CC heating rooms above outside temps periodically

[witherspore]

I may need to create a video to demonstrate, but will do my best with written words.

Case one:

• Outside temp: 30C
• Blue network pipe connected to intake fan: -132C
• Climate Control system set to -132C - no change from intake fan temp
• Output vents: various rooms heat up to 50C, then cool down to negatives. then heat up again to up to 50C - well beyond the outside temp. No other heating/cooling systems installed. This variation requires a few hours of game time between heating and cooling cycles.

Case Two:

• Outside temp: 30C
• Red network connected to vent room A at -110C (and kept at that temp with vanilla coolers)
• Red network connected to vent room B at 30C.
• No Climate Control systems installed - passive vent to vent cooling only.
• Room B cools for a few hours, then heats up to 50C, then starts to cool again a few hours later. The cycle continues.

Its strange behavior. I can shoot a video if it would help. I am using extreme temps for the passive and active intakes to the system, but the periodic behavior is very odd as well.