config

# i3 config file (v4)
#
# Please see https://i3wm.org/docs/userguide.html for a complete reference!
#
# This config file uses keycodes (bindsym) and was written for the QWERTY
# layout.
#
# To get a config file with the same key positions, but for your current
# layout, use the i3-config-wizard
#

# Font for window titles. Will also be used by the bar unless a different font
# is used in the bar {} block below.
font pango:SF Pro Display 10

# This font is widely installed, provides lots of unicode glyphs, right-to-left
# text rendering and scalability on retina/hidpi displays (thanks to pango).
#font pango:DejaVu Sans Mono 8

# Start XDG autostart .desktop files using dex. See also
# https://wiki.archlinux.org/index.php/XDG_Autostart
exec --no-startup-id dex --autostart --environment i3

# The combination of xss-lock, nm-applet and pactl is a popular choice, so
# they are included here as an example. Modify as you see fit.

# xss-lock grabs a logind suspend inhibit lock and will use i3lock to lock the
# screen before suspend. Use loginctl lock-session to lock your screen.
exec --no-startup-id xss-lock --transfer-sleep-lock -- i3lock --nofork

# NetworkManager is the most popular way to manage wireless networks on Linux,
# and nm-applet is a desktop environment-independent system tray GUI for it.
exec --no-startup-id nm-applet

# Use pactl to adjust volume in PulseAudio.
set $refresh_i3status killall -SIGUSR1 i3status
# Raise volume
bindsym XF86AudioRaiseVolume exec --no-startup-id pactl set-sink-volume @DEFAULT_SINK@ +2% && $refresh_i3status
# Lower volume
bindsym XF86AudioLowerVolume exec --no-startup-id pactl set-sink-volume @DEFAULT_SINK@ -2% && $refresh_i3status
# Mute volume
bindsym XF86AudioMute exec --no-startup-id pactl set-sink-mute @DEFAULT_SINK@ toggle && $refresh_i3status
# Mute microphone
bindsym XF86AudioMicMute exec --no-startup-id pactl set-source-mute @DEFAULT_SOURCE@ toggle && $refresh_i3status
# Play/Pause
bindsym XF86AudioPlay exec playerctl play-pause
# Next track
bindsym XF86AudioNext exec playerctl next
# Previous track
bindsym XF86AudioPrev exec playerctl previous

# Monitor brightness
# increase
bindsym XF86MonBrightnessDown exec brightnessctl s 5%-
#decrease
bindsym XF86MonBrightnessUp exec brightnessctl s +5%

# use these keys for focus, movement, and resize directions when reaching for
# the arrows is not convenient
set $up l
set $down k
set $left j
set $right semicolon

# Set variables
set $terminal kitty
# i3-sensible-terminal -- default value

# use Mouse+Mod1 to drag floating windows to their wanted position
floating_modifier Mod1

# move tiling windows via drag & drop by left-clicking into the title bar,
# or left-clicking anywhere into the window while holding the floating modifier.
tiling_drag modifier titlebar

# start a terminal
bindsym Mod1+Return exec $terminal 

# start file manager
bindsym Mod4+e exec nemo

# run screensaver
# Bind PrintScreen key to flameshot gui
bindsym Print exec --no-startup-id flameshot gui

# kill focused window
bindsym Mod1+Shift+q kill

# start dmenu (a program launcher)

# bindsym Mod1+d exec --no-startup-id dmenu_run

# A more modern dmenu replacement is rofi:
# bindsym Mod1+d exec "rofi -modi drun,run -show drun"
# There also is i3-dmenu-desktop which only displays applications shipping a
# .desktop file. It is a wrapper around dmenu, so you need that installed.
# bindsym Mod1+d exec --no-startup-id i3-dmenu-desktop

# change focus
bindsym Mod1+$left focus left
bindsym Mod1+$down focus down
bindsym Mod1+$up focus up
bindsym Mod1+$right focus right

# alternatively, you can use the cursor keys:
bindsym Mod1+Left focus left
bindsym Mod1+Down focus down
bindsym Mod1+Up focus up
bindsym Mod1+Right focus right

# move focused window
bindsym Mod1+Shift+$left move left
bindsym Mod1+Shift+$down move down
bindsym Mod1+Shift+$up move up
bindsym Mod1+Shift+$right move right

# alternatively, you can use the cursor keys:
bindsym Mod1+Shift+Left move left
bindsym Mod1+Shift+Down move down
bindsym Mod1+Shift+Up move up
bindsym Mod1+Shift+Right move right

# split in horizontal orientation
bindsym Mod1+h split h

# split in vertical orientation
bindsym Mod1+v split v

# enter fullscreen mode for the focused container
bindsym Mod1+f fullscreen toggle

# change container layout (stacked, tabbed, toggle split)
bindsym Mod1+s layout stacking
bindsym Mod1+w layout tabbed
bindsym Mod1+e layout toggle split

# toggle tiling / floating
bindsym Mod1+Shift+space floating toggle

# change focus between tiling / floating windows
bindsym Mod1+space focus mode_toggle

# focus the parent container
bindsym Mod1+a focus parent

# focus the child container
#bindsym Mod1+d focus child

# move the currently focused window to the scratchpad
bindsym Mod1+Shift+minus move scratchpad

# Show the next scratchpad window or hide the focused scratchpad window.
# If there are multiple scratchpad windows, this command cycles through them.
bindsym Mod1+minus scratchpad show

# Define names for default workspaces for which we configure key bindings later on.
# We use variables to avoid repeating the names in multiple places.
set $ws1 "1"
set $ws2 "2"
set $ws3 "3"
set $ws4 "4"
set $ws5 "5"
set $ws6 "6"
set $ws7 "7"
set $ws8 "8"
set $ws9 "9"
set $ws10 "10"

# switch to workspace
bindsym Mod1+1 workspace number $ws1
bindsym Mod1+2 workspace number $ws2
bindsym Mod1+3 workspace number $ws3
bindsym Mod1+4 workspace number $ws4
bindsym Mod1+5 workspace number $ws5
bindsym Mod1+6 workspace number $ws6
bindsym Mod1+7 workspace number $ws7
bindsym Mod1+8 workspace number $ws8
bindsym Mod1+9 workspace number $ws9
bindsym Mod1+0 workspace number $ws10
# switch to workspace using mouse wheel
bindsym --whole-window --border Mod1+button5 workspace next
bindsym --whole-window --border Mod1+button4 workspace prev

# move focused container to workspace
bindsym Mod1+Shift+1 move container to workspace number $ws1
bindsym Mod1+Shift+2 move container to workspace number $ws2
bindsym Mod1+Shift+3 move container to workspace number $ws3
bindsym Mod1+Shift+4 move container to workspace number $ws4
bindsym Mod1+Shift+5 move container to workspace number $ws5
bindsym Mod1+Shift+6 move container to workspace number $ws6
bindsym Mod1+Shift+7 move container to workspace number $ws7
bindsym Mod1+Shift+8 move container to workspace number $ws8
bindsym Mod1+Shift+9 move container to workspace number $ws9
bindsym Mod1+Shift+0 move container to workspace number $ws10
# move focused container to workspace using mouse
bindsym --whole-window --border Mod1+Shift+button5 exec --no-startup-id bash $HOME/.config/i3/Scripts/move_container.sh next
bindsym --whole-window --border Mod1+Shift+button4 exec --no-startup-id bash $HOME/.config/i3/Scripts/move_container.sh prev

# reload the configuration file
bindsym Mod1+Shift+c reload
# restart i3 inplace (preserves your layout/session, can be used to upgrade i3)
bindsym Mod1+Shift+r restart
# exit i3 (logs you out of your X session)
bindsym Mod1+Shift+e exec "i3-nagbar -t warning -m 'You pressed the exit shortcut. Do you really want to exit i3? This will end your X session.' -B 'Yes, exit i3' 'i3-msg exit'"

# resize window (you can also use the mouse for that)
mode "resize" {
        # These bindings trigger as soon as you enter the resize mode

        # Pressing left will shrink the window’s width.
        # Pressing right will grow the window’s width.
        # Pressing up will shrink the window’s height.
        # Pressing down will grow the window’s height.
        bindsym $left       resize shrink width 5 px or 5 ppt
        bindsym $down       resize grow height 5 px or 5 ppt
        bindsym $up         resize shrink height 5 px or 5 ppt
        bindsym $right      resize grow width 5 px or 5 ppt

        # same bindings, but for the arrow keys
        bindsym Left        resize shrink width 5 px or 5 ppt
        bindsym Down        resize grow height 5 px or 5 ppt
        bindsym Up          resize shrink height 5 px or 5 ppt
        bindsym Right       resize grow width 5 px or 5 ppt

        # back to normal: Enter or Escape or Mod1+r
        bindsym Return mode "default"
        bindsym Escape mode "default"
        bindsym Mod1+r mode "default"
}

bindsym Mod1+r mode "resize"

# Set inner gaps between windows
gaps inner 5px

# Wallpaper changer
bindsym Mod1+Shift+w exec --no-startup-id bash $HOME/.config/i3/Scripts/wallpaper.sh

# Start i3bar to display a workspace bar (plus the system information i3status
# finds out, if available)

bar {
        status_command i3status --config ~/.config/i3/i3status.config
        colors {
                background #340032
        }
}

#######################################################################
# automatically start i3-config-wizard to offer the user to create a
# keysym-based config which used their favorite modifier (alt or windows)
#
# i3-config-wizard will not launch if there already is a config file
# in ~/.config/i3/config (or $XDG_CONFIG_HOME/i3/config if set) or
# ~/.i3/config.
#
# Please remove the following exec line:
#######################################################################
exec i3-config-wizard


# Included custom config files
include i3lock.config
include kbd_layouts.config
include rofi.config
include borders.config
include executor.config