diff --git a/docs/gettingstarted/create-parser.md b/docs/create-parser.md similarity index 100% rename from docs/gettingstarted/create-parser.md rename to docs/create-parser.md diff --git a/docs/gettingstarted/getting-started-runtime-configuration.md b/docs/gettingstarted/getting-started-runtime-configuration.md index 5ae63ff3b3..82651a2129 100644 --- a/docs/gettingstarted/getting-started-runtime-configuration.md +++ b/docs/gettingstarted/getting-started-runtime-configuration.md @@ -1,56 +1,62 @@ # Implement a Container Runtime and SC4S -## Prerequisites - -* Linux host with Docker (CE 19.x or greater) or Podman enabled, depending on runtime choice (below). -* A network load balancer (NLB) configured for round-robin. Note: Special consideration may be required when more advanced products are used. -The optimal configuration of the load balancer will round-robin each http POST request (not each connection). -* The host linux OS receive buffer size should be tuned to match the sc4s default to avoid dropping events (packets) at the network level. -The default receive buffer for sc4s is set to 16 MB for UDP traffic, which should be OK for most environments. To set the host OS kernel to -match this, edit `/etc/sysctl.conf` using the following whole-byte values corresponding to 16 MB: +## Step 1: Configure your OS to work with SC4S +### Tune your receive buffer +You must tune the host Linux OS receive buffer size to match the SC4S default. This helps to avoid event dropping at the network level. +The default receive buffer for SC4S is 16 MB for UDP traffic, which should be acceptable for most environments. To set the host OS kernel to +match your buffer: +1. Edit `/etc/sysctl.conf` using the following whole-byte values corresponding to 16 MB: ```bash net.core.rmem_default = 17039360 net.core.rmem_max = 17039360 ``` -and apply to the kernel: + +2. Apply to the kernel: ```bash sysctl -p ``` -* Ensure the kernel is not dropping packets by periodically monitoring the buffer with the command -`netstat -su | grep "receive errors"`. -* NOTE: Failure to account for high-volume traffic (especially UDP) by tuning the kernel will result in message loss, which can be _very_ -unpredictable and difficult to detect. See this helpful discussion in the syslog-ng -[Professional Edition](https://www.syslog-ng.com/technical-documents/doc/syslog-ng-premium-edition/7.0.10/collecting-log-messages-from-udp-sources) -documentation regarding tuning syslog-ng in particular (via the [SC4S_SOURCE_*_SO_RCVBUFF](../configuration.md#syslog-source-configuration) -environment variable in sc4s) as well as overall host kernel tuning. The default values for receive kernel buffers in most distros is 2 MB, -which has proven inadequate for many. -## IPv4 Forwarding +3. To verify that the kernel does not drop packets, periodically monitor the buffer using the command +`netstat -su | grep "receive errors"`. Failure to tune the kernel for high-volume traffic results in message loss, which can be +unpredictable and difficult to detect. The default values for receive kernel buffers in most distributions is 2 MB, +which may not be adequate for your configuration. -In many distributions (e.g. CentOS provisioned in AWS), IPV4 forwarding is _not_ enabled by default. -This needs to be enabled for container networking to function properly. The following is an example -to check and set this up; as usual this needs to be vetted with your enterprise security policy: +### Configure IPv4 forwarding -To check: -```sudo sysctl net.ipv4.ip_forward``` -To set: -```sudo sysctl net.ipv4.ip_forward=1``` +In many distributions, for example CentOS provisioned in AWS, IPv4 forwarding is not enabled by default. +IPv4 forwarding must be enabled for container networking. -To ensure the change survives a reboot: +* To check that IPv4 forwarding is enabled: ```sudo sysctl net.ipv4.ip_forward``` +* To enable IPv4 forwarding: ```sudo sysctl net.ipv4.ip_forward=1``` +* To ensure your changes persist upon reboot: + * Define sysctl settings through files in ```/usr/lib/sysctl.d/```, ```/run/sysctl.d/```, and ```/etc/sysctl.d/```. + * To override only specific settings, either add a file with a lexically later name in ```/etc/sysctl.d/``` and put following setting there or find this specific setting in one of the existing configuration files and set the value to ```1```. -* sysctl settings are defined through files in ```/usr/lib/sysctl.d/```, ```/run/sysctl.d/```, and ```/etc/sysctl.d/```. -* To override only specific settings, you can either add a file with a lexically later name in ```/etc/sysctl.d/``` and put following setting there: ``` net.ipv4.ip_forward=1 ``` -* or find this specific setting in one of existing configuration files (mentioned above) and set value to ```1```. -``` -net.ipv4.ip_forward=1 -``` -## Select a Container Runtime and SC4S Configuration +## Step 2: Create your local directory structure + +Create the following three directories: + +* `/opt/sc4s/local`: This directory is used as a mount point for local overrides and configurations. This empty `local` directory populates with defaults and examples at the first invocation of SC4S for local configurations and context overrides. Do not change the directory structure of these files, as SC4S depends on the directory layout to read the local configurations properly. If necessary, you can change or add individual files. + * In the `local/config/` directory four subdirectories let you provide support for device types +that are not provided out of the box in SC4S. To get started, see the example log path template `lp-example.conf.tmpl` +and a filter `example.conf` in the `log_paths` and `filters` subdirectories. Copy these as templates for your own log path development. + * In the `local/context` directory, change the "non-example" version of a file (e.g. `splunk_metadata.csv`) to preserve the changes +upon restart. +* `/opt/sc4s/archive` is a mount point for local storage of syslog events +if the optional mount is uncommented. The events are written in the syslog-ng EWMM format. See the [Configuration](https://splunk.github.io/splunk-connect-for-syslog/main/configuration/) +topic for information about the directory structure that the archive uses. +* `/opt/sc4s/tls` is a mount point for custom TLS certificates if the optional mount is uncommented. + +When you create these directories, make sure that they match the volume mounts specified in the +sc4s.service [unit file](podman-systemd-general.md#unit-file). Failure to do this will cause SC4S to abort at startup. + +## Step 3: Select a Container Runtime and SC4S Configuration | Container Runtime and Orchestration | Operating Systems | |-------------------------------------------------------------------|-------------------------------------------------------------------------------------| @@ -64,66 +70,3 @@ net.ipv4.ip_forward=1 | [Ansible+Docker Swarm](ansible-docker-swarm.md) | RHEL 8.x or CentOS 8.x (best option), Debian or Ubuntu 18.04LTS | | [Ansible+Podman](ansible-docker-swarm.md) | RHEL 7.x/8.x or CentOS 7.x/8.x (best option), Debian or Ubuntu 20.10LTS(and higher) | | [Ansible+Docker](ansible-docker-swarm.md) | RHEL 7.x/8.x or CentOS 7.x/8.x (best option), Debian or Ubuntu 18.04LTS(and higher) | - - -### Docker and Podman basic configurations -* To run properly sc4s you need to create directories:`/opt/sc4s/local` `/opt/sc4s/archive` `/opt/sc4s/tls` -* `/opt/sc4s/local` will be used as a mount point for local overrides and configurations. -The empty `local` directory created above will populate with defaults and examples at the first invocation -of SC4S for local configurations and context overrides. _Do not_ change the directory structure of -the files that are laid down; change (or add) only individual files if desired. SC4S depends on the directory layout -to read the local configurations properly. See the notes below for which files will be preserved on restarts. -In the `local/config/` directory there are four subdirectories that allow you to provide support for device types -that are not provided out of the box in SC4S. To get you started, there is an example log path template (`lp-example.conf.tmpl`) -and a filter (`example.conf`) in the `log_paths` and `filters` subdirectories, respectively. These should _not_ be used directly, -but copied as templates for your own log path development. They _will_ get overwritten at each SC4S start. -In the `local/context` directory, if you change the "non-example" version of a file (e.g. `splunk_metadata.csv`) the changes -will be preserved on a restart. - -* `/opt/sc4s/archive` will be used as a mount point for local storage of syslog events -(if the optional mount is uncommented above). The events will be written in the syslog-ng EWMM format. See the "configuration" -document for details on the directory structure the archive uses. - -* `/opt/sc4s/tls` will be used as a mount point for custom TLS certificates -(if the optional mount is uncommented above). - -* IMPORTANT: When creating the directories above, ensure the directories created match the volume mounts specified in the -sc4s.service [unit file](podman-systemd-general.md#unit-file). Failure to do this will cause SC4S to abort at startup. - - -#### Dedicated (Unique) Listening Ports - -For certain source technologies, categorization by message content is impossible due to the lack of a unique "fingerprint" in -the data. In other cases, a unique listening port is required for certain devices due to network requirements in the enterprise. -For collection of such sources, we provide a means of dedicating a unique listening port to a specific source. - -Follow this step to configure unique ports for one or more sources: - -* Modify the `/opt/sc4s/env_file` file to include the port-specific environment variable(s). Refer to the ["Sources"](../sources/index.md) -documentation to identify the specific environment variables that are mapped to each data source vendor/technology. - -#### Modify index destinations for Splunk - -Log paths are preconfigured to utilize a convention of index destinations that are suitable for most customers. - -* If changes need to be made to index destinations, navigate to the `/opt/sc4s/local/context` directory to start. -* Edit `splunk_metadata.csv` to review or change the index configuration as required for the data sources utilized in your -environment. The key (1st column) in this file uses the syntax `vendor_product`. Simply replace the index value (the 3rd column) in the -desired row with the index appropriate for your Splunk installation. The "Sources" document details the specific `vendor_product` keys (rows) -in this table that pertain to the individual data source filters that are included with SC4S. -* Other Splunk metadata (e.g. source and sourcetype) can be overridden via this file as well. This is an advanced topic, and further -information is covered in the "Log Path overrides" section of the Configuration document. - -#### Configure source filtering by source IP or host name - -Legacy sources and non-standard-compliant sources require configuration by source IP or hostname as included in the event. The following steps -apply to support such sources. To identify sources that require this step, refer to the "sources" section of this documentation. See documentation -for your vendor/product to determine if specific configuration is required - -#### Configure compliance index/metadata overrides - -In some cases, devices that have been properly sourcetyped need to be further categorized by compliance, geography, or other criterion. -The two files `compliance_meta_by_source.conf` and `compliance_meta_by_source.csv` can be used for this purpose. These operate similarly to -the files above, where the `conf` file specifies a filter to uniquely identify the messages that should be overridden, and the `csv` file -lists one or more metadata items that can be overridden based on the filter name. This is an advanced topic, and further information is -covered in the "Override index or metadata based on host, ip, or subnet" section of the Configuration document. diff --git a/docs/gettingstarted/index.md b/docs/gettingstarted/index.md index ffaaeea6f1..6c29908e04 100644 --- a/docs/gettingstarted/index.md +++ b/docs/gettingstarted/index.md @@ -22,6 +22,6 @@ or resource constraint can cause data to be lost in transmission. ## Implementation +### [Quickstart Guide](quickstart_guide.md) ### [Splunk Setup](getting-started-splunk-setup.md) - ### [Runtime configuration](getting-started-runtime-configuration.md) diff --git a/docs/gettingstarted/quickstart_guide.md b/docs/gettingstarted/quickstart_guide.md index d26c980fe5..b4f0c85475 100644 --- a/docs/gettingstarted/quickstart_guide.md +++ b/docs/gettingstarted/quickstart_guide.md @@ -1,5 +1,7 @@ # Quickstart Guide +This guide will enable you to quickly implement basic changes to your Splunk instance and set up a simple SC4S installation. It's a great starting point for working with SC4S and establishing a minimal operational solution. The same steps are thoroughly described in the [Splunk Setup](getting-started-splunk-setup.md) and [Runtime configuration](getting-started-runtime-configuration.md) sections. + ### Splunk setup 1. Create the following default indexes that are used by SC4S: * `email` diff --git a/mkdocs.yml b/mkdocs.yml index a7d5629e19..54f426b628 100644 --- a/mkdocs.yml +++ b/mkdocs.yml @@ -37,9 +37,9 @@ nav: - Load Balancers: "lb.md" - Getting Started: - Read First: "gettingstarted/index.md" + - Quickstart Guide: "gettingstarted/quickstart_guide.md" - Splunk Setup: "gettingstarted/getting-started-splunk-setup.md" - Runtime Configuration: "gettingstarted/getting-started-runtime-configuration.md" - - Quickstart Guide: "gettingstarted/quickstart_guide.md" - Select Runtime: - Podman + systemd: "gettingstarted/podman-systemd-general.md" - Docker CE + systemd: "gettingstarted/docker-systemd-general.md" @@ -52,7 +52,7 @@ nav: - Docker Swarm: "gettingstarted/ansible-docker-swarm.md" - Podman/Docker: "gettingstarted/ansible-docker-podman.md" - mk8s: "gettingstarted/ansible-mk8s.md" - - Create a parser: "gettingstarted/create-parser.md" + - Create a parser: "create-parser.md" - Configuration: "configuration.md" - Destinations: "destinations.md" - Sources: