Support for evl4/uno with dsc Neo panel integration with HA

[lbrettman]

I have a DSC Neo hs2032 connected with a evl4/uno and would like to be able to integrate into HA. I there any way to do this? Does anyone know if anyone is working on this? Thanks

[ufodone]

What do you mean by "evl4/uno"? It sounds like you have a DSC panel with an EVL4 board installed. To the best of my knowledge, the Uno is a separate product that does not rely on a DSC or Honeywell panel.

DSC/EVL4 is supported by this integration.

Uno panels are also supported but support is a bit more limited at the moment due to limitations in the firmware. A new firmware was just released though so additional support should be coming soon(ish).

[lbrettman]

This is the setup. Apparently a DSc Neo panel needs to be setup as universal device and requires an evl4-max and a uno4 module. The Evl4 does not work with a Neo panel by itself only older dsc panels according to envisalink support . ThanksUNIVERSAL KITIncludes the EVL4-MAX board, an UNO4 and the Universal Enclosure all in one kit. Perfect for a DSC NEO application.—Lee R. BrettmanEmail: ***@***.*** Feb 2, 2025, at 12:20 AM, ufodone ***@***.***> wrote: What do you mean by "evl4/uno"? It sounds like you have a DSC panel with an EVL4 board installed. To the best of my knowledge, the Uno is a separate product that does not rely on a DSC or Honeywell panel. DSC/EVL4 is supported by this integration. Uno panels are also supported but support is a bit more limited at the moment due to limitations in the firmware. A new firmware was just released though so additional support should be coming soon(ish). —Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you authored the thread.Message ID: ***@***.***>