110
Cannot persist EFI variables without system partition
  0  efi_mgr      ready   (none)       0  <NULL>
** Booting bootflow '<NULL>' with efi_mgr
Loading Boot0000 'mmc 1' failed
EFI boot manager: Cannot load any image
Boot failed (err=-14)
Scanning bootdev 'mmc@fe2c0000.bootdev':
  1  script       ready   mmc          1  mmc@fe2c0000.bootdev.part /boot.scr
** Booting bootflow 'mmc@fe2c0000.bootdev.part_1' with script
Boot script loaded from mmc 1:1
226 bytes read in 2 ms (110.4 KiB/s)
19241516 bytes read in 1606 ms (11.4 MiB/s)
31459840 bytes read in 2622 ms (11.4 MiB/s)
117008 bytes read in 16 ms (7 MiB/s)
Working FDT set to 12000000
Trying kaslrseed command... Info: Unknown command can be safely ignored since kaslrseed does not apply to all boards.
Unknown command 'kaslrseed' - try 'help'
## Loading init Ramdisk from Legacy Image at 12180000 ...
   Image Name:   uInitrd
   Image Type:   AArch64 Linux RAMDisk Image (uncompressed)
   Data Size:    19241452 Bytes = 18.4 MiB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 12000000
   Booting using the fdt blob at 0x12000000
Working FDT set to 12000000
   Loading Ramdisk to eb5a6000, end ec7ff9ec ... OK
   Loading Device Tree to 00000000ecb28000, end 00000000ecbacfff ... OK
Working FDT set to ecb28000

Starting kernel ...

刷入armbian是没有问题的，截图如下：