-
Notifications
You must be signed in to change notification settings - Fork 191
Expand file tree
/
Copy pathstream_join_dynamic.sv
More file actions
45 lines (40 loc) · 2 KB
/
stream_join_dynamic.sv
File metadata and controls
45 lines (40 loc) · 2 KB
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
// Copyright 2020 ETH Zurich and University of Bologna.
// Copyright and related rights are licensed under the Solderpad Hardware
// License, Version 0.51 (the "License"); you may not use this file except in
// compliance with the License. You may obtain a copy of the License at
// http://solderpad.org/licenses/SHL-0.51. Unless required by applicable law
// or agreed to in writing, software, hardware and materials distributed under
// this License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR
// CONDITIONS OF ANY KIND, either express or implied. See the License for the
// specific language governing permissions and limitations under the License.
// Authors:
// - Luca Colagrande <colluca@iis.ee.ethz.ch>
`include "common_cells/assertions.svh"
// Stream join dynamic: Joins a parametrizable number of input streams (i.e. valid-ready
// handshaking with dependency rules as in AXI4) to a single output stream. The subset of streams
// to join can be configured dynamically via `sel_i`. The output handshake happens only after
// there has been a handshake. The data channel flows outside of this module.
module stream_join_dynamic #(
/// Number of input streams
parameter int unsigned N_INP = 32'd0 // Synopsys DC requires a default value for parameters.
) (
/// Input streams valid handshakes
input logic [N_INP-1:0] inp_valid_i,
/// Input streams ready handshakes
output logic [N_INP-1:0] inp_ready_o,
/// Selection mask for the output handshake
input logic [N_INP-1:0] sel_i,
/// Output stream valid handshake
output logic oup_valid_o,
/// Output stream ready handshake
input logic oup_ready_i
);
// Corner case when `sel_i` is all 0s should not generate valid
assign oup_valid_o = &(inp_valid_i | ~sel_i) && |sel_i;
for (genvar i = 0; i < N_INP; i++) begin : gen_inp_ready
assign inp_ready_o[i] = oup_valid_o & oup_ready_i & sel_i[i];
end
`ifndef COMMON_CELLS_ASSERTS_OFF
`ASSERT_INIT(n_inp_0, N_INP >= 1, "N_INP must be at least 1!")
`endif
endmodule