Switch code not updating Alexa

[sim404]

Hi,
Have there been any recent changes to the way the Sinric code updates Alexa on the power state of a switch? The scenario I refer to is say a button in the device’s code turns a switch on or off locally and then tries to tell Sinric/alexa about that change something goes wrong. The Sinric app reflects the correct state as does the actual device. The Alex app however momentarily says ‘on’ but then incorrectly goes back to displaying off.

I have had the same switch code (based on the examples) running for many months without change and it worked fine until recently. So looks like something wrong between Sinric and Alexa code in that Alexa is not staying in sync. Your comments please.
Regards,
Sim

[kakopappa]

Code related to Alexa hasn’t changed for a long time. Your issue is when you use a push button to on/off switch, it doesn’t reflect in the Alexa app it that correct?

…

On Wed, 26 Nov 2025 at 8:48 PM sim404 ***@***.***> wrote: *sim404* created an issue (sinricpro/esp8266-esp32-sdk#433) <#433> Hi, Have there been any recent changes to the way the Sinric code updates Alexa on the power state of a switch? The scenario I refer to is say a button in the device’s code turns a switch on or off locally and then tries to tell Sinric/alexa about that change something goes wrong. The Sinric app reflects the correct state as does the actual device. The Alex app however momentarily says ‘on’ but then incorrectly goes back to displaying off. I have had the same switch code (based on the examples) running for many months without change and it worked fine until recently. So looks like something wrong between Sinric and Alexa code in that Alexa is not staying in sync. Your comments please. Regards, Sim — Reply to this email directly, view it on GitHub <#433>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/ABZAZZQ2C2MXGCUK7KV3HQT36WVSPAVCNFSM6AAAAACNIMWQY2VHI2DSMVQWIX3LMV43ASLTON2WKOZTGY3DONRQGIZDENY> . You are receiving this because you are subscribed to this thread.Message ID: ***@***.***>

[sim404]

Apologies, reading my post again I see that in trying to describe the issue I’ve confused it. I’ll try again: When using the Alexa app (iPhone) to turn on a Sinric device that is currently off, when I press the Alexa screen icon it momentarily displays ‘on’ but approx 500ms later returns to displaying ‘off’. The device itself has indeed turned on as intended and the Sinric app also correctly says the switch is on. So I end up with Alexa saying it’s off when the device is actually on. The same thing happens the other way around, ie if turning off a device that’s currently on.
I hope I’m making sense this time.
Regards,

[kakopappa]

Hi @sim404

Thanks for sharing details.

I have flashed the examples/Switch/Switch/Switch.ino example and tested it, works as expect.

https://www.youtube.com/shorts/U1juMstc5Kw

Only reason I can think of is, your device is returning an error back to the server (eg: success = false)

Alexa sends turn on => Sends to your device => errors (success = false) => SinricPro sends error executing => Alexa app turns back to off.

Do you see any error logs in the activity logs?

[sim404]

I uncommented the enable debug defines, ran the code, used the Alexa App to turn off one of the switches in my multiswitch code. Prior to above that switch was in an on state. The alexa app showed 'off' and approx 400ms later returned to displaying 'on'. Despite the alexa indication to the contrary the switch itself did go off, the SinricPro app worked as it should and showed off. This code has worked fine in the past, maybe Amazon has changed something??? Your comments please.

Log output follows:

--- Terminal on COM5 | 74880 8-N-1
--- Available filters and text transformations: colorize, debug, default, direct, esp32_exception_decoder, hexlify, log2file, nocontrol, printable, send_on_enter, time
--- More details at https://bit.ly/pio-monitor-filters
--- Quit: Ctrl+C | Menu: Ctrl+T | Help: Ctrl+T followed by Ctrl+H
*
sinricPro_mxxxxxxxxxxx_sim800
esp host name set to: sinricP_xxxxxxx
wifi connecting
connected to xxxxxxxx
IP address: 192.xxxxxxxxxx
broadcast address: 192.xxxxxxxxxxx
[SinricPro]: Device "5df24d130855bdxxxxxxxxx" does not exist in the internal device list. creating new device
[SinricPro:add()]: Adding device with id "5df24d130855bdxxxxxxxxx".
[SinricPro]: Device "5e52bf882e08xxxxxxxxxx" does not exist in the internal device list. creating new device
[SinricPro:add()]: Adding device with id "5e52bf882e08xxxxxxxxxxx".
[SinricPro]: Device "5e52c0656adc86xxxxxxxxx" does not exist in the internal device list. creating new device
[SinricPro:add()]: Adding device with id "5e52c0656adc86xxxxxxxxx".
[SinricPro]: Device "5e46fd6a7a70xxxxxxxxxxx" does not exist in the internal device list. creating new device
[SinricPro:add()]: Adding device with id "5e46fd6a7a70xxxxxxxxxx".
multiswitch code vs53
[SinricPro:Websocket]: Connecting to WebSocket Server (ws.sinric.pro)
[SinricPro:Websocket]: headers:
appkey:f5dd293a-8ad0-42ec-xxxxxx-xxxxxxxxxx
deviceids:5df24d130855xxxxxxxxxxxxx;5e52bf88xxxxxxx;5e52c0656adc8xxxxxxxxx;5e46fd6a7a70xxxxxxxxx
restoredevicestates:true
ip:192.xxxxxxxxxxx
mac:48:E7xxxxxxxxxxx
platform:ESP32
SDKVersion:3.5.2
[SinricPro:Websocket]: connected
[SinricPro:Websocket]: headers:
appkey:f5dd293a-8ad0-42ec-xxxxxxxxxxxxxxxxxxxxx
deviceids:5df24d13xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
restoredevicestates:false
ip:192.xxxxxxxxx
mac:48:E7:xxxxxxxx
platform:ESP32
SDKVersion:3.5.2
[SinricPro:Websocket]: receiving data
[SinricPro.handleReceiveQueue()]: 1 message(s) in receiveQueue
[SinricPro.handleReceiveQueue()]: Signature is valid. Processing message...
[SinricPro:extractTimestamp(): Got Timestamp 1764363745
[SinricPro:Websocket]: receiving data
[SinricPro.handleReceiveQueue()]: 1 message(s) in receiveQueue
[SinricPro.handleReceiveQueue()]: Signature is valid. Processing message...
[SinricPro:extractTimestamp(): Got Timestamp 1764363746
[SinricPro.handleDeviceRequest()]: handling device sope request
{
"header": {
"payloadVersion": 2,
"signatureVersion": 1
},
"payload": {
"action": "setPowerState",
"clientId": "portal",
"createdAt": 1764363746,
"deviceId": "5df24d1308xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx",
"replyToken": "552b5e55-ac80xxxxxxxxxxxxxxxxxxxxxxxxxxxxx",
"type": "request",
"value": {
"state": "On"
}
},
"signature": {
"HMAC": "MzX0zw13FRY1Vhqoge+xxxxxxxxxxxxxxxxxxxxxxxxx="
}
}[SinricPro:handleSendQueue()]: 1 message(s) in sendQueue
[SinricPro:handleSendQueue()]: Sending message...
{
"header": {
"payloadVersion": 2,
"signatureVersion": 1
},
"payload": {
"action": "setPowerState",
"clientId": "portal",
"scope": null,
"createdAt": 1764363746,
"deviceId": "5df24d1308xxxxxxxxxxxxxxxxxxxxxxx",
"message": "OK",
"replyToken": "552b5e55-ac80-xxxxxxxxxxxxxxxxxxxxxxxx",
"success": true,
"type": "response",
"value": {
"state": "On"
}
},
"signature": {
"HMAC": "RIQc+wHQKuIYSU2VPqxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx="
}
}
[SinricPro:handleSendQueue]: Sending to websocket
[SinricPro:handleSendQueue()]: message sent.
[SinricPro:Websocket]: receiving data
[SinricPro.handleReceiveQueue()]: 1 message(s) in receiveQueue
[SinricPro.handleReceiveQueue()]: Signature is valid. Processing message...
[SinricPro:extractTimestamp(): Got Timestamp 1764363746
[SinricPro.handleDeviceRequest()]: handling device sope request
{
"header": {
"payloadVersion": 2,
"signatureVersion": 1
},
"payload": {
"action": "setPowerState",
"clientId": "portal",
"createdAt": 1764363746,
"deviceId": "5e52bf88xxxxxxxxxxxxxxxxxxxxxxxxxxxx",
"replyToken": "26c3de00-2a2f-40d7xxxxxxxxxxxxxxxxxxxx",
"type": "request",
"value": {
"state": "Off"
}
},
"signature": {
"HMAC": "SfkCTvGR+3/S6kbl+xxxxxxxxxxxxxxxxxxxxxxxxxx0="
}
}[SinricPro:handleSendQueue()]: 1 message(s) in sendQueue
[SinricPro:handleSendQueue()]: Sending message...
{
"header": {
"payloadVersion": 2,
"signatureVersion": 1
},
"payload": {
"action": "setPowerState",
"clientId": "portal",
"scope": null,
"createdAt": 1764363746,
"deviceId": "5e52bf882exxxxxxxxxxxxxxxxxxxxxxxxxxx",
"message": "OK",
"replyToken": "26c3de00-2a2f-xxxxxxxxxxxxxxxxxxxxxxxxxxxxx",
"success": true,
"type": "response",
"value": {
"state": "Off"
}
},
"signature": {
"HMAC": "wmz+GdJUoShZUQYrGxxxxxxxxxxxxxxxxxxxxxxxxxxxxx="
}
}
[SinricPro:handleSendQueue]: Sending to websocket
[SinricPro:handleSendQueue()]: message sent.
[SinricPro:Websocket]: receiving data
[SinricPro.handleReceiveQueue()]: 1 message(s) in receiveQueue
[SinricPro.handleReceiveQueue()]: Signature is valid. Processing message...
[SinricPro:extractTimestamp(): Got Timestamp 1764363746
[SinricPro.handleDeviceRequest()]: handling device sope request
{
"header": {
"payloadVersion": 2,
"signatureVersion": 1
},
"payload": {
"action": "setPowerState",
"clientId": "portal",
"createdAt": 1764363746,
"deviceId": "5e52c0656adc862a75f6d6e4",
"replyToken": "d50f6dcb-040d-xxxxxxxxxxxxxxxxxxxxxxxxxxx",
"type": "request",
"value": {
"state": "Off"
}
},
"signature": {
"HMAC": "FZG4l+11kHTCi3eb39xxxxxxxxxxxxxxxxxxxxxxxxxxxxx="
}
}
multi alert device 5 turned off[SinricPro:handleSendQueue()]: 1 message(s) in sendQueue
[SinricPro:handleSendQueue()]: Sending message...
{
"header": {
"payloadVersion": 2,
"signatureVersion": 1
},
"payload": {
"action": "setPowerState",
"clientId": "portal",
"scope": null,
"createdAt": 1764363746,
"deviceId": "5e52c0656xxxxxxxxxxxxxxxxxxxxxxxxxxx",
"message": "OK",
"replyToken": "d50f6dcb-040d-xxxxxxxxxxxxxxxxxxxxx",
"success": true,
"type": "response",
"value": {
"state": "Off"
}
},
"signature": {
"HMAC": "GCa4NZavbKK7DwrWMxxxxxxxxxxxxxxxxxxxxxxxxxxxxx="
}
}
[SinricPro:handleSendQueue]: Sending to websocket
[SinricPro:handleSendQueue()]: message sent.
[SinricPro:Websocket]: receiving data
[SinricPro.handleReceiveQueue()]: 1 message(s) in receiveQueue
[SinricPro.handleReceiveQueue()]: Signature is valid. Processing message...
[SinricPro:extractTimestamp(): Got Timestamp 1764363746
[SinricPro.handleDeviceRequest()]: handling device sope request
{
"header": {
"payloadVersion": 2,
"signatureVersion": 1
},
"payload": {
"action": "setPowerState",
"clientId": "portal",
"createdAt": 1764363746,
"deviceId": "5e46fd6a7a70xxxxxxxxxxxxxxxx",
"replyToken": "808bfe23-2b13-xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx",
"type": "request",
"value": {
"state": "On"
}
},
"signature": {
"HMAC": "y/ehhm31yMV5P8qXxxxxxxxxxxxxxxxxxxxxxxxxxxx="
}
}[SinricPro:handleSendQueue()]: 1 message(s) in sendQueue
[SinricPro:handleSendQueue()]: Sending message...
{
"header": {
"payloadVersion": 2,
"signatureVersion": 1
},
"payload": {
"action": "setPowerState",
"clientId": "portal",
"scope": null,
"createdAt": 1764363746,
"deviceId": "5e46fd6a7axxxxxxxxxxxxxxxxxx",
"message": "OK",
"replyToken": "808bfe23-2b13-xxxxxxxxxxxxxxxxxxxxxxxxxxxxx",
"success": true,
"type": "response",
"value": {
"state": "On"
}
},
"signature": {
"HMAC": "Bhkn1CpIrRhxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx="
}
}
[SinricPro:handleSendQueue]: Sending to websocket
[SinricPro:handleSendQueue()]: message sent.
[SinricPro:Websocket]: receiving data
[SinricPro.handleReceiveQueue()]: 1 message(s) in receiveQueue
[SinricPro.handleReceiveQueue()]: Signature is valid. Processing message...
[SinricPro:extractTimestamp(): Got Timestamp 1764363764
[SinricPro.handleDeviceRequest()]: handling device sope request
{
"header": {
"payloadVersion": 2,
"signatureVersion": 1
},
"payload": {
"action": "setPowerState",
"clientId": "alexa-skill",
"createdAt": 1764363764,
"deviceId": "5df24d13085xxxxxxxxxxxxxx",
"replyToken": "a7be2e41-427e-xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx",
"scope": "device",
"type": "request",
"value": {
"state": "Off"
}
},
"signature": {
"HMAC": "kVe2wadBfiPr0bzcxxxxxxxxxxxxxxxxxxxxxxxxxxx="
}
}[SinricPro:handleSendQueue()]: 1 message(s) in sendQueue
[SinricPro:handleSendQueue()]: Sending message...
{
"header": {
"payloadVersion": 2,
"signatureVersion": 1
},
"payload": {
"action": "setPowerState",
"clientId": "alexa-skill",
"scope": "device",
"createdAt": 1764363764,
"deviceId": "5df24d130855xxxxxxxxxxxxx",
"message": "OK",
"replyToken": "a7be2e41-427exxxxxxxxxxxxxxxxxxxxxxxxxx",
"success": true,
"type": "response",
"value": {
"state": "Off"
}
},
"signature": {
"HMAC": "CLBKjof1cYuDRwkhyPDxxxxxxxxxxxxxxxxxxxxxxxx="
}
}
[SinricPro:handleSendQueue]: Sending to websocket
[SinricPro:handleSendQueue()]: message sent.

///////////////////////////////////////////////////

example of my powerstate code:
bool onPowerState3(const String& deviceId, bool& state) { // switch03
// Serial.printf("\r\nDevice 3 turned %s", state ? "on" : "off");
digitalWrite(sinric_sw03, state ? HIGH : LOW);
return true; // request handled properly

///////////////////////////////////////////////////
}