Skip to content

Latest commit

 

History

History
94 lines (62 loc) · 5.51 KB

README.md

File metadata and controls

94 lines (62 loc) · 5.51 KB

Build Status

More notes on the implementation can be seen here

Overview

Riddles

The main concept is visualized in the figure below.

Figure 1: Main concept

To open the second door, 3 puzzles must be solved. These puzzles are called Stages in the following. In case the participants get stuck they can ask for hints. The implemented hints can be seen here

Stage 1 - Breaking the lock of the fusebox

In the first stage the group has to crack the lock of the fusebox. A laser somewhere in the room is to be used. There is a lock on the fusebox which can only be opened when the laser beam is aimed at it. To do this, the group must use mirrors to divert the laser beam through the entire room. The 2 mirrors that can be used are mounted on a wall. This hides them, and the group must come up with the idea of using the mirrors.

The lock on the fusebox measures the laser beam. So that only this specific laser light can open the lock. The readout of the signal is done by the ESP32 inside the fusebox. The progress of this crack process is visualized with LEDs arranged in a circle. Once this color circle is closed, the microcontroller gives a signal to an actuator so that the lid of the fusebox opens. This completes the first stage.

Figure 2: Laser lock

To make it easier for the participants the laser warning symbol will be attached to the fusebox.

Stage 2 - Restoring the power supply for the robot

Inside the fusebox two small "rewiring" riddles need to be solved . The following image shows the inside of the fusebox.

Figure 3: PCB fusebox

In the middle you can see an ESP32, which is responsible for the entire control of the PCB. Left to the ESP32, you can see two 5 pin headers (marked with 1). Both pairs must be connected using the attached jumper wire. The coding is hidden in the color marking of a soldered resistor which is right next to the connector. Above the ESP32 is a seven-segment display with 4 digits (marked with 2). With the help of potentiometers, a number can be set here (the year in which the faculty was founded). To the right of the ESP32 is the third riddle. Again the jumper wire needs to be connected in the right order. This time a binary number needs to be coded. Black wire indicates a zero and white wire a one. To get the right solution the participants have to sum up two hexadecimal numbers. The progress is visualized by an LED matrix on top of the PCB. In addition to the puzzles, there are other components on the PCB to confuse the group. When all the puzzles are solved, the robot inside the server room will get controllable from outside.

Stage 3 - Breaking door by robot

It is just possible to open the door from inside by pushing a button with a small robot. Luckily the participants were able to repower the robot in the riddle before. The controller of the robot is placed on the other side of the room and a small window to look inside the server room is at the door. Therefore one participant has to guide the controlling one.

Figure 4: Robot

Communication

To standardize the communication for all devices and make the handling as easy as possible we implemented the MqttBase. Each device for the above riddles make use of this class. The class is embedded as sub repository.

How to

The project is structured in four folder:

Folder Description
3D-files Contrains all .stp and .stl files for the designed cases
code The .io files with all the code for each riddle
docu More detailed information about the implementation
pcb The schematic and layout for the designed pcb

The easiest way to work/compile/upload the code is to get vs code and install PlatfomIO as extension. The dependencies of each project are declared within the "lib_deps". The only missing part is the "wifi_secure.h" file which has to be created by the user. The file must contain:

const char* ssid = "";
const char* password = "";

If you want to get the serial output for connection information define in the main.cpp file:

#define DEBUG

Future work

  • robot controlled by ESP32 only
  • cover/coating for pcb inside fusebox
  • coating for fusebox