XFL Fuse panels problem

[sukasiaka]

Hi there,

I'm trying to add the XFL fuselage. It seems to work with surface, but I can't see the panels.
any advice?

[techwinder]

My guess is that you tried to use gmsh, but it failed due to the canard configuration. The fuselage should intersect the whole wing in the chordwise direction even if it meand extending the fuselage in the negative x-driection. I tried to explain this in the tutorial videos.

You can also try the option "fuselage/restore geometry and mesh" in the plane editor, then use in conjunction with "thin surface assembly".

[sukasiaka]

Even I can't create a fuse NURBS type with the panels. The surface appears fine, but the panels are incorrect from the beginning. I haven't changed anything; everything is still set to default.

[techwinder]

The fuselage mesh looks very coarse. Please try to increase the number of panels in the longitudinal and hoop directions.
You can also try to run gmsh int he "fuselage mesh " tab with a smaller minimum panel size.
If neither of these options work, please share the project file and I'll have a look.

[sukasiaka]

Sorry, no luck. This is the default project with no modifications. The fuse is already very coarse as it comes.
https://drive.google.com/file/d/1q86NcqNUXiLDy-7s1rFow-xkj4DtLIu4/view?usp=sharing

[techwinder]

In the fuse editor, move the bunching slider in the quad panels box.
or
Use gmsh in the plane editor.
Will fix this in the next version.

[sukasiaka]

Thank you in advance!

[techwinder]

Not sure how this came to be in the first place, so can't fix it right now.
I'll keep the issue opened in case it pops up again.

[sukasiaka]

I’m not sure what happened, but the program started working correctly.
My apologies.