Makefile.extenmote_db9_v2.m88p

CC=avr-gcc
AS=$(CC)
LD=$(CC)

PROGNAME=extenmote_db9_v2
OBJDIR=objs-$(PROGNAME)
CPU=atmega88p
CFLAGS=-Wall -mmcu=$(CPU) -DF_CPU=8000000L -Os -DWITH_EEPROM -DWITH_DB9 -DDB9_V2
LDFLAGS=-mmcu=$(CPU) -Wl,-Map=$(PROGNAME).map
HEXFILE=$(PROGNAME).hex
AVRDUDE=avrdude -p m88p -P usb -c avrispmkII

#  -  -  -  -  -  BOOTSZ1  BOOTSZ0  BOOTRST
#  0  0  0  0  0     0        0        1
#EFUSE=0x01
EFUSE=0xF9

# RSTDISBL  DWEN  SPIEN   WDTON  EESAVE  BODLEVEL2  BODLEVEL1  BODLEVEL0
#    1        1      0      1      1         1          1          1
HFUSE=0xdf
#
# CKDIV8   CKOUT   SUT1  SUT0  CKSEL3  CKSEL2  CKSEL1  CKSEL0
#    1        1      1     0      0      0       1       0
#
# Clock selected: 8mhz internal RC oscillator
LFUSE=0xE2

OBJS=$(addprefix $(OBJDIR)/, main.o wiimote.o eeprom.o classic.o analog.o tripleclick.o db9.o)

all: $(HEXFILE)

clean:
	rm -f $(PROGNAME).elf $(PROGNAME).hex $(PROGNAME).map $(OBJS)

$(OBJDIR)/%.o: %.S
	$(CC) $(CFLAGS) -c $< -o $@

$(OBJDIR)/%.o: %.c
	$(CC) $(CFLAGS) -c $< -o $@

$(OBJDIR)/%.o: %.c %.h
	$(CC) $(CFLAGS) -c $< -o $@

$(PROGNAME).elf: $(OBJS)
	$(LD) $(OBJS) $(LDFLAGS) -o $(PROGNAME).elf

$(PROGNAME).hex: $(PROGNAME).elf
	avr-objcopy -j .data -j .text -O ihex $(PROGNAME).elf $(PROGNAME).hex
	avr-size $(PROGNAME).elf  -C --mcu=$(CPU)

fuse:
	$(AVRDUDE) -e -Uefuse:w:$(EFUSE):m -Uhfuse:w:$(HFUSE):m -Ulfuse:w:$(LFUSE):m -B 20.0 -v

flash: $(HEXFILE)
	$(AVRDUDE) -Uflash:w:$(HEXFILE) -B 1.0 -F

chip_erase:
	$(AVRDUDE) -e -B 1.0 -F

reset:
	$(AVRDUDE) -B 1.0 -F