This repository is configured to run arista.cvp & arista.avd ansible collections against the Arista Test Drive (ATD) Topology (specifically the Level 3/CVP topology).
| Device | IP Address |
|---|---|
| spine1 | 192.168.0.11 |
| spine2 | 192.168.0.12 |
| spine3 | 192.168.0.13 |
| leaf1 | 192.168.0.21 |
| leaf2 | 192.168.0.22 |
| leaf3 | 192.168.0.23 |
| leaf4 | 192.168.0.24 |
Make sure you're in the persist directory, then clone this repository:
git clone https://github.com/tonybourkesdnpros/AVD-Level3
You will need to downgrade your arista.cvp module:
ansible-galaxy collection install arista.cvp --force
edit credentials in vscode: atd-inventory/inventory.yml
(put your lab password in for ansible_password and ansible_ssh_pass)
The atd-reset-labs playbook will pull off any configlets that are not part of the base configuration (ATD-INFRA and switch-base configlets). It will also place the spines and leafs in the default containers, in case you've moved them for any reason. (Note: if you're using Studios, you need to de-provision all switches from Studios, as only Studios can remove Studios-generated configlets).
ansible-playbook playbooks/atd-reset-labs.yml
The playbook will create tasks, but not a change control, so create a change control with the open tasks and execute the change control.
Run the fabric deploy playbook
ansible-playbook playbooks/atd-fabric-deploy.yml
This will take about 2-3 minutes, and will create a series of tasks in CloudVision. When the playbook is complete, create a change control from these tasks and execute it (you may see some errors, that's OK).
Verify the fabric is configured show ip bgp summary show bgp evpn summary
ansible-playbook playbooks/atd-validate-states.yml
ansible-playbook playbooks/atd-snapshot.yml
Project is published under Apache License.