Sound Font config.ini Configuration

This page explains the parameters that are available in a sound font's config.ini file, and provides an example file.

# Default config.ini

# This specifies how many milliseconds before the end of the "out" sound the hum
# starts to fade in. Default 100
humStart=100

# The volume of the hum sound. Can be 0-16, where 0 is muted.
# Default 15
volHum=15

# The volume of all effect sounds. Can be 0-16, where 0 is muted.
# Default 16
volEff=16

# How fast (degrees per second) we have to swing before a swing effect is
# triggered. Default 250.
ProffieOSSwingSpeedThreshold=250

# How much to bend the response curve between swing speed and swing volume.
# Can be 0.01 - 2.0, where value of 1.0 will result in no bending. Default 0.5
ProffieOSSwingVolumeSharpness=0.5

# The volume multiplier when swings are at the swing speed threshold.
# Can be 1.0 to 3.0. Default 2.0
ProffieOSMaxSwingVolume=2.0

# Specify what fraction of swing that must be played before a new swing can be
# started. Can be 0.0-1.0. Defaults to 0.5 (50%).
ProffieOSSwingOverlap=0.5

# Default 0.2
ProffieOSSmoothSwingDucking=0.2

# How slow (degrees per second) the swing has to be before it's not considered a
# swing anymore. Default 200.
ProffieOSSwingLowerThreshold=200

# Specifies how aggressive a swing has to be to be considered a slash. Once we
# reach the ProffieOSSwingSpeedThreshold, rate of swing speed change is used to
# determine if it's a swing or a slash. Default 260
ProffieOSSlashAccelerationThreshold=260

# For OLED displays. This specifies the frame rate of animations.
# Default 0
ProffieOSAnimationFrameRate=0.0