deploy-on-aws-eks.md

title	summary	category
Deploy TiDB on AWS EKS	Learn how to deploy a TiDB cluster on AWS EKS.	how-to

Deploy TiDB on AWS EKS

This document describes how to deploy a TiDB cluster on AWS EKS with your laptop (Linux or macOS) for development or testing.

Prerequisites

Before deploying a TiDB cluster on AWS EKS, make sure the following requirements are satisfied:

• awscli >= 1.16.73, to control AWS resources

  You must configure awscli before it can interact with AWS. The fastest way is using the aws configure command:

  {{< copyable "shell-regular" >}}

  aws configure

  Replace AWS Access Key ID and AWS Secret Access Key with your own keys:

  AWS Access Key ID [None]: AKIAIOSFODNN7EXAMPLE
  AWS Secret Access Key [None]: wJalrXUtnFEMI/K7MDENG/bPxRfiCYEXAMPLEKEY
  Default region name [None]: us-west-2
  Default output format [None]: json
  

  Note:

  The access key must have at least permissions to: create VPC, create EBS, create EC2 and create role.

• terraform >= 0.12

• kubectl >= 1.12

• helm >= 2.11.0 && < 3.0.0 && != 2.16.4

• jq

• aws-iam-authenticator installed in PATH, to authenticate with AWS

  The easiest way to install aws-iam-authenticator is to download the prebuilt binary as shown below:

  Download the binary for Linux:

  {{< copyable "shell-regular" >}}

  curl -o aws-iam-authenticator https://amazon-eks.s3-us-west-2.amazonaws.com/1.12.7/2019-03-27/bin/linux/amd64/aws-iam-authenticator

  Or, download binary for macOS:

  {{< copyable "shell-regular" >}}

  curl -o aws-iam-authenticator https://amazon-eks.s3-us-west-2.amazonaws.com/1.12.7/2019-03-27/bin/darwin/amd64/aws-iam-authenticator

  Then execute the following commands:

  {{< copyable "shell-regular" >}}

  chmod +x ./aws-iam-authenticator && \
  sudo mv ./aws-iam-authenticator /usr/local/bin/aws-iam-authenticator

Deploy

This section describes how to deploy EKS, TiDB operator, TiDB cluster and monitor.

Deploy EKS, TiDB Operator, and TiDB cluster node pool

Use the following commands to deploy EKS, TiDB Operator, and the TiDB cluster node pool.

Get the code from Github:

{{< copyable "shell-regular" >}}

git clone --depth=1 https://github.com/pingcap/tidb-operator && \
cd tidb-operator/deploy/aws

The default setup creates a new VPC and a t2.micro instance as the bastion machine, and an EKS cluster with following Amazon EC2 instances as worker nodes:

• 3 m5.xlarge instances for PD
• 3 c5d.4xlarge instances for TiKV
• 2 c5.4xlarge instances for TiDB
• 1 c5.2xlarge instance for monitor

You can create or modify terraform.tfvars to set the value of variables and configure the cluster as needed. See the variables that can be set and their descriptions in variables.tf.

The following is an example of how to configure the EKS cluster name, the TiDB cluster name, the TiDB Operator version, and the number of PD, TiKV and TiDB nodes:

default_cluster_pd_count   = 3
default_cluster_tikv_count = 3
default_cluster_tidb_count = 2
default_cluster_name = "tidb"
eks_name = "my-cluster"
operator_version = "v1.1.0-rc.1"

If you need to deploy TiFlash in the cluster, set create_tiflash_node_pool = true in terraform.tfvars. You can also configure the node count and instance type of the TiFlash node pool by modifying cluster_tiflash_count and cluster_tiflash_instance_type. By default, the value of cluster_tiflash_count is 2, and the value of cluster_tiflash_instance_type is i3.4xlarge.

Note:

Check the operator_version in the variables.tf file for the default TiDB Operator version of the current scripts. If the default version is not your desired one, configure operator_version in terraform.tfvars.

After configuration, execute the terraform command to initialize and deploy the cluster:

{{< copyable "shell-regular" >}}

terraform init

{{< copyable "shell-regular" >}}

terraform apply

It might take 10 minutes or more to finish the process. After terraform apply is executed successfully, some useful information is printed to the console.

A successful deployment will give the output like:

Apply complete! Resources: 67 added, 0 changed, 0 destroyed.

Outputs:

bastion_ip = [
  "34.219.204.217",
]
default-cluster_monitor-dns = not_created
default-cluster_tidb-dns = not_created
eks_endpoint = https://9A9A5ABB8303DDD35C0C2835A1801723.yl4.us-west-2.eks.amazonaws.com
eks_version = 1.12
kubeconfig_filename = credentials/kubeconfig_my-cluster
region = us-west-2

You can use the terraform output command to get the output again.

Note:

EKS versions earlier than 1.14 do not support auto enabling cross-zone load balancing via Network Load Balancer (NLB). Therefore, unbalanced pressure distributed among TiDB instances can be expected in default settings. It is strongly recommended that you refer to AWS Documentation to manually enable cross-zone load balancing for a production environment.

Deploy TiDB cluster and monitor

1. Prepare the TidbCluster and TidbMonitor CR files:

   {{< copyable "shell-regular" >}}

   cp manifests/db.yaml.example db.yaml && cp manifests/db-monitor.yaml.example db-monitor.yaml

   To complete the CR file configuration, refer to API documentation and Configure a TiDB Cluster Using TidbCluster.

   To deploy TiFlash, configure spec.tiflash in db.yaml as follows:

   spec:
     ...
     tiflash:
       baseImage: pingcap/tiflash
       maxFailoverCount: 3
       nodeSelector:
         dedicated: CLUSTER_NAME-tiflash
       replicas: 1
       storageClaims:
       - resources:
           requests:
             storage: 100Gi
         storageClassName: local-storage
       tolerations:
       - effect: NoSchedule
         key: dedicated
         operator: Equal
         value: CLUSTER_NAME-tiflash

   Modify replicas, storageClaims[].resources.requests.storage, and storageClassName according to your needs.

   Note:

   • Replace all CLUSTER_NAME in db.yaml and db-monitor.yaml files with default_cluster_name configured during EKS deployment.
   • Make sure that during EKS deployment, the number of PD, TiKV, TiFlash, or TiDB nodes is >= the value of the replicas field of the corresponding component in db.yaml.
   • Make sure that spec.initializer.version in db-monitor.yaml and spec.version in db.yaml are the same to ensure normal monitor display.

2. Create Namespace:

   {{< copyable "shell-regular" >}}

   kubectl --kubeconfig credentials/kubeconfig_${eks_name} create namespace ${namespace}

   Note:

   A namespace is a virtual cluster backed by the same physical cluster. You can give it a name that is easy to memorize, such as the same name as default_cluster_name.

3. Deploy the TiDB cluster:

   {{< copyable "shell-regular" >}}

   kubectl --kubeconfig credentials/kubeconfig_${eks_name} create -f db.yaml -n ${namespace} &&
   kubectl --kubeconfig credentials/kubeconfig_${eks_name} create -f db-monitor.yaml -n ${namespace}

Enable cross-zone load balancing for the LoadBalancer of the TiDB service

Due to an issue of AWS Network Load Balancer (NLB), the NLB created for the TiDB service cannot automatically enable cross-zone load balancing. You can manually enable it by taking the following steps:

1. Get the name of the NLB created for the TiDB service:

   {{< copyable "shell-regular" >}}

   kubectl --kubeconfig credentials/kubeconfig_${eks_name} get svc ${default_cluster_name}-tidb -n ${namespace}

   This is an example of the output:

   kubectl --kubeconfig credentials/kubeconfig_test get svc test-tidb -n test
   NAME        TYPE           CLUSTER-IP      EXTERNAL-IP                                                                     PORT(S)                          AGE
   tidb-tidb   LoadBalancer   172.20.39.180   a7aa544c49f914930b3b0532022e7d3c-83c0c97d8b659075.elb.us-west-2.amazonaws.com   4000:32387/TCP,10080:31486/TCP   3m46s
   

   In the value of the EXTERNAL-IP field, the first field that is separated by - is the name of NLB. In the example above, the NLB name is a7aa544c49f914930b3b0532022e7d3c.

2. Get the LoadBalancerArn for the NLB:

   {{< copyable "shell-regular" >}}

   aws elbv2 describe-load-balancers | grep ${LoadBalancerName}

   ${LoadBalancerName} is the NLB name obtained in Step 1.

   This is an example of the output:

   aws elbv2 describe-load-balancers | grep a7aa544c49f914930b3b0532022e7d3c
             "LoadBalancerArn": "arn:aws:elasticloadbalancing:us-west-2:687123456789:loadbalancer/net/a7aa544c49f914930b3b0532022e7d3c/83c0c97d8b659075",
             "DNSName": "a7aa544c49f914930b3b0532022e7d3c-83c0c97d8b659075.elb.us-west-2.amazonaws.com",
             "LoadBalancerName": "a7aa544c49f914930b3b0532022e7d3c",
   

   The value of the LoadBalancerArn field is the NLB LoadBalancerArn.

3. View the NLB attributes:

   {{< copyable "shell-regular" >}}

   aws elbv2 describe-load-balancer-attributes --load-balancer-arn ${LoadBalancerArn}

   ${LoadBalancerArn} is the NLB LoadBalancerArn obtained in Step 2.

   This is an example of the output:

   aws elbv2 describe-load-balancer-attributes --load-balancer-arn "arn:aws:elasticloadbalancing:us-west-2:687123456789:loadbalancer/net/a7aa544c49f914930b3b0532022e7d3c/83c0c97d8b659075"
   {
     "Attributes": [
         {
             "Key": "access_logs.s3.enabled",
             "Value": "false"
         },
         {
             "Key": "load_balancing.cross_zone.enabled",
             "Value": "false"
         },
         {
             "Key": "access_logs.s3.prefix",
             "Value": ""
         },
         {
             "Key": "deletion_protection.enabled",
             "Value": "false"
         },
         {
             "Key": "access_logs.s3.bucket",
             "Value": ""
         }
     ]
   }
   

   If the value of load_balancing.cross_zone.enabled is false, continue the next step to enable cross-zone load balancing.

4. Enable cross-zone load balancing for NLB:

   {{< copyable "shell-regular" >}}

   aws elbv2 modify-load-balancer-attributes --load-balancer-arn ${LoadBalancerArn} --attributes Key=load_balancing.cross_zone.enabled,Value=true

   ${LoadBalancerArn} is the NLB LoadBalancerArn obtained in Step 2.

   This is an example of the output:

   aws elbv2 modify-load-balancer-attributes --load-balancer-arn "arn:aws:elasticloadbalancing:us-west-2:687123456789:loadbalancer/net/a7aa544c49f914930b3b0532022e7d3c/83c0c97d8b659075" --attributes Key=load_balancing.cross_zone.enabled,Value=true
   {
     "Attributes": [
         {
             "Key": "load_balancing.cross_zone.enabled",
             "Value": "true"
         },
         {
             "Key": "access_logs.s3.enabled",
             "Value": "false"
         },
         {
             "Key": "access_logs.s3.prefix",
             "Value": ""
         },
         {
             "Key": "deletion_protection.enabled",
             "Value": "false"
         },
         {
             "Key": "access_logs.s3.bucket",
             "Value": ""
         }
     ]
   }
   

5. Confirm that the NLB cross-zone load balancing attribute is enabled:

   {{< copyable "shell-regular" >}}

   aws elbv2 describe-load-balancer-attributes --load-balancer-arn ${LoadBalancerArn}

   ${LoadBalancerArn} is the NLB LoadBalancerArn obtained in Step 2.

   This is an example of the output:

   aws elbv2 describe-load-balancer-attributes --load-balancer-arn "arn:aws:elasticloadbalancing:us-west-2:687123456789:loadbalancer/net/a7aa544c49f914930b3b0532022e7d3c/83c0c97d8b659075"
   {
     "Attributes": [
         {
             "Key": "access_logs.s3.enabled",
             "Value": "false"
         },
         {
             "Key": "load_balancing.cross_zone.enabled",
             "Value": "true"
         },
         {
             "Key": "access_logs.s3.prefix",
             "Value": ""
         },
         {
             "Key": "deletion_protection.enabled",
             "Value": "false"
         },
         {
             "Key": "access_logs.s3.bucket",
             "Value": ""
         }
     ]
   }
   

   Confirm that the value of load_balancing.cross_zone.enabled is true.

Access the database

After deploying the cluster, to access the deployed TiDB cluster, use the following commands to first ssh into the bastion machine, and then connect it via MySQL client (replace the ${} parts with values from the output):

{{< copyable "shell-regular" >}}

ssh -i credentials/${eks_name}.pem centos@${bastion_ip}

{{< copyable "shell-regular" >}}

mysql -h ${tidb_lb} -P 4000 -u root

The default value of eks_name is my-cluster. If the DNS name is not resolvable, be patient and wait a few minutes.

tidb_lb is the LoadBalancer of TiDB Service. To check this value, run kubectl --kubeconfig credentials/kubeconfig_${eks_name} get svc ${default_cluster_name}-tidb -n ${namespace} and view the EXTERNAL-IP field in the output information.

You can interact with the EKS cluster using kubectl and helm with the kubeconfig file credentials/kubeconfig_${eks_name} in the following two ways.

• By specifying --kubeconfig argument:

  {{< copyable "shell-regular" >}}

  kubectl --kubeconfig credentials/kubeconfig_${eks_name} get po -n ${namespace}

  {{< copyable "shell-regular" >}}

  helm --kubeconfig credentials/kubeconfig_${eks_name} ls

• Or by setting the KUBECONFIG environment variable:

  {{< copyable "shell-regular" >}}

  export KUBECONFIG=$PWD/credentials/kubeconfig_${eks_name}

  {{< copyable "shell-regular" >}}

  kubectl get po -n ${namespace}

  {{< copyable "shell-regular" >}}

  helm ls

Monitor

You can access the <monitor-lb>:3000 address (printed in outputs) using your web browser to view monitoring metrics.

monitor-lb is the LoadBalancer of the cluster Monitor Service. To check this value, run kubectl --kubeconfig credentials/kubeconfig_${eks_name} get svc ${default_cluster_name}-grafana -n ${namespace} and view the EXTERNAL-IP field in the output information.

The initial Grafana login credentials are:

• User: admin
• Password: admin

Upgrade

To upgrade the TiDB cluster, edit the spec.version by kubectl --kubeconfig credentials/kubeconfig_${eks_name} edit tc ${default_cluster_name} -n ${namespace}.

The upgrading doesn't finish immediately. You can watch the upgrading progress by kubectl --kubeconfig credentials/kubeconfig_${eks_name} get po -n ${namespace} --watch.

Scale

To scale out the TiDB cluster, modify the default_cluster_tikv_count, cluster_tiflash_count, or default_cluster_tidb_count variable in the terraform.tfvars file to your desired count, and then run terraform apply to scale out the number of the corresponding component nodes.

After the scaling, modify the replicas of the corresponding component by the following command:

{{< copyable "shell-regular" >}}

kubectl --kubeconfig credentials/kubeconfig_${eks_name} edit tc ${default_cluster_name} -n ${namespace}

For example, to scale out the TiDB nodes, you can modify the number of TiDB instances from 2 to 4:

default_cluster_tidb_count = 4

After the nodes scale out, modify the spec.tidb.replicas in TidbCluster to scale out the Pod.

Note:

Currently, scaling in is NOT supported because we cannot determine which node to scale in. Scaling out needs a few minutes to complete, you can watch the scaling out progress by kubectl --kubeconfig credentials/kubeconfig_${eks_name} get po -n ${namespace} --watch.

Customize

This section describes how to customize the AWS related resources and TiDB Operator.

Customize AWS related resources

An Amazon EC2 instance is also created by default as the bastion machine to connect to the created TiDB cluster. This is because the TiDB service is exposed as an Internal Elastic Load Balancer. The EC2 instance has MySQL and Sysbench pre-installed, so you can use SSH to log into the EC2 instance and connect to TiDB using the ELB endpoint. You can disable the bastion instance creation by setting create_bastion to false if you already have an EC2 instance in the VPC.

Customize TiDB Operator

To customize the TiDB Operator, modify the operator_values parameter in terraform.tfvars to pass the customized contents of values.yaml. For example:

operator_values = "./operator_values.yaml"

Manage multiple TiDB clusters

An instance of tidb-cluster module corresponds to a TiDB cluster in the EKS cluster. If you want to create a node pool for a new TiDB cluster, edit ./cluster.tf and add a new instance of tidb-cluster module:

module example-cluster {
  source = "../modules/aws/tidb-cluster"
  eks = local.eks
  subnets = local.subnets
  region = var.region
  cluster_name    = "example"
  ssh_key_name                  = module.key-pair.key_name
  pd_count                      = 1
  pd_instance_type              = "c5.large"
  tikv_count                    = 1
  tikv_instance_type            = "c5d.large"
  tidb_count                    = 1
  tidb_instance_type            = "c4.large"
  monitor_instance_type         = "c5.large"
  create_tidb_cluster_release   = false
}

Note:

The cluster_name of each cluster must be unique.

When you finish the modification, execute terraform init and terraform apply to create the nodes pool for the TiDB cluster.

Finally, deploy TiDB cluster and monitor.

Destroy clusters

1. Destroy the TiDB clusters.

2. Destroy the EKS cluster by the following command:

   {{< copyable "shell-regular" >}}

   terraform destroy

   If the following error occurs during terraform destroy:

   Error: Get http://localhost/apis/apps/v1/namespaces/kube-system/deployments/tiller-deploy: dial tcp [::1]:80: connect: connection refused
   

   Run the following command:

   {{< copyable "shell-regular" >}}

   terraform state rm module.tidb-operator.helm_release.tidb-operator

   And then run terraform destroy again.

Note:

• This will destroy your EKS cluster.
• If you do not need the data on the volumes anymore, you have to manually delete the EBS volumes in AWS console after running terraform destroy.

Manage multiple Kubernetes clusters

This section describes the best practice to manage multiple Kubernetes clusters, each with one or more TiDB clusters installed.

The Terraform module in our case typically combines several sub-modules:

• A tidb-operator module, which creates the EKS cluster and deploy TiDB Operator on the EKS cluster
• A tidb-cluster module, which creates the resource pool required by the TiDB cluster
• A VPC module, a bastion module and a key-pair module that are dedicated to TiDB on AWS

The best practice for managing multiple Kubernetes clusters is creating a new directory for each of your Kubernetes clusters, and combine the above modules according to your needs via Terraform scripts, so that the Terraform states among clusters do not interfere with each other, and it is convenient to expand. Here's an example:

{{< copyable "shell-regular" >}}

# assume we are in the project root
mkdir -p deploy/aws-staging
vim deploy/aws-staging/main.tf

The content of deploy/aws-staging/main.tf could be:

provider "aws" {
  region = "us-west-1"
}

# Creates an SSH key to log in the bastion and the Kubernetes node
module "key-pair" {
  source = "../modules/aws/key-pair"

  name = "another-eks-cluster"
  path = "${path.cwd}/credentials/"
}

# Provisions a VPC
module "vpc" {
  source = "../modules/aws/vpc"

  vpc_name = "another-eks-cluster"
}

# Provisions an EKS control plane with TiDB Operator installed
module "tidb-operator" {
  source = "../modules/aws/tidb-operator"

  eks_name           = "another-eks-cluster"
  config_output_path = "credentials/"
  subnets            = module.vpc.private_subnets
  vpc_id             = module.vpc.vpc_id
  ssh_key_name       = module.key-pair.key_name
}

# HACK: enforces Helm to depend on the EKS
resource "local_file" "kubeconfig" {
  depends_on        = [module.tidb-operator.eks]
  sensitive_content = module.tidb-operator.eks.kubeconfig
  filename          = module.tidb-operator.eks.kubeconfig_filename
}
provider "helm" {
  alias    = "eks"
  insecure = true
  install_tiller = false
  kubernetes {
    config_path = local_file.kubeconfig.filename
  }
}

# Provisions a node pool for the TiDB cluster in the EKS cluster
module "tidb-cluster-a" {
  source = "../modules/aws/tidb-cluster"
  providers = {
    helm = "helm.eks"
  }

  cluster_name = "tidb-cluster-a"
  eks          = module.tidb-operator.eks
  ssh_key_name = module.key-pair.key_name
  subnets      = module.vpc.private_subnets
}

# Provisions a node pool for another TiDB cluster in the EKS cluster
module "tidb-cluster-b" {
  source = "../modules/aws/tidb-cluster"
  providers = {
    helm = "helm.eks"
  }

  cluster_name = "tidb-cluster-b"
  eks          = module.tidb-operator.eks
  ssh_key_name = module.key-pair.key_name
  subnets      = module.vpc.private_subnets
}

# Provisions a bastion machine to access the TiDB service and worker nodes
module "bastion" {
  source = "../modules/aws/bastion"

  bastion_name             = "another-eks-cluster-bastion"
  key_name                 = module.key-pair.key_name
  public_subnets           = module.vpc.public_subnets
  vpc_id                   = module.vpc.vpc_id
  target_security_group_id = module.tidb-operator.eks.worker_security_group_id
  enable_ssh_to_workers    = true
}

output "bastion_ip" {
  description = "Bastion IP address"
  value       = module.bastion.bastion_ip
}

As shown in the code above, you can omit most of the parameters in each of the module calls because there are reasonable defaults, and it is easy to customize the configuration. For example, just delete the bastion module call if you do not need it.

To customize each field, you can refer to the default Terraform module. Also, you can always refer to the variables.tf file of each module to learn about all the available parameters.

In addition, you can easily integrate these modules into your own Terraform workflow. If you are familiar with Terraform, this is our recommended way of use.

Note:

• When creating a new directory, please pay attention to its relative path to Terraform modules, which affects the source parameter during module calls.
• If you want to use these modules outside the tidb-operator project, make sure you copy the whole modules directory and keep the relative path of each module inside the directory unchanged.
• Due to limitation hashicorp/terraform#2430 of Terraform, the hack processing of Helm provider is necessary in the above example. It is recommended that you keep it in your own Terraform scripts.

If you are unwilling to write Terraform code, you can also copy the deploy/aws directory to create new Kubernetes clusters. But note that you cannot copy a directory that you have already run terraform apply against, when the Terraform state already exists in local. In this case, it is recommended to clone a new repository before copying the directory.