Skip to content

Latest commit

 

History

History
1121 lines (911 loc) · 38.5 KB

README.adoc

File metadata and controls

1121 lines (911 loc) · 38.5 KB

qtest

qtest is an inline test extraction project, originally developed internally for the OCaml Batteries Included library under the name qtest. It relies on oUnit as a testing framework, though users need not know anything about it for basic usage; it also relies on Qcheck for random testing.

Note
qtest stands for Quick Testing.
  • qtest is available for installation as an OPAM package.

  • It has extensive documentation: see section "Introduction: What Is QTest?" to get started.

  • It has good syntax highlighting for Kate (KatePart: KWrite, KDevelop, Konqueror,…​) and basic support for Emacs. See the editor_support directory

Manual installation:

./configure
make build install

To use a custom installation prefix, use

./configure --prefix <path>

Future works:

There are ideas floating around on how to improve qtest2, generally revolving around going from a test "extraction" to an "annotation" model. No timetable is set yet, as all parties involved are busy bees, and qtest2 currently covers most of the needs of the Batteries project and others.

History of the project:

(or at least, what I (VH) can unearth of it thanks to git logs)

  • 2007—​2008 : Ilmari Heikkinen writes make_suite.rb for his Prelude.ml.

  • Jan 17, 2011: make_suite.rb is copied into Batteries. (=qtest0)

  • Jan 27, 2011: Kaustuv Chaudhuri writes from scratch an equivalent make_suite.mll to replace the Ruby script. (=qtest1)

  • Jan 19, 2012: Vincent Hugot writes from scratch a new version, with a lot of new features. Syntax changes a bit. (=qtest2)

  • Oct 21, 2012: qtest2 moves to its own repository.

  • Sept. 2015: Simon Cruanes contributes a significant improvement of the random generation process.

  • March. 2016: Simon Cruanes integrates qcheck with qtest

  • Dec. 2016: qcheck and qtest are split apart again

  • Feb. 2018: renaming the repository to qtest again

Over time, the various versions of qtest have received contributions by: Eric Norige, Gabriel Scherer, Cedric Cellier, Valentin Gatien-Baron, Max Mouratov, and Simon Cruanes.

Contact:

The preferred way is to create a new issue on GitHub.

Current maintainer: Simon Cruanes.


Introduction: What Is QTest?

In a nutshell, qtest is a small program which reads .ml and .mli source files and extracts inline unit tests from them. It is used internally by the OCaml Batteries project, and is shipped with it as of version 2.0, but it does not depend on it and can be compiled and used independently.

Browse its code in the Github Repository.

Using qtest: a Quick, Simple Example

Say that you have a file foo.ml, which contains the implementation of your new, shiny function foo.

let rec foo x0 f = function
  | [] -> 0 | x::xs -> f x (foo x0 f xs)

Maybe you don’t feel confident about that code; or maybe you do, but you know that the function might be re-implemented less trivially in the future and want to prevent potential regressions. Or maybe you simply think unit tests are good practice anyway. In either case, you feel that building a separate test suite for this would be overkill. Using qtest, you can immediately put simple unit tests in comments near foo, for instance:

(*$T foo
  foo  0 ( + ) [1;2;3] = 6
  foo  0 ( * ) [1;2;3] = 0
  foo  1 ( * ) [4;5]   = 20
  foo 12 ( + ) []      = 12
*)

the syntax is simple: (*$ introduces a qtest "pragma", such as T in this case. T is by far the most common and represents a "simple" unit test. T expects a "header", which is most of the time simply the name of the function under test, here foo. Following that, each line is a "statement", which must evaluate to true for the test to pass. Furthermore, foo must appear in each statement.

Now, in order to execute those tests, you need to extract them; this is done with the qtest executable. The command

$ qtest -o footest.ml extract foo.ml
Target file: `footest.ml'. Extraction : `foo.ml' Done.

will create a file footest.ml; it’s not terribly human-readable, but you can see that it contains your tests as well as some OUnit boilerplate. Now you need to compile the tests, for instance with ocamlbuild, and assuming OUnit was installed for ocamlfind.

$ ocamlbuild -cflags -warn-error,+26 -use-ocamlfind -package oUnit \
    footest.native
Finished, 10 targets (1 cached) in 00:00:00.

Note that the -cflags -warn-error,+26 is not indispensable but strongly recommended. Its function will be explained in more detail in the more technical sections of this documentation, but roughly it makes sure that if you write a test for foo, via (*$T foo for instance, then foo is actually tested by each statement – the tests won’t compile if not.

Important note: in order for this to work, ocamlbuild must know where to find foo.ml; if footest.ml is not in the same directory, you must make provisions to that effect. If foo.ml needs some specific flags in order to compile, they must also be passed.

Now there only remains to run the tests:

$ ./footest.native
..FF
==============================================================================
Failure: qtest:0:foo:3:foo.ml:10

OUnit: foo.ml:10::>  foo 12 ( + ) [] = 12
------------------------------------------------------------------------------
==============================================================================
Failure: qtest:0:foo:2:foo.ml:9

OUnit: foo.ml:9::>  foo 1 ( * ) [4;5] = 20
------------------------------------------------------------------------------
Ran: 4 tests in: 0.00 seconds.
FAILED: Cases: 4 Tried: 4 Errors: 0 Failures: 2 Skip:0 Todo:0

Oops, something’s wrong… either the tests are incorrect or foo is. Finding and fixing the problem is left as an exercise for the reader. When this is done, you get the expected

$ ./footest.native
....
Ran: 4 tests in: 0.00 seconds.
Tip
those steps are easy to automate, for instance with a small shell script:
set -e # stop on first error
qtest -o footest.ml extract foo.ml
ocamlbuild -cflags -warn-error,+26 -use-ocamlfind -package oUnit footest.native
./footest.native

More qtest Pragmas

Different Kinds of Tests

Simple Tests: T for "Test"

The most common kind of tests is the simple test, an example of which is given above. It is of the form

(*$T <header>
  <statement>
  ...
*)

where each statement must be a boolean OCaml expression involving the function (or functions, as we will see when we study headers) referenced in the header. The overall test is considered successful if each statement evaluates to true. Note that the "close comment" *) must appear on a line of its own.

Tip: if a statement is a bit too long to fit on one line, if can be broken using a backslash (\), immediately followed by the carriage return. This also applies to randomised tests.

Equality Tests: =

The vast majority of test cases tend to involve the equality of two expressions; using simple tests, one would write something like:

(*$T foo
  foo 1 ( * ) [4;5] = foo 3 ( * ) [1;5;2]
*)

While this certainly works, the failure report for such a test does not convey any useful information besides the simple fact that the test failed. Wouldn’t it be nice if the report also mentioned the values of the left-hand side and the right-hand side ? Yes it would, and specialised equality tests provide such functionality, at the cost of a little bit of boilerplate code. The bare syntax is:

(*$= <header>
  <lhs> <rhs>
  ...
*)

However, used bare, an equality test will not provide much more information than a simple test: just a laconic "not equal". In order for the values to be printed, a "value printer" must be specified for the test. A printer is a function of type 'a → string, where 'a is the type of the expressions on both side of the equality. To pass the printer to the test, we use parameter injection (cf. Section Header Parameters Injection); equality tests have an optional argument printer for this purpose. In our example, we have 'a = int, so the test becomes simply:

(*$= foo & ~printer:string_of_int
  (foo 1 ( * ) [4;5]) (foo 3 ( * ) [1;5;2])
*)

The failure report will now be more explicit, saying expected: 20 but got: 30.

Randomized Tests: Q for "Quickcheck"

Quickcheck is a small library useful for randomized unit tests. Using it is a bit more complex, but much more rewarding than simple tests.

(*$Q <header>
  <generator> (fun <generated value> -> <statement>)
  ...
*)

Let us dive into an example straight-away:

(*$Q foo
  Q.small_int (fun i-> foo i (+) [1;2;3] = List.fold_left (+) i [1;2;3])
*)

The Quickcheck module is accessible simply as Q within inline tests; small_int is a generator, yielding a random, small integer. When the test is run, each statement will be evaluated for a large number of random values – 100 by default. Running this test for the above definition of foo catches the mistake easily:

law foo.ml:14::>  Q.small_int (fun i-> foo i (+) [1;2;3]
    = List.fold_left (+) i [1;2;3])
failed for 2

Note that the random value for which the test failed is provided by the error message – here it is 2. It is also possible to generate several random values simultaneously using tuples. For instance

(Q.pair Q.small_int (Q.list Q.small_int)) \
  (fun (i,l)-> foo i (+) l = List.fold_left (+) i l)

will generate both an integer and a list of small integers randomly. A failure will then look like

law foo.ml:15::>  (Q.pair Q.small_int (Q.list Q.small_int))
    (fun (i,l)-> foo i (+) l = List.fold_left (+) i l)
failed for (727, [4; 3; 6; 1; 788; 49])

A generator such as Q.pair Q.small_int Q.printable_string is actually a value of type 'a Q.arbitrary (in this particular case, (int * string) arbitrary). It combines a random generation function ('a Q.Gen.t), and optional printing, shrinking and size functions that are used to display counter-examples and minimize their size. It is possible, as explained below, to define one’s own 'a arbitrary values, for instance for custom types.

Available Generators:

Simple generators

unit, bool, float, pos_float, neg_float, int, int32, int64, pos_int, small_int, neg_int, char, printable_char, numeral_char, string, printable_string, numeral_string

Structure generators

list and array. They take one generator as their argument. For instance (Q.list Q.neg_int) is a generator of lists of (uniformly taken) negative integers.

Tuple generators

pair and triple are respectively binary and ternary. See above for an example of pair.

Size-directed generators

string, numeral_string, printable_string, list and array all have *_of_size variants that take the size of the structure as their first argument.

See the online documentation of QCheck for more details.

Tips:

Duplicate Elements in Lists

When generating lists, avoid Q.list Q.int unless you have a good reason to do so. The reason is that, given the size of the Q.int space, you are unlikely to generate any duplicate elements. If you wish to test your function’s behaviour with duplicates, prefer Q.list Q.small_int.

Filtering Inputs

Rando, inputs can be filtered for a precondition by stating a property f =⇒ g. An input x will be tested for the property g only if f x holds, otherwise it is discarded and a new input is generated. The total number of inputs generated can be capped using the ~max_gen:int parameter (it should be bigger than ~count). The system will try to make count tests, but stops after max_gen inputs are generated to avoid looping forever if acceptable inputs are too rare.

Changing Number of Tests

If you want a specific test to execute each of its statements a specific number of times (deviating from the default of 100), you can specify it explicitly through parameter injection (cf. Section Header Parameters Injection) using the count : argument.

Getting a Better Counterexample

By default, a random test stops as soon as one of its generated values yields a failure. This first failure value is probably not the best possible counterexample. You can force qtest to generate and test all count random values regardless, and to display the value which is smallest with respect to a certain measure which you define. To this end, it suffices to use parameter injection to pass argument small : 'a → 'b, where 'a is the type of generated values and 'b is any totally ordered set (wrt. <). Typically you will take 'b = int or 'b = float. Example:

let fuz x = x
let rec flu = function
  | [] -> []
  | x :: l -> if List.mem x l then flu l else x :: flu l

(*$Q fuz; flu & ~small:List.length
  (Q.list Q.small_int) (fun x -> fuz x = flu x)
*)

The meaning of ~small:List.length is therefore simply: "choose the shortest list". For very complicated cases, you can simultaneously increase count to yield an even higher-quality counterexample.

Shrinking

A parameter shrink: ('a → 'a Q.Iter.t) can be provided along with a random generator. 'a Q.Iter.t is an iterator on values of type 'a. shrink x should iterate on a set of values that are smaller than x (for instance, if x: int list, shrink x will remove each element of the list). If a generator (of type 'a arbitrary) defines a shrink function, then whenever a counter-example is found for a property, the counter-example will be shrunk recursively as long as it continues refuting the property; this allows to find smaller and simpler counter-examples. However, shrinking can be slow. A parameter ~max_fail:int can be given to the test by writing (*$Q & ~max_fail:5 to limit the number of counter-examples to find, in case shrinking them is too slow.

The module Q.Shrink can be used to combine shrinking functions.

Example: the false property (Q.list Q.int) (fun l → not (List.mem 5 l)) might be falsified by the counter-example [1;2;3;4;5;6;7;8]. By recursively shrinking the value (trying to remove elements one by one) the minimal counter-example [5] will be found and displayed.

Raw Random Tests

Using ($QR, similar to the raw unit test ($R, it is possible to write a random test on multiple lines without the trailing \ characters.

(*$QR foo
  Q.small_int
    (fun i->
      foo i (+) [1;2;3] = List.fold_left (+) i [1;2;3]
    )
*)

The (*$QR block needs to contain exactly two values:

Random Generator

of type 'a Quickcheck.arbitrary

Property to test

of type 'a → bool

Custom Generators

For types that are not lists of integers or strings, it can be useful to define one’s own 'a arbitrary instance for the type. The function to use is Q.make, it takes a 'a Q.Gen.t random generator, and optional arguments

  • ~shrink:('a → 'a Iter.t) to define how to shrink counter-examples

  • ~small:('a → 'b) (where 'b is ordered) to select small counter-examples

  • ~print:('a → string) to print counter-examples

  • ~collect:('a → string) maps inputs to a string descriptor and counts how many values belong to each descriptor, for statistics.

    Some generators are already defined in Q.Gen. Gabriel Scherer’s random-generator library is also a good basis for more advanced generators.

    Printers can be defined using Q.Print, shrinkers using Q.Shrink.

Raw OUnit Tests: R for "Raw"

When more specialised test pragmas are too restrictive, for instance if the test is too complex to reasonably fit on one line, then one can use raw OUnit tests.

(*$R <header>
  <raw oUnit test>...
  ...
*)

Here is a small example, with two tests stringed together:

(*$R foo
  let thing = foo  1 ( * )
  and li = [4;5] in
  assert_bool "something_witty" (thing li = 20);
  assert_bool "something_wittier" (foo 12 ( + ) [] = 12)
*)

Note that if the first assertion fails, the second will not be executed; so stringing two assertions in that mode is different in that respect from doing so under a T pragma, for instance.

That said, raw tests should only be used as a last resort; for instance you don’t automatically get the source file and line number when the test fails. If T and Q do not satisfy your needs, then it is probably a hint that the test is a bit complex and, maybe, belongs in a separate test suite rather than in the middle of the source code.

Exception-Throwing Tests: E for "Exception"

… not implemented yet…

The current usage is to use (*$T and the following pattern for function foo and exception Bar:

try ignore (foo x); false with Bar -> true

If your project uses Batteries and no pattern-matching is needed, then you can also use the following, sexier pattern:

Result.(catch foo x |> is_exn Bar)

Manipulation Pragmas

Not all qtest pragmas directly translate into tests; for non-trivial projects, sometimes a little boilerplate code is needed in order to set the tests up properly. The pragmas which do this are collectively called "manipulation pragmas"; they are described in the next section.

Opening Modules: open Pragma <…​> and --preamble Option

The tests should have access to the same values as the code under test; however the generated code for foo.ml does not actually live inside that file. Therefore some effort must occasionally be made to synchronise the code’s environment with the tests’. There are three main usecases where you might want to open modules for tests:

Project-Wide Global Open

It may happen that every single file in your project opens a given module. This is the case for Batteries, for instance, where every module opens Batteries. In that case simply use the –preamble switch. For instance,

qtest --preamble "open Batteries;;"  extract mod1.ml mod2.ml ... modN.ml

Note that you could insert arbitrary code using this switch. c

Global Open in a File

Now, let’s say that foo.ml opens Bar and Baz; you want the tests in foo.ml to open them as well. Then you can use the open pragma in its global form:

(*$< Bar, Baz >*)

The modules will be open for every test in the same .ml file, and following the pragma. However, in our example, you will have a duplication of code between the "open" directives of foo.ml, and the open pragma of qtest, like so:

open Bar;; open Baz;;
(*$< Bar, Baz >*)

It might therefore be more convenient to use the code injection pragma (see next section) for that purpose, so you would write instead:

(*${*) open Bar;; open Baz;; (*$}*)

The code between that special markup will simply be duplicated into the tests. The two methods are equivalent, and the second one is recommended, because it reduces the chances of an impedance mismatch between modules open for foo.ml and its tests. Therefore, the global form of the open pragma should preferentially be reserved for cases where you want such a mismatch. For instance, if you have special modules useful for tests but useless for the main code, you can easily open then for the tests alone using the pragma.

Local Open for a Submodule

Let’s say we have the following foo.ml:

let outer x = <something>

module Submod = struct
  let inner y = 2*x
  (*$T inner
    inner 2 = 4
  *)
end

That seems natural enough… but it won’t work, because qtest is not actually aware that the test is "inside" Submod (and making it aware of that would be very problematic). In fact, so long as you use only test pragmas (ie. no manipulation pragma at all), the positions and even the order of the tests – respective to definitions or to each other – are unimportant, because the tests do not actually live in foo.ml. So we need to open Submod manually, using the local form of the open pragma:

module Submod = struct (*$< Submod *)
  let inner y = 2*x
  (*$T inner
    inner 2 = 4
  *)
end (*$>*)

Notice that the <…​> have simply been split in two, compared to the global form. The effect of that construct is that Submod will be open for every test between ($< Submod *) and ($>*). Of course, you could also forgo that method entirely and do this:

module Submod = struct
  let inner y = 2*x
  (*$T &
    Submod.inner 2 = 4
  *)
end

… but it is impractical and you are forced to use an empty header because qualified names are not acceptable as headers. The first method is therefore strongly recommended.

Code Injection Pragma:

TODO: ocamldoc comments that define unit tests from the offered examples

Technical Considerations and Other Details

What has been said above should suffice to cover at least 90% of use-cases for qtest. This section concerns itself with the remaining 10%.

Function Coverage

The headers of a test are not just there for decoration; three properties are enforced when a test, say, (*$X foo is compiled, where X is T, R, Q, QR,… :

  • foo exists; that is to say, it is defined in the scope of the module where the testappears – though one can play with pragmas to relax this condition somewhat. At the very least, it has to be defined somewhere. Failure to conform results in an Error: Unbound value foo.

  • foo is referenced in each statement of the test: for T and Q, that means "each line". For R, that means "once somewhere in the test’s body". Failure to conform results in a Warning 26: unused variable foo, which will be treated as an error if -warn-error +26 is passed to the compiler. It goes without saying that this is warmly recommended.

  • the test possesses at least one statement.

Those two conditions put together offer a strong guarantee that, if a function is referenced in a test header, then it is actually tested at least once. The list of functions referenced in the headers of extracted tests is written by qtest into qtest.targets.log. Each line is of the form

foo.ml   42    foo

where foo.ml is the file in which the test appears, as passed to extract, and 42 is the line number where the test pragma appears in foo.ml. Note that a same function can be listed several times for the same source file, if several tests involve it (say, two times if it has both a simple test and a random one). The exact number of statements involving foo in each test is currently not taken into account in the logs.

Headers and Metaheaders

The informal definition of headers given in the above was actually a simplification. In this section we explore two syntaxes available for headers.

Aliases

Some functions have exceedingly long names. Case in point :

let rec pretentious_drivel x0 f = function
  | [] -> x0
  | x::xs -> pretentious_drivel (f x x0) f xs
(*$T pretentious_drivel
  pretentious_drivel 1 (+) [4;5] = foo 1 (+) [4;5]
  ... pretentious_drivel of this and that...
*)

The constraint that each statement must fit on one line does not play well with very long function names. Furthermore, you known which function is being tested, it’s right there is the header; no need to repeat it a dozen times. Instead, you can define an alias, and write equivalently:

(*$T pretentious_drivel as x
  x 1 (+) [4;5] = foo 1 (+) [4;5]
  ... x of this and that...
*)

…thus saving many keystrokes, thereby contributing to the preservation of the environment. More seriously, aliases have uses beyond just saving a few keystrokes, as we will see in the next sections.

Mutually Tested Functions

Most of the time, a test only pertains to one function. There are times, however, when one wishes to test two functions – or more – at the same time. For instance

let rec even = function 0 -> true
  | n -> odd (pred n)
and odd = function 0 -> false
  | n -> even (pred n)

Let us say that we have the following test:

(*$Q <header>
  Q.small_int (fun n-> odd (abs n+3) = even (abs n))
*)

It involves both even and odd. That question is: "what is a proper header for this test?" One could simply put "even", and thus it would be referenced as being tested in the logs, but odd would not, which is unfair. Putting "odd" is symmetrically unfair. The solution is to put both, separated by a semi-colon:

(*$Q even; odd

That way both functions are referenced in the logs:

    foo.ml   37    even
    foo.ml   37    odd

and of course the compiler enforces that both of them are actually referenced in each statement of the test. Of course, each of them can be written under alias, in which case the header could be even as x; odd as y.

Testing Functions by the Dozen

Let us come back to our functions foo (after correction) and pretentious_drivel, as defined above.

let rec foo x0 f = function
  | [] -> x0
  | x::xs -> f x (foo x0 f xs)

let rec pretentious_drivel x0 f = function
  | [] -> x0
  | x::xs -> pretentious_drivel (f x x0) f xs

You will not have failed to notice that they bear more than a passing resemblance to one another. If you write tests for one, odds are that the same test could be useful verbatim for the other. This is a very common case when you have closely related functions, or even several implementations of the same function, for instance the old, slow, naïve, trustworthy one and the new, fast, arcane, highly optimised version you have just written. The typical case is sorting routines, of which there are many flavours.

For our example, recall that we have the following test for foo:

(*$Q foo
  (Q.pair Q.small_int (Q.list Q.small_int)) \
    (fun (i,l)-> foo i (+) l = List.fold_left (+) i l)
*)

The same test would apply to pretentious_drivel; you could just copy-and-paste the test and change the header, but it’s not terribly elegant. Instead, you can just just add the other function to the header, separating the two by a comma, and defining an alias:

(*$Q foo, pretentious_drivel as x
  (Q.pair Q.small_int (Q.list Q.small_int)) \
  (fun (i,l)-> x i (+) l = List.fold_left (+) i l)
*)

This same test will be run once for x = foo, and once for x = pretentious_drivel. Actually, you need not define an alias: if the header is of the form

(*$Q foo, pretentious_drivel

then it is equivalent to

(*$Q foo, pretentious_drivel as foo

so you do not need to alter the body of the test if you subsequently add new functions. A header which combines more than one "version" of a function in this way is called a metaheader.

Metaheaders Unleashed

All the constructs above can be combined without constraints: the grammar is as follows:

    Metaheader  ::=   Binding {";" Binding}
    Binding     ::=   Functions [ "as" ID ]
    Functions   ::=   ID {"," ID}
    ID          ::=   (*OCaml lower-case identifier*)

Header Parameters Injection

Use (*$inject foo *) to inject the piece of code foo at the beginning of this module’s tests. This is useful, for instance, to define frequently used random generators, or printers, or to instantiate a functor before testing it.

Warnings and Exceptions Thrown by qtest

Fatal error: exception Failure("Unrecognised qtest pragma: ` T foo'")

You have written something like ($ T foo; there must not be any space between ($ and the pragma.

Warning: likely qtest syntax error: `(* $T foo'. Done.

Self-explanatory; if $ is the first real character of a comment, it’s likely a mistyped qtest pragma. This is only a warning though.

Fatal error: exception Core.Bad_header_char("M", "Mod.foo")

You have used a qualified name in a header, for instance (*$T Mod.foo. You cannot do that, the name must be unqualified and defined under the local scope. Furthermore, it must be public, unless you have used pragmas to deal with private functions.

Error: Comment not terminated
Fatal error: exception Core.Unterminated_test(_, 0)

Most probably, you forgot the comment-closing *) to close some test.

Fatal error: exception Failure("runaway test body terminator: n))*)")

The comment-closing *) must be on a line of its own; or, put another way, every statement must be ended by a line break.

qtest Command-Line Options

$ qtest --help

** qtest (qtest)
USAGE: qtest [options] extract <file.mli?>...

OPTIONS:
--output <file.ml>    (-o) def: standard output
  Open or create a file for output; the resulting file will be an OCaml
  source file containing all the tests.

--preamble <string>   (-p) def: empty
  Add code to the tests' preamble; typically this will be an instruction
  of the form 'open Module;;'


--help          Displays this help page and stops

qtest Runtime Command-Line Options

Test files generated by qtest also accept command line options, described by --help if needed.

$ qtest extract foo.ml -o footest.ml

$ ocamlfind ocamlopt -package qcheck -linkpkg footest.ml -o footest

$ ./footest --help

run qtest suite
-v
-verbose  enable verbose tests
-l
-list     print list of tests (2 lines each). Implies -verbose
-s
-seed     set random seed (to repeat tests)
-help     Display this list of options
--help    Display this list of options

Currently the options are:

  • --verbose: verbose quick check tests (print statistics, etc.)

  • --list: print a list of tests as they are executed.

  • --seed: force the choice of a random seed. When random tests start, the random seed used by the random generators is displayed; later, providing the same seed with --seed <s> will repeat the same tests.

A few tricks

A few useful tricks when writing inline tests:

  • if possible, favor ($= a b *) over ($T (a = b) *), because the former makes it possible to add a printer (with & ~printer:some_printer) in case the two values are not equal

  • random tests are useful to check general properties, or compare a complex-but-efficient implementation to a (possibly naive) reference implementation. For instance, if we had implemented a fancy sort function my_sort on lists, we could compare it to the stdlib’s List.sort:

    (*$Q
      Q.(list int) (fun l -> \
        my_sort compare l = List.sort compare l)
    *)
  • to factor some code that is useful in tests, but should not appear in the module (for instance, printers or generators for running complex tests), you can use (*$inject …​ *) somewhere in the .ml file:

    type foo = { a : int; b : string }
    
    (*$inject
      let pp_foo f = Printf.sprintf "foo{a=%d, b=%s}" f.a f.b
    *)
    
    (*$= & ~printer:pp_foo
      {a=0; b="b1"} {a=42; b="b2"}
    *)

    here, the test can use a custom printer defined above (and it needs it, for it will fail badly).

Using qtest with dune

The simplest way is to use (inline_tests (backend qtest.lib)) in a library statement:

(library
  (name foo)
  (inline_tests (backend qtest.lib)))

And then dune runtest should automatically find inline tests in the library’s modules.

For better control, a rule can be used (adapt to fit your needs):

(rule
  (targets run_qtest.ml)
  (deps (source_tree src))
  ; here is where you need to tell qtest what files to consider
  (action (run qtest extract src/foo1.ml src/foo2.ml > %{targets})))

(executable
  (name run_qtest)
  (modules run_qtest)
  ; disable some warnings in qtests
  (flags :standard -warn-error -a -w -33-35-27-39)
  (libraries qcheck))

(alias
  (name    runtest)
  (deps    run_qtest.exe)
  (action  (run %{deps})))

Using qtest with OCamlbuild

The following snippet, added to myocamlbuild.ml, will use qtest to extract foo_tests.ml from foo.ml for any module foo.

open Ocamlbuild_plugin;;

rule "qtest extract"
  ~prod:"%_tests.ml"
  ~deps:["%.ml"]
  (fun env build ->
   Cmd(S[A"qtest"; A"extract"; A"-o"; P(env "%_tests.ml");
         P(env "%.ml")]))

It is also possible to make a single all_tests.ml file from many modules, if they are listed in all_tests.qtestpack file (similar to .mllib):

open Ocamlbuild_plugin;;

let import_qtestpack build packfile =
  let tags1 = tags_of_pathname packfile in
  let files = string_list_of_file packfile in
  let include_dirs = Pathname.include_dirs_of (Pathname.dirname packfile) in
  let files_alternatives =
    List.map begin fun module_name ->
      expand_module include_dirs module_name ["ml"; "mli"]
    end files
  in
  let files = List.map Outcome.good (build files_alternatives) in
  let tags2 =
    List.fold_right
      (fun file -> Tags.union (tags_of_pathname file))
      files tags1
  in
  (tags2, files)

let qtest_many target packfile env build =
  let packfile = env packfile and target = env target in
  let tags, files = import_qtestpack build packfile in
  Cmd(S[A "qtest";
        A "extract"; T tags;
        A "-o"; A target; Command.atomize_paths files]);;

rule "ocaml: modular qtest (qtestpack)"
  ~prods:["%.ml"]
  ~deps:["%.qtestpack"]
  ~doc:"Qtest supports building a test module by extracting cases
	directly from several composing several .ml{,i} files together.  \
	To use that feature with ocamlbuild, you should create a .qtestpack \
	file with the same syntax as .mllib or .mlpack files: \
	a whitespace-separated list of the capitalized module names \
	of the .ml{,i} files you want to combine together."
  (qtest_many "%.ml" "%.qtestpack");

For instance, run_tests.qtestpack might contain

src/Foo
src/sub/Bar

and the target would be

ocamlbuild -use-ocamlfind -package qcheck \
	-I src -I src/sub run_tests.native