This repository contains the ESPHome configuration for the Avatto Tuya Wi-Fi Thermostat, enabling seamless integration with Home Assistant and other smart home systems. By leveraging ESPHome, you can customize and enhance the functionality of your thermostat, providing greater control and automation capabilities.
Product Link: AliExpress - Avatto Tuya Wi-Fi Thermostat
Product: '{"p":"m3j5wouhgsvjlma9","v":"1.0.0","m":0}'
- Module: WBR3 (RTL8710)
- Compatibility: Not compatible with ESPHome or OpenBeken
- Module: ESP-C3-12F
- Product Link: AliExpress
esptool flash_id output
Chip is ESP32-C3 (QFN32) (revision v0.3)
Features: WiFi, BLE, Embedded Flash 4MB (XMC)
Crystal is 40MHz
MAC: 84:f7:03:b6:b2:70
Uploading stub...
Running stub...
Stub running...
Manufacturer: 20
Device: 4016
Detected flash size: 4MB
📝 NOTE
To enter flashing mode, GPIO8 needs to be pulled high (to VCC) and GPIO9 pulled low.
Pre-flash the module before soldering it to the board.
Follow the Flashing Guide to correctly flash the ESP-C3-12F module.
- ESP-C3-12F Datasheet:
docs/esp-c3-12f_specification.pdf - Datapoints Description: The
docs/datapoints.mdfile contains descriptions of all known datapoints used by the device.
This project is licensed under the MIT License.