Arduino x Wemos Project | Personal Experiment

Software Serial

Board Package for Logic Green LGT8F328P LGT8F328D and LGT8F88D

Anti-Thef Arduino

different examples for Apollo3 / Artemis

A porotype for the project traffic density measurement system.

Software Serial Loopback implementation of Arduino SoftwareSerial Library. Use cases: Arduino based Midi devices with internal routing; loopback testing to simulate external serial devices; intra-device FIFO buffered communication between software components.

ESP32 with FreeRTOS, SQLITE, SoftwareSerial, HTTPS Redirect and TinyGPS++ (SDS011 and PMS3003 double sensors)

SAMD21 add-on

The Arduino fire-fighting robot with SMS and call alert is a robot designed to detect and extinguish fires in buildings. It uses flame sensors to detect fires and water pumps to spray water or extinguishing agents. In addition, the robot is equipped with a GSM module that can send SMS and call alerts to designated phone numbers in case of a fire em

A short example on how to send data from Arduino to NodeMCU

Arduino library for reading Ibus values through SoftwareSerial pins

This is simple LED BANNER constructed of Arduino Digispark and daisy-chained set of MAX7219 LED 8x8 matrix. Displays up to 500 characters long text message that is stored in non-volatile EEPROM memory of the chip and uploaded via USB from the PC ( Putty terminal ) - natively from USB or via FTDI232 USB-to-Serial converter

A basic implementation of Arduino serial communication with gsm-sim800l

Health Monitoring System is my university term project for the Hardware lab. This repository contains a detailed description of the project and code also.

Wind speed and direction sensor for the ioBroker IoT framework

LM35(4 adet )sıcaklık sensörlerinden aldığım verileri HC-05 bluetooth modülü vasıtası ile geliştirdiğim mobil uyulama üzerinden okuyorum. (Arduıno-Mıt App Invertor haberlesmesi)

Environment sensor that uses DHT

Enables serial communication on any digital pin.

Blynk PZEM-016 with NodeMCU. This code works with only one PZEM 016 device with nodemcu (esp8266).