From 5065a6498ce28e9b4e2eecd48472c524a8f0203d Mon Sep 17 00:00:00 2001 From: Wassim Metallaoui Date: Sat, 8 Jun 2024 12:57:08 -0500 Subject: [PATCH] docs: update README to reflect keylight -> elgato-light --- README.md | 28 ++++++++++++++-------------- 1 file changed, 14 insertions(+), 14 deletions(-) diff --git a/README.md b/README.md index dc1edb3..aa92224 100644 --- a/README.md +++ b/README.md @@ -11,44 +11,44 @@ During troubleshooting, I learned it always has an IP address and never loses a It's a CLI tool with my Elgato light IP address of *192.168.0.25*, brightness, and temperature hard-coded as the defaults. ```shell -keylight on -keylight off +elgato-light on +elgato-light off ``` Brightness and/or temperature can be set when turning on. ```shell -keylight on --brightness 20 -keylight on --temperature 5000 -keylight on --brightness 20 --temperature 5000 +elgato-light on --brightness 20 +elgato-light on --temperature 5000 +elgato-light on --brightness 20 --temperature 5000 ``` Change the relative brightness between 0 and 100. *Use `--` for negative values.* ```shell -keylight brightness -- 10 -keylight brightness -- -10 +elgato-light brightness -- 10 +elgato-light brightness -- -10 ``` Set the temperature between 2900 and 7000. ```shell -keylight temperature 5000 +elgato-light temperature 5000 ``` Use a non-default IP address for the light on all commands. ```shell -keylight on --ip-address 192.168.0.10 -keylight off --ip-address 192.168.0.10 +elgato-light on --ip-address 192.168.0.10 +elgato-light off --ip-address 192.168.0.10 ``` Help is available for all commands. ```shell -keylight --help -keyligth on --help -keylight brightness --help +elgato-light --help +elgato-light on --help +elgato-light brightness --help ``` ### Troubleshooting @@ -56,7 +56,7 @@ keylight brightness --help Get the light status. ```shell -keylight status +elgato-light status ``` The Apple binaries are not signed with an Apple Developer account, so you must authorize them manually.