Skip to content

Latest commit

 

History

History
23 lines (15 loc) · 1.11 KB

Hardware-Itead-S20.md

File metadata and controls

23 lines (15 loc) · 1.11 KB

Itead S20

ITEAD S20

Property Value
Manufacturer Itead Studio
Product page https://www.itead.cc/smart-socket.html
Wiki page https://www.itead.cc/wiki/Sonoff
Build flag ITEAD_S20
Voltage 3v3

Introduction

The Sonoff S20 is a smart plug that comes with different plug standards: EU (both Schuko-F and French-E) , US, UK, CN and AU. It is meant turn any regular wall outlet into a smart outlet. It sports a button for manual operation and two LEDs, one in sync with the relay status and the other one for user notifications.

Flashing

S20 Smart Socket - Inside front view

There is a labeled header in the front of the PCB and the button is connected to GPIO0, so no problems here.

Solder a 4 pin male or female header and connect it to your USB-to-UART bridge. Then press and hold the button and connect the programmer to your computer. The micro-controller will boot into flash mode and you are ready to update the firmware.