Skip to content

Latest commit

 

History

History
24 lines (15 loc) · 1.79 KB

README.md

File metadata and controls

24 lines (15 loc) · 1.79 KB
Raw

Manual

DR-2 mining device can be configured and managed via web user interface instead of CLI. It is easier and simpler for users who is not a big fan of commands in terminals.

By following the steps below, DR-2 can be easily setup to work.

Note: For each machine, the default private IP address is set to be 192.168.1.200.

  • If your router in your network is set within the range of 192.168.1.*(e.g. 192.168.1.1), simply plug in the miner, and connect an Ethernet cable to your router directly.

    • Visit http://192.168.1.200 with a modern web browser (Google Chrome Recommended) from a computer connected to the same network, and use the default password admin to log in. The password admin is all lowercase.

  • If your router isn't within the network as 192.168.1.1, there are two options to make it work:

      1. Reconfigure your router to be 192.168.1.1
      1. Reconfigure your DR-2's IP address
      • Change your computer's private IP address to be 192.168.1.5, subnet mask 255.255.255.0, leave the gateway IP blank. Then connect the miner to your computer directly via an Ethernet cable.
      • Visit http://192.168.1.200 since you're on the same network now. Once you are able to get access to the web interface of DR-2, simply click on Network Configure, and modify the IP address of the Miner to whatever you want.

PLEASE BE VERY CAREFUL HERE. Any misconfigure may result in making your miner inaccessible.

  • In Pool Configure section, you can set up the username and password for mining and mineral pools address. Mining pool address format should be IP:port (e.g mine pool.in:7903). Click apply, your miner will start mining automatically in 10 seconds.
  • In ASIC Status section, the working status for the chips will be displayed.