Send ADC voltage and other payload via LoRa RFM95W

Just another LCD Shield for you Arduino... but with ALOT extra features!

Arduino with RFM69 ISM radio running at 1.8V

LoRa node for measuring the pool water and air temperature using the Arduino Pro Mini on a Li-Ion cell

Compact USB MySensors gateway with a RFM69 or RFM95 radio for DIY IoT sensors

ATTiny1614 + SX1276 + BME280

LoRa node for measuring the temperature using the Arduino Pro Mini on a Li-Ion cell

LoRa Weather for my weather station using the Arduino Pro Mini on a Li-Ion cell

Single Channel LoRaWAN Gateway

LoRa node for reading the status of a connected contact using the Arduino Pro Mini on a Li-Ion cell

A breadboard friendly breakout board for the RFM95 LoRa module.

DIY lora gateway using Wemos D1 ESP8266

LoRa node for reading the pulses of the energy meter using the Arduino Pro Mini on a Li-Ion cell

LoRa node for measuring Hottub water and filtration temperature using the Arduino Pro Mini on a Li-Ion cell

Remote Sensor Project

Ultra low cost LoRaWAN temp & humidity sensor based on Atmega328p , DHT 11 and RFM95W LoRa WAN module

A tinygo library to run an rfm9x module - RFM95/96/97/98 (W)

An example LoRaWAN Application on the Zephyr RTOS

The SparkFun Pro RF is a LoRa®-enabled wireless board that marries a SAMD21 and a long-range RFM95W to make a compact and easy-to-use IoT Arduino board.