From 35b8633b380b2ad47e144804a9b2e2b3f5b79943 Mon Sep 17 00:00:00 2001 From: Aleksandr Date: Wed, 11 Dec 2024 11:28:58 +0300 Subject: [PATCH] Update uSwitch_Specification_en.md --- documentation/EN/uSwitch/uSwitch_Specification_en.md | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/documentation/EN/uSwitch/uSwitch_Specification_en.md b/documentation/EN/uSwitch/uSwitch_Specification_en.md index a67f5461..fcb54741 100644 --- a/documentation/EN/uSwitch/uSwitch_Specification_en.md +++ b/documentation/EN/uSwitch/uSwitch_Specification_en.md @@ -90,10 +90,10 @@ The device allows you to switch the maximum power of the transmitting circuit fo Switching between modes is carried out by soldering the corresponding jumper (0 Ohm resistor, 1206 package). - for operation at maximum range: -- R1 is not soldered, R2 is soldered + - R1 is not soldered, R2 is soldered - for operation in swimming pools: -- R1 is soldered, R2 is not soldered + - R1 is soldered, R2 is not soldered > IMPORTANT! Soldering both jumpers R1 and R2 at the same time will lead to failure of the devices and non-warranty breakdown