Skip to content

Latest commit

 

History

History
36 lines (22 loc) · 1.42 KB

README.md

File metadata and controls

36 lines (22 loc) · 1.42 KB
Raw

Transit Model Validation Scripts

Setup Instructions

Before running the scripts, configure the paths to all necessary input and output files in the control file as described below.

Input Configuration

Specify the paths for the required input files under the [transit] section in the control file:

  • transit_line_rename.csv
  • Transit_Validation_2019 - MA.xlsx

These files should be located in your specified transit_input_dir.

Output Configuration

Specify directories for the output files where the transformed and predicted data will be saved:

  • Markdown Output Directory: Stores markdown tables.
  • MUNI Output Directory: Stores MUNI validation outputs.
  • BART Output Directory: Stores BART validation outputs.
  • Screenline Output Directory: Stores screenline validation outputs.
  • Total Output Directory: Stores all validation outputs.

Change the root directory path (e.g., X:\Projects\Miscellaneous\validation_simwrapper\transit\) as necessary. The script will automatically create required folders and subfolders.

Running the Scripts

  1. Ensure all input files are placed in the specified transit_input_dir.
  2. Run transit.py to execute the script.
  3. Check the specified output directories for results.

Ensure all dashboard YAML files are placed in the transit folder.

For issues or further configuration needs, refer to the control file comments or submit an issue on this repository.