build.ps1

#! /usr/bin/pwsh

<#
    .SYNOPSIS
        Used to build and import the Pester module during Pester development.

        The code that should be excluded from the build is wrapped in this if:
        # PESTER_BUILD
        if (-not (Get-Variable -Name "PESTER_BUILD" -ValueOnly -ErrorAction Ignore)) {
            ...Your code here...
        }
        # end PESTER_BUILD

        This will exclude the code from execution when dot-sourcing, but keep it when running the
        file directly. When inlining into single file, the regex below will omit the wrapped code.
        The # endif comment is significant, because it allows the regex to identify the correct end }.

        You can also include the code in build. Which will run the code only when dot-sources into Pester.psm1.

        # PESTER_BUILD
        if ((Get-Variable -Name "PESTER_BUILD" -ValueOnly -ErrorAction Ignore)) {
            ...Your code here...
        }
        # end PESTER_BUILD

        Or any other if that uses the variable.

        Any such blocks will be excluded entrily when inlining.

    .PARAMETER Load
        Imports the built Pester module in a separate PowerShell session
        and measure how fast it imports. If the module cannot be imported it throws
        an error.

    .PARAMETER Clean
        Cleans the build folder ./bin and rebuilds the assemblies.

    .PARAMETER Configuration
        The configuration used to build the assemblies. Only used in combination with -Clean. Defaults to Release.

    .PARAMETER LockedRestore
        Restore nuget packages using the nuget lock file. Useful only for CI.

    .PARAMETER Inline
        Inline all files into Pester.psm1, instead of dot-sourcing. This is how the real build is done,
        but inlinig the files is annoying for local development.

        $env:PESTER_BUILD_INLINE=1 environment variable is used to force inlining in files that don't provide
        the -Inline parameter. When this gets stuck, and you see your module inline even when it should not,
        use -Inline:$false to reset it to 0.

    .PARAMETER Inline
        Builds the module as a single Pester.psm1-file, instead of dot-sourcing the files. This is the mode used in release build.
#>

[CmdletBinding()]
param (
    [switch] $Load,
    [switch] $Clean,
    [ValidateSet('Debug', 'Release')]
    [string] $Configuration = 'Release',
    [switch] $LockedRestore,
    [switch] $Inline,
    [switch] $Import
)

$ErrorActionPreference = 'Stop'
Get-Module Pester | Remove-Module

if ($Clean -and $PSVersionTable.PSVersion -lt [version]'5.1') {
    throw 'Clean build of Pester requires PowerShell 5.1 or greater. If you have already compiled the assemblies and only modified powershell-files, try calling ./build.ps1 without -Clean.'
}

if ($Clean -and (Test-Path "$PSScriptRoot/bin")) {
    Remove-Item "$PSScriptRoot/bin" -Recurse -Force
}

if ($Clean) {
    # Using Import-LocalizedData over Test-ModuleManifest because the latter requires psm1 and
    # PesterConfiguration.Format.xml to exists which are both generated later in build script
    $manifest = Import-LocalizedData -FileName 'Pester.psd1' -BaseDirectory "$PSScriptRoot/src"
    if (-not $LockedRestore) {
        dotnet restore "$PSScriptRoot/src/csharp/Pester.sln"
    }
    else {
        dotnet restore "$PSScriptRoot/src/csharp/Pester.sln" --locked-mode
    }
    dotnet build "$PSScriptRoot/src/csharp/Pester.sln" --no-restore --configuration $Configuration -p:VersionPrefix="$($manifest.ModuleVersion)" -p:VersionSuffix="$($manifest.PrivateData.PSData.Prerelease)"
    if (0 -ne $LASTEXITCODE) {
        throw 'build failed!'
    }
}

if ($Clean) {
    # Update PesterConfiguration help in about_PesterConfiguration
    if ($PSVersionTable.PSVersion.Major -ge 6) {
        $null = [Reflection.Assembly]::LoadFrom("$PSScriptRoot/src/csharp/Pester/bin/$Configuration/net6.0/Pester.dll")
    }
    else {
        $null = [Reflection.Assembly]::LoadFrom("$PSScriptRoot/src/csharp/Pester/bin/$Configuration/net462/Pester.dll")
    }

    function Format-NicelyMini ($value) {
        if ($value -is [bool]) {
            if ($value) {
                '$true'
            }
            else {
                '$false'
            }
        }

        if ($value -is [int] -or $value -is [decimal]) {
            return $value
        }

        if ($value -is [string]) {
            if ([String]::IsNullOrEmpty($value)) {
                return '$null'
            }
            else {
                return "'$value'"
            }
        }

        # does not work with [object[]] when building for some reason
        if ($value -is [System.Collections.IEnumerable]) {
            if (0 -eq $value.Count) {
                return '@()'
            }
            $v = foreach ($i in $value) {
                Format-NicelyMini $i
            }
            return "@($($v -join ', '))"
        }
    }

    # generate help for config object and insert it
    $configObject = [PesterConfiguration]::Default
    $eol = [Environment]::NewLine
    $generatedConfig = foreach ($p in $configObject.PSObject.Properties.Name) {
        $section = $configObject.($p)
        "${p}:"
        foreach ($r in $section.PSObject.Properties.Name) {
            $option = $section.$r
            $default = Format-NicelyMini $option.Default
            $type = $option.Default.GetType() -as [string]
            "    ${r}: $($option.Description)$eol    Type: ${type}$eol    Default value: ${default}$eol"
        }
    }

    $helpPath = "$PSScriptRoot/src/en-US/about_PesterConfiguration.help.txt"
    # in older versions utf8 means with BOM
    $enc = if ($PSVersionTable.PSVersion.Major -ge 7) { 'utf8BOM' } else { 'utf8' }
    $helpContent = Get-Content $helpPath -Encoding $enc

    # Get section margin from the topic name on line 2
    $margin = if ($helpContent[1] -match '^(?<margin>\s*)about_') { $matches.margin } else { '' }
    $sbf = [System.Text.StringBuilder]''
    $generated = $false
    foreach ($line in $helpContent) {
        if (-not $generated -and $line -match '^SECTIONS AND OPTIONS\s*$') {
            $generated = $true
            $null = $sbf.AppendLine("$line$eol")

            foreach ($l in @($generatedConfig -split $eol)) {
                $m = if ($l) { $margin } else { $null }
                $null = $sbf.AppendLine("$m$l")
            }
        }
        elseif ($generated -and ($line -cmatch '^SEE ALSO\s*$')) {
            $generated = $false
        }

        if (-not $generated) {
            $null = $sbf.AppendLine($line)
        }
    }

    Set-Content -Encoding $enc -Value $sbf.ToString().TrimEnd() -Path $helpPath
}

function Copy-Content ($Content) {
    foreach ($c in $content) {
        $source, $destination = $c

        $null = New-Item -Force $destination -ItemType Directory

        Get-ChildItem $source -File | Copy-Item -Destination $destination
    }
}

$content = @(
    , ("$PSScriptRoot/src/en-US/*.txt", "$PSScriptRoot/bin/en-US/")
    , ("$PSScriptRoot/src/Pester.ps1", "$PSScriptRoot/bin/")
    , ("$PSScriptRoot/src/Pester.psd1", "$PSScriptRoot/bin/")
    , ("$PSScriptRoot/src/Pester.Format.ps1xml", "$PSScriptRoot/bin/")
)

if ($Clean) {
    $content += @(
        , ("$PSScriptRoot/src/schemas/JUnit4/*.xsd", "$PSScriptRoot/bin/schemas/JUnit4/")
        , ("$PSScriptRoot/src/schemas/NUnit25/*.xsd", "$PSScriptRoot/bin/schemas/NUnit25/")
        , ("$PSScriptRoot/src/schemas/NUnit3/*.xsd", "$PSScriptRoot/bin/schemas/NUnit3/")
        , ("$PSScriptRoot/src/schemas/Cobertura/*.dtd", "$PSScriptRoot/bin/schemas/Cobertura/")
        , ("$PSScriptRoot/src/schemas/JaCoCo/*.dtd", "$PSScriptRoot/bin/schemas/JaCoCo/")
        , ("$PSScriptRoot/src/csharp/Pester/bin/$Configuration/net462/Pester.dll", "$PSScriptRoot/bin/bin/net462/")
        , ("$PSScriptRoot/src/csharp/Pester/bin/$Configuration/net6.0/Pester.dll", "$PSScriptRoot/bin/bin/net6.0/")
    )
}

Copy-Content -Content $content

if ($Clean) {
    # Generate PesterConfiguration.Format.ps1xml to ensure list view for all sections
    $configSections = $configObject.GetType().Assembly.GetExportedTypes() | Where-Object { $_.BaseType -eq [Pester.ConfigurationSection] }
    # Get internal ctor as public ctor always returns instanceId = zero guid prior to PS v7.1.0
    $formatViewCtor = [System.Management.Automation.FormatViewDefinition].GetConstructors('Instance,NonPublic')
    # Generate listcontrol views for all configuration sections
    $typeDefs = foreach ($section in $configSections) {
        $builder = [System.Management.Automation.ListControl]::Create().StartEntry()
        $section.GetProperties() | Where-Object { $_.PropertyType.IsSubclassOf([Pester.Option]) } | ForEach-Object {
            $builder.AddItemProperty($_.Name) > $null
        }
        $listControl = $builder.EndEntry().EndList()

        $ViewDef = $formatViewCtor.Invoke(($section.FullName, $listControl, [guid]::NewGuid())) -as [System.Collections.Generic.List[System.Management.Automation.FormatViewDefinition]]
        [System.Management.Automation.ExtendedTypeDefinition]::new($section.FullName, $ViewDef)
    }

    # Create view for Option to ensure Table and hide IsModified
    $builder = [System.Management.Automation.TableControl]::Create().StartRowDefinition()
    [Pester.Option[bool]].GetProperties() | Where-Object Name -NotIn 'IsModified' | ForEach-Object {
        $builder.AddPropertyColumn($_.Name, [System.Management.Automation.Alignment]::Undefined, $null) > $null
    }
    $tableControl = $builder.EndRowDefinition().EndTable()

    $ViewDef = $formatViewCtor.Invoke(('Pester.Option', $tableControl, [guid]::NewGuid())) -as [System.Collections.Generic.List[System.Management.Automation.FormatViewDefinition]]
    $typeDefs += [System.Management.Automation.ExtendedTypeDefinition]::new('Pester.Option', $ViewDef)

    # Export all formatdata
    Export-FormatData -InputObject $typeDefs -Path "$PSScriptRoot/bin/PesterConfiguration.Format.ps1xml"
}

if (-not $PSBoundParameters.ContainsKey('Inline')) {
    # Force inlining by env variable, build.ps1 is used in
    # multiple places and passing the $inline everywhere is
    # difficult.
    # Only read this option here. Don't write it.
    if ($env:PESTER_BUILD_INLINE -eq '1') {
        $Inline = $true
    }
    else {
        $Inline = $false
    }
}
else {
    # We provided Inline explicitly, write the option. This assumes that
    # you don't use -Inline:$false in any of the test scripts, otherwise the
    # test script would reset the option incorrectly.
    $env:PESTER_BUILD_INLINE = [string][int][bool] $Inline
}

$null = New-Item "$PSScriptRoot/bin" -ItemType Directory -Force

$script = @(
    "$PSScriptRoot/src/functions/Pester.SafeCommands.ps1"
    "$PSScriptRoot/src/Pester.Types.ps1"
    "$PSScriptRoot/src/Pester.State.ps1"
    "$PSScriptRoot/src/Pester.Utility.ps1"
    "$PSScriptRoot/src/Pester.Runtime.ps1"
    "$PSScriptRoot/src/TypeClass.ps1"
    "$PSScriptRoot/src/Format.ps1"
    # TODO: the original version of Format2 from assert, because it does not format strings and other stuff in Pester specific way. I've used this regex (Format-Collection|Format-Object|Format-Null|Format-Boolean|Format-ScriptBlock|Format-Number|Format-Hashtable|Format-Dictionary|Format-Nicely|Get-DisplayProperty|Get-ShortType|Format-Type), '$12' to replace in VS Code.
    "$PSScriptRoot/src/Format2.ps1"
    "$PSScriptRoot/src/Pester.RSpec.ps1"
    "$PSScriptRoot/src/Main.ps1"

    "$PSScriptRoot/src/functions/assert/*/*"
    "$PSScriptRoot/src/functions/assertions/*"
    "$PSScriptRoot/src/functions/*"

    "$PSScriptRoot/src/Module.ps1"
)

$files = Get-ChildItem $script -File | Select-Object -Unique

$sb = [System.Text.StringBuilder]""
if (-not $inline) {
    # define this on the top of the module to skip
    # the code that is wrapped in this if in different source files
    $null = $sb.AppendLine('$PESTER_BUILD=1')
}

foreach ($f in $files) {
    if ($inline) {
        $lines = Get-Content $f

        $relativePath = ($f.FullName -replace ([regex]::Escape($PSScriptRoot))).TrimStart('\').TrimStart('/')
        $null = $sb.AppendLine("# file $relativePath")
        $noBuild = $false
        foreach ($l in $lines) {
            # when inlining the code skip everything wrapped in # PESTER_BUILD, # end PESTER_BUILD
            #
            if ($l -match '^.*#\s*PESTER_BUILD') {
                # start skipping lines
                $noBuild = $true
            }

            if (-not $noBuild) {
                # append lines when we are not skipping them
                $null = $sb.AppendLine($l)
            }

            if ($l -match '^.*#\s*end\s*PESTER_BUILD') {
                # stop skipping lines
                $noBuild = $false
            }
        }
    }
    else {
        # when not inlining just dot-source the file
        if ($f.FullName -notlike "*.ps1") {
            throw "$($f.FullName) is not a ps1 file"
        }
        $null = $sb.AppendLine(". '$($f.FullName)'")
    }
}

$sb.ToString() | Set-Content "$PSScriptRoot/bin/Pester.psm1" -Encoding UTF8

$powershell = Get-Process -Id $PID | Select-Object -ExpandProperty Path

if ($Load) {
    & $powershell -c "'Load: ' + (Measure-Command { Import-Module '$PSScriptRoot/bin/Pester.psd1' -ErrorAction Stop}).TotalMilliseconds + 'ms'"
    if (0 -ne $LASTEXITCODE) {
        throw "load failed!"
    }
}

if ($Import) { Import-Module "$PSScriptRoot/bin/Pester.psd1" -Force }