yaml_manual_examples.md

Alternative FIMP integrations

Here are examples on how to add Wall plugs and sensors manually in configuration.yaml, using MQTT without the use of this addon.

Wall plug (Fibaro)

Replace '34' with the address for the device in Futurehome.

mqtt:
  #
  # Kontor
  #
  # Wall plug
  switch:
    - name: "Wall plug (kontor)"
      state_topic:   "pt:j1/mt:evt/rt:dev/rn:zw/ad:1/sv:out_bin_switch/ad:34_0"
      command_topic: "pt:j1/mt:cmd/rt:dev/rn:zw/ad:1/sv:out_bin_switch/ad:34_0"
      value_template: '{{ value_json.val }}'
      payload_on:  '{"props":{},"serv":"out_bin_switch","tags":[],"type":"cmd.binary.set","val":true,"val_t":"bool"}'
      payload_off: '{"props":{},"serv":"out_bin_switch","tags":[],"type":"cmd.binary.set","val":false,"val_t":"bool"}'
      state_on: true
      state_off: false

Multi Sensor (Fibaro)

Replace '37' with the address for the device in Futurehome.

mqtt:
  # Fibaro Eye
  sensor:
    - name: "Batteri Kontor"
      state_topic: "pt:j1/mt:evt/rt:dev/rn:zw/ad:1/sv:battery/ad:37_0"
      unit_of_measurement: '%'
      value_template: "{{ value_json.val }}"

    - name: "Bevegelse Kontor"
      state_topic: "pt:j1/mt:evt/rt:dev/rn:zw/ad:1/sv:sensor_presence/ad:37_0"
      value_template: "{{ value_json.val }}"

    - name: "Temperatur Kontor"
      state_topic: "pt:j1/mt:evt/rt:dev/rn:zw/ad:1/sv:sensor_temp/ad:37_0"
      unit_of_measurement: '°C'
      value_template: "{{ value_json.val }}"

    - name: "Lysstyrke Kontor"
      state_topic: "pt:j1/mt:evt/rt:dev/rn:zw/ad:1/sv:sensor_lumin/ad:37_0"
      unit_of_measurement: 'Lux'
      value_template: "{{ value_json.val }}"