R Guide

This guide provides instructions for using R on research projects. Its purpose is to use with collaborators and research assistants to make code consistent, easier to read, transparent, and reproducible.

Also see my Python Guide and Stata Guide.

Style

For coding style practices, follow the tidyverse style guide.

While you should read the style guide and do your best to follow it, once you save the script you can use styler::style_file() to fix its formatting and ensure it adheres to the tidyverse style guide.
- Note: styler::style_file() overwrites files (if styling results in a change of the code to be formatted). The documentation strongly suggests to only style files that are under version control or to create a backup copy.

Packages

Use tidyverse and/or data.table for wrangling data.
- An excellent resource on tidyverse is the book R for Data Science (2nd Edition) (free online).
- An excellent primer on data.table is available here. Additionally, there is a data.table guide designed for users transitioning from Stata to R at Stata2R and a comparison of data.table and dplyr here
- For big data (millions of observations), the efficiency advantages of data.table become important.
- The efficiency advantages of data.table can be important even with smaller data sets for tasks like rbinding, reshaping (h/t Grant McDermott's benchmarks), etc.
Use stringr for manipulating strings instead of base R.
- Use stringr::str_c() instead of paste()
- Use stringr::str_sub() instead of substr()
Use purr::map_*() functions instead of lapply/sapply
- Within purr::map_*() functions as of R 4.1 you can use () instead of function(). This is known as "syntactic sugar" as it is just shorthand to make the code more concise.
Use lubridate for working with dates.
Use conflicted to explicitly resolve namespace conflicts.
- conflicted::conflict_scout() displays namespace conflicts
- conflicted::conflict_prefer() declares the package to use in namespace conflicts, and the conflict_prefer() calls should be a block of code towards the top of the script, underneath the block of library() calls.
Never use setwd() or absolute file paths. Instead, use relative file paths with the here package.
- To avoid conflicts with the deprecated lubridate::here(), if using both packages in a script, specify conflict_prefer("here", "here"). Always put library(here) last in the packages section if for some reason the user has an outdated version of lubridate
Never use numbers to subset a data set's columns. This is very error prone code because if the data set changes in later edits to the previous scripts, the code will be wrong.
Use assertthat::assert_that() frequently to add programmatic sanity checks in the code.
Use pipes like %>% from magrittr.
- See here for more on using pipes.
- Other useful pipes are the compound assignment pipe %<>% (which, unlike Hadley, I like to use) and the %$% exposition pipe.
- As of R 4.1.0, there is a built-in pipe |>. See more details here.
  - In many cases this can be used the same way as %>%.
  - So if you are not already loading a package that loads magrittr, such as dplyr or tidyverse, using |> has the benefit of needing to load one fewer package.
  - The exception to being able to use the built-in pipe |> the same way as the magrittr pipe %>% is that |> does not yet have a placeholder element, which is needed when the object being piped into a function goes to an argument other than the first argument (e.g., mtcars %>% lm(mpg ~ disp, data = .) uses %>% with the . placeholder).
Use my package tabulator for some common data wrangling tasks.
- tabulator::tab() efficiently tabulates based on a categorical variable, sorts from most common to least common, and displays the proportion of observations with each value, as well as the cumulative proportion.
- tabulator::tabcount() counts the unique number of categories of a categorical variable or formed by a combination of categorical variables.
- tabulator::quantiles() produces quantiles of a variable. It is a wrapper for base R quantile() but is easier to use, especially within data.tables or tibbles.
Use fixest for fixed effects regressions; it is much faster than lfe (and also appears to be faster than the best current Julia or Python implementations of fixed effects regression).
- An excellent primer on fixest (designed for users transitioning from Stata to R, but very useful for anyone using fixest in R) is available at Stata2R.
Use modelsummary for formatting tables.
Hmisc::describe() and skimr::skim() can be useful to print a "codebook" of the data, i.e. some summary stats about each variable in a data set. Since they do not provide identical information, it might be best to run both.
- This can be used in conjunction with sink() to print the codebook to a text file. For example:
```
library(tidyverse)
library(Hmisc)
library(skimr)
library(here)

# Write codebook to text file
sink(here("results", "mtcars_codebook.txt"))
mtcars %>% describe() %>% print() # print() needed if running script from command line
mtcars %>% skim() %>% print()
sink() # close the sink
```

Folder structure

Generally, within a project folder, we have a subfolder called analysis where we are doing data analysis (and other sub-folders like paper where the paper draft is saved). Within the analysis subfolder, we have:

An .Rproj file for the project. (This can be created in RStudio, with File > New Project.)
- Note that if you always open the Project within RStudio before working (see "Project" in the upper right-hand corner of RStudio) then the here package will work for relative filepaths.
data - only raw data go in this folder
documentation - documentation about the data goes in this folder
proc - processed data sets go in this folder
results - results go in this folder
- figures - subfolder for figures
- tables - subfolder for tables
scripts - code goes in this folder
- programs - a subfolder containing functions called by the analysis scripts (if applicable)

Scripts structure

Separating scripts

Because we often work with large data sets and efficiency is important, I advocate (nearly) always separating the following three actions into different scripts:

Data preparation (cleaning and wrangling)
Analysis (e.g. regressions)
Production of figures and tables

The analysis and figure/table scripts should not change the data sets at all (no pivoting from wide to long or adding new variables); all changes to the data should be made in the data cleaning scripts. The figure/table scripts should not run the regressions or perform other analysis; that should be done in the analysis scripts. This way, if you need to add a robustness check, you don't necessarily have to rerun all the data cleaning code (unless the robustness check requires defining a new variable). If you need to make a formatting change to a figure, you don't have to rerun all the analysis code (which can take awhile to run on large data sets).

Naming scripts

Include a 00_run.R script (described below).
Number scripts in the order in which they should be run, starting with 01.
Because a project often uses multiple data sources, I usually include a brief description of the data source being used as the first part of the script name (in the example below, ex describes the data source), followed by a description of the action being done (e.g. dataprep, reg, etc.), with each component of the script name separated by an underscore (_).

00_run.R script

Keep a "run" script, 00_run.R that lists each script in the order they should be run to go from raw data to final results. Under the name of each script should be a brief description of the purpose of the script, as well all the input data sets and output data sets that it uses. Ideally, a user could run 00_run.R to run the entire analysis from raw data to final results (although this may be infeasible for some projects, e.g. one with multiple confidential data sets that can only be accessed on separate servers).

Also include objects that can be set to 0 or 1 to only run some of the scripts from the 00_run.R script (see the example below).

Below is a brief example of a 00_run.R script.

# Run script for example project

# PACKAGES ------------------------------------------------------------------
library(here)

# PRELIMINARIES -------------------------------------------------------------
# Control which scripts run
run_01_ex_dataprep <- 1
run_02_ex_reg      <- 1
run_03_ex_table    <- 1
run_04_ex_graph    <- 1

# RUN SCRIPTS ---------------------------------------------------------------

# Read and clean example data
if (run_01_ex_dataprep) source(here("scripts", "01_ex_dataprep.R"), encoding = "UTF-8")
# INPUTS
#  here("data", "example.csv") # raw data from XYZ source
# OUTPUTS
#  here("proc", "example.rds") # cleaned 

# Regress Y on X in example data
if (run_02_ex_reg) source(here("scripts", "02_ex_reg.R"), encoding = "UTF-8")
# INPUTS
#  here("proc", "example.rds") # 01_ex_dataprep.R
# OUTPUTS 
#  here("proc", "ex_fixest.rds") # fixest object from feols regression

# Create table of regression results
if (run_03_ex_table) source(here("scripts", "03_ex_table.R"), encoding = "UTF-8")
# INPUTS 
#  here("proc", "ex_fixest.rds") # 02_ex_reg.R
# OUTPUTS
#  here("results", "tables", "ex_fixest_table.tex") # tex of table for paper

# Create scatterplot of Y and X with local polynomial fit
if (run_04_ex_graph) source(here("scripts", "04_ex_graph.R"), encoding = "UTF-8")
# INPUTS
#  here("proc", "example.rds") # 01_ex_dataprep.R
# OUTPUTS
#  here("results", "figures", "ex_scatter.eps") # figure

Graphing

Use ggplot2
For graphs with color consider colorblind-friendly palettes such as scale_color_viridis_*() or ggthemes::scale_color_colorblind().

Test whether graphs are colorblind-friendly and print-friendly by creating grayscale versions of them using colorblindr::edit_colors() as follows. A full reproducible example is in grayscale_reprex.R.

 library(tidyverse)
 library(colorblindr)
 
 # Color graph
 in_color <- mtcars %>% ggplot() +
   geom_point(aes(x = disp, y = wt, color = mpg)) +
   scale_color_viridis_c(direction = -1) +
   theme_classic()
 	
 # Black and white graph
 in_bw <- in_color %>% edit_colors(desaturate)
 in_bw %>% plot() # use grid::grid.draw() for maps

I wrote a function set_theme.R to standardize and facilitate graph formatting. It can be added to a ggplot object like any other theme would be, e.g.:
```
library(tidyverse)

# Use the defaults
mtcars %>% ggplot() + 
  geom_point(aes(y = hp, x = wt)) + 
  labs(y = "Horsepower", x = "Weight") +
  set_theme()
```
but it differs from other themes in that you can directly change its default formatting within set_theme(). For example:
```
# Change margins
mtcars %>% ggplot() + 
  geom_point(aes(y = hp, x = wt)) + 
  labs(y = "Horsepower", x = "Weight") +
  set_theme(
    y_title_margin = "r = 5",
    x_title_margin = "t = 5", 
    plot_margin = unit(c(t = 2, r = 2, b = 2, l = 2), "pt")
  )
```
See set_theme_reprex.R for more examples of its use with changes to its defaults, and look at the function itself to see what the arguments and graph formatting settings that it can change are. (Pull requests welcome to expand it to more use cases.)
For maps, use the sf package. This package makes plotting maps easy (with ggplot2::geom_sf()), and also makes other tasks like joining geocoordinate polygons and points a breeze.

Saving files

Data sets

For small data sets, save as .csv with readr::write_csv() and read with readr::read_csv(). (Note: the readr package is part of tidyverse.)
- When reading in a large .csv file from another source, it can be worth using data.table::fread() for speed improvements.
- For smaller .csv files I prefer readr::read_csv() due to a number of nice features such as the way it handles columns with dates.
For medium-sized data sets, save as .rds with saveRDS() or readr::write_rds(), and read with readRDS() or readr::read_rds().
- readr::write_rds() is a wrapper for saveRDS() that specifies compress = FALSE by default. The trade-off is that compressing (the default in saveRDS()) will make the file substantially smaller so it takes up less disk space, but it will take longer to read and write.

When doing a time-consuming map*() or loop, e.g. reading in and manipulating separate data sets for each month, it is a good idea to save intermediate objects as part of the function being called by map*() or as part of the loop. That way, if something goes wrong you won't lose all your progress.

Graphs

Save graphs with ggsave().
- For reproducible graphs (independent of the size of your Plots pane in RStudio), always specify the width and height arguments in ggsave().
- To see what the final graph looks like, open the file that you save since its appearance will differ from what you see in the RStudio Plots pane when you specify the width and height arguments in ggsave().
For higher (in fact, infinite) resolution, save graphs as .eps files. (This is better than .pdf given that .eps are editable images, which is sometimes required by journals.)
- I've written a Python function crop_eps to crop (post-process) .eps files when you can't get the cropping just right with ggplot2.

Randomization

When randomizing assignment in a randomized control trial (RCT):

Seed: Use a seed from https://www.random.org/: put Min 1 and Max 100000000, then click Generate, and copy the result into your script. Towards the top of the script, assign the seed with the line
```
seed <- ... # from random.org
```
where ... is replaced with the number that you got from random.org.
Use the randomizr package. Here is a cheatsheet of the different randomization functions.
Immediately before the line using a randomization function, include set.seed(seed).
Build a randomization check: create a second variable a second time with a new name, repeating set.seed(seed) immediately before creating the second variable. Then check that the randomization is identical using assert_that(all(df$var1 == df$var2)).
As a second randomization check, create a separate script that runs the randomization script once (using source()) but then saves the data set with a different name, then runs it again (with source()), then reads in the two differently-named data sets from these two runs of the randomization script and ensures that they are identical.
Note: if creating two cross-randomized variables, you would not want to repeat set.seed(seed) before creating the second one, otherwise it would use the same assignment as the first.

Above I described how data preparation scripts should be separate from analysis scripts. Randomization scripts should also be separate from data preparation scripts, i.e. any data preparation needed as an input to the randomization should be done in one script and the randomization script itself should read in the input data, create a variable with random assignments, and save a data set with the random assignments.

Running scripts

Once you complete a script, which you might be running line by line while you work on it, make sure the script works on a fresh R session. To do this from RStudio:

Ctrl+Shift+F10 to restart the R session running behind the scenes in RStudio.
Ctrl+Shift+Enter to run the whole script

To avoid inefficiently saving and restoring the workspace when closing and opening RStudio, go to Tools > Global Options... > General and:

Uncheck "Restore .RData into workspace at startup"
For "Save Workspace to .RData on exit", select "Never"
Click OK

Similarly, when running R scripts from the command line, specify the --vanilla option to avoid ineffecient saving/restoring of the workspace.

When calling source() within one script to run another script, always specify the argument encoding = "UTF-8". This ensures that code with special characters (e.g., letters with accent marks) will run correctly.

Reproducibility

Use renv to manage the packages used in an RStudio project, avoiding conflicts related to package versioning.

renv::init() will develop a "local library" of the packages employed in a project. It will create the following files and folders in the project directory: renv.lock, .Rprofile, and renv/. Binaries of the project's packages will be stored in the renv/library/ subfolder.
When working on the project, use renv::snapshot() to update your renv-related files. Make sure these are updated when pushing project changes to GitHub, sharing files with others, or preparing the replication package.
When deploying the project on a different machine, make sure that the renv.lock, .Rprofile, and renv/ files/folders are present. The renv/library/ subfolder, containing system-specific package binaries, should be excluded. Once these requirements are met, you can launch the project and run renv::restore() to restore all packages in the new machine, in their appropriate versions.

Version control

GitHub

Github is an important tool to maintain version control and for reproducibility purposes. There are many tutorials online, like Grant Mcdermott's slides here, and I will share some tips from these notes. I will provide instructions for only the most basic commands here.

We need to first create a git repository or clone an existing one.

To clone an existing github repository, use git pull repolink where repolink is the link copied from the repository on Github.
To initialize a new repo, use git init in the project directory

Once you you have initialized a git repository and you make some local changes, you will want to update the Github repository, so that other collaborators can have access to updated files. To do so, we will use the following process:

Check the status: git status. I like to use this frequently, in order to see file you've changed and those you still need to add or commit.
Add files for staging: git add <filename>. Use this to add local changes to the staging area.
Commit: git commit. This command saves your changes to the local repository. It will prompt you to add a commit message, which can be more concisley written as git commit -m "Helpful message"
Push changes to github: assuming there is a Github repository created, use git push origin master to push your saved local changes to the Github repo.

However, there are often times when we encounter merge conflicts. A merge conflict is an event that occurs when Git is unable to automatically resolve differences in code between two commits. For example, if a collaborator edits a piece of code, stages, commits and pushes a change, and you try to push changes for the same piece of code, you will encounter a merge conflict. We need to figure out how fix these conflicts.

I like to start with git status which shows the conflicted files.
If you open up the conflicted files with any text editor, you will see a couple of things.
- <<<<<<< HEAD shows the start of the merge conflict.
- ======= shows the break point used for comparison.
- >>>>>>> <long string> shows the end of merge conflict.
You can now manually edit the code and delete whatever lines of code you don't want and the special chanracters that Git added in the file. After that you can stage, commit and push your files without conflict.

Dropbox

Sometimes RStudio projects don't play nicely with Dropbox syncing because Dropbox is trying to continuously sync the .Rproj.user file while you are editing code. This leads to a frequent pop-up error message "The process cannot access the file because it's being used by another process." To solve this issue on Windows:

Open your .Rproj project in RStudio
Run the function dropbox_project_sync_off() (details)

Linking Github and Dropbox for a project

Here I will present the best methods for linking a project on both Dropbox and Github, which is inspired, but modified from this tutorial). The RA (or whomever is setting up the project) should complete ALL of the following steps. Others need to do only the steps marked with (All). Before going ahead, make sure you have both a Github account, a Dropbox account, and the Dropbox app downloaded on your computer. The main idea of this setup is that our Dropbox will serve as an extra clone where we can share new raw data, but the main version control will be done on Github.

First, establish the Dropbox folder for the project. Create a Dropbox folder, share it with all project members, and let's call the project we are working on "SampleProject". In this step, we aren't doing anything with Github.
The RA will now create a github repo for the project, name it identically to the Dropbox folder and clone it locally to your computer.
(All) Clone the github repo locally by going to terminal. I will clone this in my home directory. To do so, I would type

cd noahforougi
git clone repolink

where repolink is the link copied from the repository page on Github.com. It is important that when you clone this repository, you are doing it in a directory that is not associated with Dropbox.

The next step is to clone the repository again, but this time in the local Dropbox directory. So, for example, say I have cloned the project in this directory /Users/noahforougi/SampleProject/. I will now change the directory to my Dropbox directory and clone the Github repo to the Dropbox.

cd /Dropbox/SampleProject/
git clone repolink

Now, we want to create a more formal project structure. To do so, we are going to edit the Dropbox directly (we will only be doing this once!). Follow the conventions mentioned earlier in this guide, create the project on Dropbox, but *exclude the proc- folder. The dropbox should look something like this:

Dropbox/
- SampleProject/
  - data/
  - documentation/
  - README.md
  - results/
  - scripts/

(All) We want the Dropbox project structure (which the RA has created) on our local repo which is synched with Github(in my case, the /Users/noahforougi/ directory). We will only have to do this once, but we are going to manually copy and paste all the folders into our local repo. Additionally, create a proc/ folder locally. This allows us to share *raw- data via Dropbox, but the *processed- data will be generated by actually running the scripts locally. Our project should look like this:

noahforougi/
- SampleProject/
  - data/
  - proc/
  - documentation/
  - README.md
  - results/
  - scripts/

(All) We want to create a .gitignore file in the local directory. This means when we push our local changes to Github, we are ignoring the data/, proc/ and documentation/ folders. This is crucial because of data confidentiality reasons. There are plenty of tutorials online about how to create a .gitignore file. In the gitignore file please include the following:

/documentation/-
/data/-
/proc/*

Now, go back into the Dropbox folder and repeat this step. We need to create a .gitignore file in the Dropbox as well.

Our project structure is complete. We can now make local edits to the scripts and results and push them to Github. All other project members will be able to receive these changes and update their local proc/ files by running the newly synched scripts. The main interactions should be to push local edits to Github. You should *not- be making edits to the scripts located on the Dropbox. If we want to share new raw data, we will need to copy and paste that locally, but it will not cause issues because of the .gitignore file.

Misc.

Some additional tips:

Error handling: use purrr::possibly() and purrr::safely() rather than base R tryCatch()
Progress bars: for intensive purrr::map*() tasks you can easily add progress bars with dplyr::progress_estimated() (instructions)
If you need to log some printed output, a quick way is sink().

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

README.md

README.md

R Guide

Style

Packages

Folder structure

Scripts structure

Separating scripts

Naming scripts

00_run.R script

Graphing

Saving files

Data sets

Graphs

Randomization

Running scripts

Reproducibility

Version control

GitHub

Dropbox

Linking Github and Dropbox for a project

Misc.

Files

README.md

Latest commit

History

README.md

File metadata and controls

R Guide

Style

Packages

Folder structure

Scripts structure

Separating scripts

Naming scripts

00_run.R script

Graphing

Saving files

Data sets

Graphs

Randomization

Running scripts

Reproducibility

Version control

GitHub

Dropbox

Linking Github and Dropbox for a project

Misc.