princeton_spectrometer.yaml

QT3Scan:
  DAQController:
    import_path : qt3utils.applications.controllers.princeton_spectrometer
    class_name  : QT3ScanPrincetonSpectrometerController
    configure :
      exposure_time : 2000 # This is in ms
      center_wavelength : 700 # This is in nm
      sensor_temperature_set_point : -70 # This is in Celsius
      grating_selected : "[500nm,300][2][0]" # Varies based on spectrometer type
      starting_wavelength : 600
      ending_wavelength : 850
      experiment_name: "ZnOTrueShinySide"

  PositionController:
    import_path : qt3utils.applications.controllers.nidaqpiezocontroller
    class_name  : QT3ScanNIDAQPositionController
    configure :
      daq_name : Dev1  # NI DAQ Device Name
      write_channels : ao0,ao1,ao2  # NI DAQ analog output channels to use for writing position
      read_channels : ai0,ai1,ai2  # NI DAQ analog input channels to use for reading position
      scale_microns_per_volt : 8  # conversion factor from volts to microns, can also supply a list [8,8,8] or [6,4.2,5]
      zero_microns_volt_offset: 0  # the voltage value that defines the position 0,0,0, can also supply a list [0,0,0] or [5,5,5]
      minimum_allowed_position : 0  # microns
      maximum_allowed_position : 80  # microns
      settling_time_in_seconds : 0.001