From c4bcb336a87d593ad84b70a49c6820f1803a55bd Mon Sep 17 00:00:00 2001
From: suchmememanyskill <38142618+suchmememanyskill@users.noreply.github.com>
Date: Fri, 27 Oct 2023 16:12:25 +0200
Subject: [PATCH] Bump version

---
 PrusaSlicer/filament/PETG 230C 70C.ini              | 2 +-
 PrusaSlicer/filament/PETG 240C 75C.ini              | 2 +-
 PrusaSlicer/filament/PETG CLEAR 240C 70C.ini        | 2 +-
 PrusaSlicer/filament/PLA 200C 60C.ini               | 2 +-
 PrusaSlicer/filament/PLA 210C 60C.ini               | 2 +-
 PrusaSlicer/filament/PLA 220C 60C.ini               | 2 +-
 PrusaSlicer/print/Fast 0.20mm @ Ender 3 V3 SE.ini   | 2 +-
 PrusaSlicer/print/Fast 0.24mm @ Ender 3 V3 SE.ini   | 2 +-
 PrusaSlicer/print/Normal 0.16mm @ Ender 3 V3 SE.ini | 2 +-
 PrusaSlicer/print/Normal 0.20mm @ Ender 3 V3 SE.ini | 2 +-
 PrusaSlicer/print/Normal 0.24mm @ Ender 3 V3 SE.ini | 2 +-
 PrusaSlicer/print/Slow 0.10mm @ Ender 3 V3 SE.ini   | 2 +-
 PrusaSlicer/print/Slow 0.16mm @ Ender 3 V3 SE.ini   | 2 +-
 PrusaSlicer/print/Slow 0.20mm @ Ender 3 V3 SE.ini   | 2 +-
 PrusaSlicer/printer/Ender 3 V3 SE (Klipper).ini     | 2 +-
 PrusaSlicer/printer/Ender 3 V3 SE.ini               | 2 +-
 16 files changed, 16 insertions(+), 16 deletions(-)

diff --git a/PrusaSlicer/filament/PETG 230C 70C.ini b/PrusaSlicer/filament/PETG 230C 70C.ini
index c7b35d8..b890062 100644
--- a/PrusaSlicer/filament/PETG 230C 70C.ini	
+++ b/PrusaSlicer/filament/PETG 230C 70C.ini	
@@ -28,7 +28,7 @@ filament_minimal_purge_on_wipe_tower = 15
 filament_multitool_ramming = 0
 filament_multitool_ramming_flow = 10
 filament_multitool_ramming_volume = 10
-filament_notes = v1.1.0
+filament_notes = v1.1.1
 filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
 filament_retract_before_travel = nil
 filament_retract_before_wipe = nil
diff --git a/PrusaSlicer/filament/PETG 240C 75C.ini b/PrusaSlicer/filament/PETG 240C 75C.ini
index b597794..afc39a4 100644
--- a/PrusaSlicer/filament/PETG 240C 75C.ini	
+++ b/PrusaSlicer/filament/PETG 240C 75C.ini	
@@ -28,7 +28,7 @@ filament_minimal_purge_on_wipe_tower = 15
 filament_multitool_ramming = 0
 filament_multitool_ramming_flow = 10
 filament_multitool_ramming_volume = 10
-filament_notes = v1.1.0
+filament_notes = v1.1.1
 filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
 filament_retract_before_travel = nil
 filament_retract_before_wipe = nil
diff --git a/PrusaSlicer/filament/PETG CLEAR 240C 70C.ini b/PrusaSlicer/filament/PETG CLEAR 240C 70C.ini
index ab5f63b..a91b63c 100644
--- a/PrusaSlicer/filament/PETG CLEAR 240C 70C.ini	
+++ b/PrusaSlicer/filament/PETG CLEAR 240C 70C.ini	
@@ -28,7 +28,7 @@ filament_minimal_purge_on_wipe_tower = 15
 filament_multitool_ramming = 0
 filament_multitool_ramming_flow = 10
 filament_multitool_ramming_volume = 10
-filament_notes = v1.1.0
+filament_notes = v1.1.1
 filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
 filament_retract_before_travel = nil
 filament_retract_before_wipe = nil
diff --git a/PrusaSlicer/filament/PLA 200C 60C.ini b/PrusaSlicer/filament/PLA 200C 60C.ini
index f1d41ee..4b7da4b 100644
--- a/PrusaSlicer/filament/PLA 200C 60C.ini	
+++ b/PrusaSlicer/filament/PLA 200C 60C.ini	
@@ -28,7 +28,7 @@ filament_minimal_purge_on_wipe_tower = 15
 filament_multitool_ramming = 0
 filament_multitool_ramming_flow = 10
 filament_multitool_ramming_volume = 10
-filament_notes = v1.1.0
+filament_notes = v1.1.1
 filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
 filament_retract_before_travel = nil
 filament_retract_before_wipe = nil
diff --git a/PrusaSlicer/filament/PLA 210C 60C.ini b/PrusaSlicer/filament/PLA 210C 60C.ini
index 485ccd7..e14df0b 100644
--- a/PrusaSlicer/filament/PLA 210C 60C.ini	
+++ b/PrusaSlicer/filament/PLA 210C 60C.ini	
@@ -28,7 +28,7 @@ filament_minimal_purge_on_wipe_tower = 15
 filament_multitool_ramming = 0
 filament_multitool_ramming_flow = 10
 filament_multitool_ramming_volume = 10
-filament_notes = v1.1.0
+filament_notes = v1.1.1
 filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
 filament_retract_before_travel = nil
 filament_retract_before_wipe = nil
diff --git a/PrusaSlicer/filament/PLA 220C 60C.ini b/PrusaSlicer/filament/PLA 220C 60C.ini
index ae960d1..59c07ad 100644
--- a/PrusaSlicer/filament/PLA 220C 60C.ini	
+++ b/PrusaSlicer/filament/PLA 220C 60C.ini	
@@ -28,7 +28,7 @@ filament_minimal_purge_on_wipe_tower = 15
 filament_multitool_ramming = 0
 filament_multitool_ramming_flow = 10
 filament_multitool_ramming_volume = 10
-filament_notes = v1.1.0
+filament_notes = v1.1.1
 filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
 filament_retract_before_travel = nil
 filament_retract_before_wipe = nil
diff --git a/PrusaSlicer/print/Fast 0.20mm @ Ender 3 V3 SE.ini b/PrusaSlicer/print/Fast 0.20mm @ Ender 3 V3 SE.ini
index fa8beb1..8642654 100644
--- a/PrusaSlicer/print/Fast 0.20mm @ Ender 3 V3 SE.ini	
+++ b/PrusaSlicer/print/Fast 0.20mm @ Ender 3 V3 SE.ini	
@@ -73,7 +73,7 @@ min_feature_size = 25%
 min_skirt_length = 4
 mmu_segmented_region_interlocking_depth = 0
 mmu_segmented_region_max_width = 0
-notes = v1.1.0
+notes = v1.1.1
 only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
 output_filename_format = {input_filename_base}_{print_time}_{digits(layer_height,1,2)}mm_{temperature[0]}C_{filament_type[0]}_{printer_model}.gcode
diff --git a/PrusaSlicer/print/Fast 0.24mm @ Ender 3 V3 SE.ini b/PrusaSlicer/print/Fast 0.24mm @ Ender 3 V3 SE.ini
index fa7fc7e..748a5cc 100644
--- a/PrusaSlicer/print/Fast 0.24mm @ Ender 3 V3 SE.ini	
+++ b/PrusaSlicer/print/Fast 0.24mm @ Ender 3 V3 SE.ini	
@@ -73,7 +73,7 @@ min_feature_size = 25%
 min_skirt_length = 4
 mmu_segmented_region_interlocking_depth = 0
 mmu_segmented_region_max_width = 0
-notes = v1.1.0
+notes = v1.1.1
 only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
 output_filename_format = {input_filename_base}_{print_time}_{digits(layer_height,1,2)}mm_{temperature[0]}C_{filament_type[0]}_{printer_model}.gcode
diff --git a/PrusaSlicer/print/Normal 0.16mm @ Ender 3 V3 SE.ini b/PrusaSlicer/print/Normal 0.16mm @ Ender 3 V3 SE.ini
index 4a4ea56..d2b72ab 100644
--- a/PrusaSlicer/print/Normal 0.16mm @ Ender 3 V3 SE.ini	
+++ b/PrusaSlicer/print/Normal 0.16mm @ Ender 3 V3 SE.ini	
@@ -73,7 +73,7 @@ min_feature_size = 25%
 min_skirt_length = 4
 mmu_segmented_region_interlocking_depth = 0
 mmu_segmented_region_max_width = 0
-notes = v1.1.0
+notes = v1.1.1
 only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
 output_filename_format = {input_filename_base}_{print_time}_{digits(layer_height,1,2)}mm_{temperature[0]}C_{filament_type[0]}_{printer_model}.gcode
diff --git a/PrusaSlicer/print/Normal 0.20mm @ Ender 3 V3 SE.ini b/PrusaSlicer/print/Normal 0.20mm @ Ender 3 V3 SE.ini
index 975efc4..22b772f 100644
--- a/PrusaSlicer/print/Normal 0.20mm @ Ender 3 V3 SE.ini	
+++ b/PrusaSlicer/print/Normal 0.20mm @ Ender 3 V3 SE.ini	
@@ -73,7 +73,7 @@ min_feature_size = 25%
 min_skirt_length = 4
 mmu_segmented_region_interlocking_depth = 0
 mmu_segmented_region_max_width = 0
-notes = v1.1.0
+notes = v1.1.1
 only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
 output_filename_format = {input_filename_base}_{print_time}_{digits(layer_height,1,2)}mm_{temperature[0]}C_{filament_type[0]}_{printer_model}.gcode
diff --git a/PrusaSlicer/print/Normal 0.24mm @ Ender 3 V3 SE.ini b/PrusaSlicer/print/Normal 0.24mm @ Ender 3 V3 SE.ini
index 0b03549..a2788b6 100644
--- a/PrusaSlicer/print/Normal 0.24mm @ Ender 3 V3 SE.ini	
+++ b/PrusaSlicer/print/Normal 0.24mm @ Ender 3 V3 SE.ini	
@@ -73,7 +73,7 @@ min_feature_size = 25%
 min_skirt_length = 4
 mmu_segmented_region_interlocking_depth = 0
 mmu_segmented_region_max_width = 0
-notes = v1.1.0
+notes = v1.1.1
 only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
 output_filename_format = {input_filename_base}_{print_time}_{digits(layer_height,1,2)}mm_{temperature[0]}C_{filament_type[0]}_{printer_model}.gcode
diff --git a/PrusaSlicer/print/Slow 0.10mm @ Ender 3 V3 SE.ini b/PrusaSlicer/print/Slow 0.10mm @ Ender 3 V3 SE.ini
index e648b36..81e391a 100644
--- a/PrusaSlicer/print/Slow 0.10mm @ Ender 3 V3 SE.ini	
+++ b/PrusaSlicer/print/Slow 0.10mm @ Ender 3 V3 SE.ini	
@@ -73,7 +73,7 @@ min_feature_size = 25%
 min_skirt_length = 4
 mmu_segmented_region_interlocking_depth = 0
 mmu_segmented_region_max_width = 0
-notes = v1.1.0
+notes = v1.1.1
 only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
 output_filename_format = {input_filename_base}_{print_time}_{digits(layer_height,1,2)}mm_{temperature[0]}C_{filament_type[0]}_{printer_model}.gcode
diff --git a/PrusaSlicer/print/Slow 0.16mm @ Ender 3 V3 SE.ini b/PrusaSlicer/print/Slow 0.16mm @ Ender 3 V3 SE.ini
index 1e8f453..1dae450 100644
--- a/PrusaSlicer/print/Slow 0.16mm @ Ender 3 V3 SE.ini	
+++ b/PrusaSlicer/print/Slow 0.16mm @ Ender 3 V3 SE.ini	
@@ -73,7 +73,7 @@ min_feature_size = 25%
 min_skirt_length = 4
 mmu_segmented_region_interlocking_depth = 0
 mmu_segmented_region_max_width = 0
-notes = v1.1.0
+notes = v1.1.1
 only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
 output_filename_format = {input_filename_base}_{print_time}_{digits(layer_height,1,2)}mm_{temperature[0]}C_{filament_type[0]}_{printer_model}.gcode
diff --git a/PrusaSlicer/print/Slow 0.20mm @ Ender 3 V3 SE.ini b/PrusaSlicer/print/Slow 0.20mm @ Ender 3 V3 SE.ini
index 4cfd9e1..35dfbd9 100644
--- a/PrusaSlicer/print/Slow 0.20mm @ Ender 3 V3 SE.ini	
+++ b/PrusaSlicer/print/Slow 0.20mm @ Ender 3 V3 SE.ini	
@@ -73,7 +73,7 @@ min_feature_size = 25%
 min_skirt_length = 4
 mmu_segmented_region_interlocking_depth = 0
 mmu_segmented_region_max_width = 0
-notes = v1.1.0
+notes = v1.1.1
 only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
 output_filename_format = {input_filename_base}_{print_time}_{digits(layer_height,1,2)}mm_{temperature[0]}C_{filament_type[0]}_{printer_model}.gcode
diff --git a/PrusaSlicer/printer/Ender 3 V3 SE (Klipper).ini b/PrusaSlicer/printer/Ender 3 V3 SE (Klipper).ini
index 2be80a2..66bbf23 100644
--- a/PrusaSlicer/printer/Ender 3 V3 SE (Klipper).ini	
+++ b/PrusaSlicer/printer/Ender 3 V3 SE (Klipper).ini	
@@ -46,7 +46,7 @@ parking_pos_retraction = 92
 pause_print_gcode = M600
 print_host = 
 printer_model = 
-printer_notes = v1.1.0
+printer_notes = v1.1.1
 printer_settings_id = 
 printer_technology = FFF
 printer_variant = 
diff --git a/PrusaSlicer/printer/Ender 3 V3 SE.ini b/PrusaSlicer/printer/Ender 3 V3 SE.ini
index ff4252b..e959d0d 100644
--- a/PrusaSlicer/printer/Ender 3 V3 SE.ini	
+++ b/PrusaSlicer/printer/Ender 3 V3 SE.ini	
@@ -46,7 +46,7 @@ parking_pos_retraction = 92
 pause_print_gcode = M600
 print_host = 
 printer_model = 
-printer_notes = v1.1.0
+printer_notes = v1.1.1
 printer_settings_id = 
 printer_technology = FFF
 printer_variant =