600SeriesUploader Next poll due later than XDrip+ Next poll time

[seletok]

Your Environment

• Uploader Version Number: v0.7.1
• Your Android Phone Model Name (e.g. Samsung J1 Ace): Sony Xperia X Compact
• Android Version Number (e.g. use 4.4 for 4.4.4): 8.0.0
• Network Connection at the time the issue occurred (Wi-Fi, Mobile): Wifi
• (if relevant) Nightscout website version (e.g. 0.8.4 Funnel cake, master / dev branch): 13.0.1

Brief Explanation of Issue

Dear Lennart and Dear All! First of all, thank you for your work to help diabetics! I use your 600SeriesUploader to download data from Medtronic 640g pump, via Contour Next Link 2.4. Data upload to nightscout, and download with XDdrip+ to the Samsung S10. The 600SeriesUploader is installed on the Sony Xperia X Compact (Uploader). My problem is: In the 600SeriesUploader (debug mode) the next poll time with pump is for example at 13:31:41. In the same time on S10 in Xdrip+ the Next poll time is 13:31:11. In this case Xdrip download old data from Nightscout, after aprox 20 sec 600SeriesUploader refresh data in nightscout, but these refreshed data will be download on Xdrip+ after another 5 minutes. And in this case I have an 9 minutes delayed data on S10 Xdrip+.

In 600SeriesUploader the Next poll due showing 13:41. BUT the effective poll was released at 13:31:41. Is 41 sec later than showing previous. Every time. Why is that late?
Can you help where I correct my settings?

Uploader Error Code

Steps to Reproduce (for bugs)

Severity Score

4

[Pogman]

This is a xDrip issue and it's reported here:
NightscoutFoundation/xDrip#1088

[seletok]

Thank you for your clarification. Hope the problem will solve.
Regards,

[seletok]

I am not a programmer... But what I see, 600SeriesUploader says Next poll due at 17:01, BUT the effective poll realized at 17:01:41. After 41 sec of the planned poll time. Time is the same on 600SeriesUploader and the pump.

[Pogman]

The time you see there is just the hour and minute and this is for the user friendly logs. If you want the detailed user log enable "extended errors" in the debug menu and this will show seconds and a lot of other details.

[seletok]

You are right. Thank you again.