Makefile.generated_files

# Copyright 2016 The Kubernetes Authors.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#     http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

# Don't allow users to call this directly.  There are too many variables this
# assumes to inherit from the main Makefile.  This is not a user-facing file.
ifeq ($(CALLED_FROM_MAIN_MAKEFILE),)
    $(error Please use the main Makefile, e.g. `make generated_files`)
endif

# Don't allow an implicit 'all' rule.  This is not a user-facing file.
ifeq ($(MAKECMDGOALS),)
    $(error This Makefile requires an explicit rule to be specified)
endif

ifeq ($(DBG_MAKEFILE),1)
    ifeq ($(MAKE_RESTARTS),)
        $(warning ***** starting Makefile.generated_files for goal(s) "$(MAKECMDGOALS)")
    else
        $(warning ***** restarting Makefile.generated_files for goal(s) "$(MAKECMDGOALS)")
    endif
    $(warning ***** $(shell date))
endif


# Define variables so `make --warn-undefined-variables` works.
DBG_CODEGEN ?=
UPDATE_API_KNOWN_VIOLATIONS ?=

# This rule collects all the generated file sets into a single rule.  Other
# rules should depend on this to ensure generated files are rebuilt.
.PHONY: generated_files
generated_files: gen_prerelease_lifecycle gen_deepcopy gen_defaulter gen_conversion gen_openapi

#
# Helper logic to calculate Go's dependency DAG ourselves.
#

# This is a file that will be emitted by the go2make tool, containing a
# variable for each Go package in the project (including deps) which lists all
# of the transitive deps of that package.  Each variable is named the same as
# the package - for example the variable for `k8s.io/kubernetes/pkg/api` is
# $(k8s.io/kubernetes/pkg/api).  This is roughly the same DAG that the Go
# compiler uses.  These variables can be used to figure out if, for example,
# generated code needs to be regenerated.
GO_PKGDEPS_FILE = go-pkgdeps.mk

# Include the Go package dependencies file.  This will cause the rule of
# the same name to be considered and if it is updated, make will restart and
# reload the updated deps.
include $(META_DIR)/$(GO_PKGDEPS_FILE)

# Only build and run go2make on the first pass.  If that generates a new
# GO_PKGDEPS_FILE, make will restart the whole process and set MAKE_RESTARTS to
# a numeric value.
ifeq ($(MAKE_RESTARTS),)
# Update the set of Go deps for our project.  This will let us determine if
# we really need to do expensive codegen.  We use FORCE because it is not a
# PHONY file, but we do want it to be re-evaluated every time make is run.  The
# file will only be touched if it actually changes.
$(META_DIR)/$(GO_PKGDEPS_FILE): FORCE
	if [[ "$(DBG_CODEGEN)" == 1 ]]; then          \
	    echo "DBG: calculating Go dependencies";  \
	fi
	KUBE_BUILD_PLATFORMS="" \
	    hack/make-rules/build.sh hack/make-rules/helpers/go2make
	hack/run-in-gopath.sh go2make            \
	    k8s.io/kubernetes/...                \
	    --prune  k8s.io/kubernetes/staging   \
	    --prune  k8s.io/kubernetes/vendor    \
	    k8s.io/kubernetes/vendor/k8s.io/...  \
	    > $@.tmp
	if [[ -s $@.tmp ]]; then                             \
	    if ! cmp -s $@.tmp $@; then                      \
	        if [[ "$(DBG_CODEGEN)" == 1 ]]; then         \
	            echo "DBG: $(GO_PKGDEPS_FILE) changed";  \
	        fi;                                          \
	        cat $@.tmp > $@;                             \
	    fi                                               \
	else                                                 \
	    kube::log::error "go2make produced no results";  \
	    rm -f $@;                                        \
	    false;                                           \
	fi
	rm -f $@.tmp
endif # MAKE_RESTARTS

.PHONY: FORCE
FORCE:

#
# Helper logic to find which directories need codegen as quickly as possible.
#

# This variable holds a list of every directory that contains Go files in this
# project.  Other rules and variables can use this as a starting point to
# reduce filesystem accesses.
ifeq ($(DBG_MAKEFILE),1)
    $(warning ***** finding all *.go dirs)
endif
ALL_GO_DIRS := $(shell                                                   \
    hack/make-rules/helpers/cache_go_dirs.sh $(META_DIR)/all_go_dirs.mk  \
)
ifeq ($(DBG_MAKEFILE),1)
    $(warning ***** found $(shell echo $(ALL_GO_DIRS) | wc -w) *.go dirs)
endif

# Generate a list of all files that have a `+k8s:` comment-tag.  This will be
# used to derive lists of files/dirs for generation tools.
ifeq ($(DBG_MAKEFILE),1)
    $(warning ***** finding all +k8s: tags)
endif
ALL_K8S_TAG_FILES := $(shell                             \
    find $(ALL_GO_DIRS) -maxdepth 1 -type f -name \*.go  \
        | xargs grep --color=never -l '^// *+k8s:'       \
)
ifeq ($(DBG_MAKEFILE),1)
    $(warning ***** found $(shell echo $(ALL_K8S_TAG_FILES) | wc -w) +k8s: tagged files)
endif

#
# Code generation logic.
#


# prerelease-lifecycle generation
#
# Any package that wants prerelease-lifecycle functions generated must include a
# comment-tag in column 0 of one file of the form:
#     // +k8s:prerelease-lifecycle-gen=true
#

# The result file, in each pkg, of prerelease-lifecycle generation.
PRERELEASE_LIFECYCLE_BASENAME := $(GENERATED_FILE_PREFIX)prerelease-lifecycle
PRERELEASE_LIFECYCLE_FILENAME := $(PRERELEASE_LIFECYCLE_BASENAME).go

# The tool used to generate prerelease-lifecycle code.
PRERELEASE_LIFECYCLE_GEN := $(BIN_DIR)/prerelease-lifecycle-gen

# Find all the directories that request prerelease-lifecycle generation.
ifeq ($(DBG_MAKEFILE),1)
    $(warning ***** finding all +k8s:prerelease-lifecycle-gen tags)
endif
PRERELEASE_LIFECYCLE_DIRS := $(shell                                                 \
    grep --color=never -l '+k8s:prerelease-lifecycle-gen=true' $(ALL_K8S_TAG_FILES)  \
        | xargs -n1 dirname                                                          \
        | LC_ALL=C sort -u                                                           \
)
ifeq ($(DBG_MAKEFILE),1)
    $(warning ***** found $(shell echo $(PRERELEASE_LIFECYCLE_DIRS) | wc -w) +k8s:prerelease-lifecycle-gen tagged dirs)
endif
PRERELEASE_LIFECYCLE_FILES := $(addsuffix /$(PRERELEASE_LIFECYCLE_FILENAME), $(PRERELEASE_LIFECYCLE_DIRS))

# Reset the list of packages that need generation.
$(shell mkdir -p $$(dirname $(META_DIR)/$(PRERELEASE_LIFECYCLE_GEN)))
$(shell rm -f $(META_DIR)/$(PRERELEASE_LIFECYCLE_GEN).todo)

# This rule aggregates the set of files to generate and then generates them all
# in a single run of the tool.
.PHONY: gen_prerelease_lifecycle
gen_prerelease_lifecycle: $(PRERELEASE_LIFECYCLE_GEN) $(META_DIR)/$(PRERELEASE_LIFECYCLE_GEN).todo
	if [[ -s $(META_DIR)/$(PRERELEASE_LIFECYCLE_GEN).todo ]]; then                 \
	    pkgs=$$(cat $(META_DIR)/$(PRERELEASE_LIFECYCLE_GEN).todo | paste -sd, -);  \
	    if [[ "$(DBG_CODEGEN)" == 1 ]]; then                                       \
	        echo "DBG: running $(PRERELEASE_LIFECYCLE_GEN) for $$pkgs";            \
	    fi;                                                                        \
	    N=$$(cat $(META_DIR)/$(PRERELEASE_LIFECYCLE_GEN).todo | wc -l);            \
	    kube::log::status "Generating prerelease lifecycle code for $$N targets";  \
	    ./hack/run-in-gopath.sh $(PRERELEASE_LIFECYCLE_GEN)                        \
	        --v $(KUBE_VERBOSE)                                                    \
	        --logtostderr                                                          \
	        -i "$$pkgs"                                                            \
	        -O $(PRERELEASE_LIFECYCLE_BASENAME)                                    \
	        "$$@";                                                                 \
	fi

# For each dir in PRERELEASE_LIFECYCLE_DIRS, this establishes a dependency between the
# output file and the input files that should trigger a rebuild.
#
# Note that this is a deps-only statement, not a full rule (see below).  This
# has to be done in a distinct step because wildcards don't work in static
# pattern rules.
#
# The 'eval' is needed because this has a different RHS for each LHS, and
# would otherwise produce results that make can't parse.
$(foreach dir, $(PRERELEASE_LIFECYCLE_DIRS), $(eval                            \
    $(dir)/$(PRERELEASE_LIFECYCLE_FILENAME): $(GODEPS_$(PRJ_SRC_PATH)/$(dir))  \
))

# How to regenerate prerelease-lifecycle code.  This is a little slow to run,
# so we batch it up and trigger the batch from the 'generated_files' target.
$(META_DIR)/$(PRERELEASE_LIFECYCLE_GEN).todo: $(PRERELEASE_LIFECYCLE_FILES)

$(PRERELEASE_LIFECYCLE_FILES): $(PRERELEASE_LIFECYCLE_GEN)
	if [[ "$(DBG_CODEGEN)" == 1 ]]; then                 \
	    echo "DBG: prerelease-lifecycle needed $(@D):";  \
	    ls -lf --full-time $@ $? || true;                \
	fi
	echo $(PRJ_SRC_PATH)/$(@D) >> $(META_DIR)/$(PRERELEASE_LIFECYCLE_GEN).todo

# How to build the generator tool.  The deps for this are defined in
# the $(GO_PKGDEPS_FILE), above.
#
# A word on the need to touch: This rule might trigger if, for example, a
# non-Go file was added or deleted from a directory on which this depends.
# This target needs to be reconsidered, but Go realizes it doesn't actually
# have to be rebuilt.  In that case, make will forever see the dependency as
# newer than the binary, and try to "rebuild" it over and over.  So we touch
# it, and make is happy.
$(PRERELEASE_LIFECYCLE_GEN): $(GODEPS_k8s.io/kubernetes/vendor/k8s.io/code-generator/cmd/prerelease-lifecycle-gen)
	KUBE_BUILD_PLATFORMS="" \
	    hack/make-rules/build.sh vendor/k8s.io/code-generator/cmd/prerelease-lifecycle-gen
	touch $@


# Deep-copy generation
#
# Any package that wants deep-copy functions generated must include a
# comment-tag in column 0 of one file of the form:
#     // +k8s:deepcopy-gen=<VALUE>
#
# The <VALUE> may be one of:
#     generate: generate deep-copy functions into the package
#     register: generate deep-copy functions and register them with a
#               scheme

# The result file, in each pkg, of deep-copy generation.
DEEPCOPY_BASENAME := $(GENERATED_FILE_PREFIX)deepcopy
DEEPCOPY_FILENAME := $(DEEPCOPY_BASENAME).go

# The tool used to generate deep copies.
DEEPCOPY_GEN := $(BIN_DIR)/deepcopy-gen

# Find all the directories that request deep-copy generation.
ifeq ($(DBG_MAKEFILE),1)
    $(warning ***** finding all +k8s:deepcopy-gen tags)
endif
DEEPCOPY_DIRS := $(shell                                             \
    grep --color=never -l '+k8s:deepcopy-gen=' $(ALL_K8S_TAG_FILES)  \
        | xargs -n1 dirname                                          \
        | LC_ALL=C sort -u                                           \
)
ifeq ($(DBG_MAKEFILE),1)
    $(warning ***** found $(shell echo $(DEEPCOPY_DIRS) | wc -w) +k8s:deepcopy-gen tagged dirs)
endif
DEEPCOPY_FILES := $(addsuffix /$(DEEPCOPY_FILENAME), $(DEEPCOPY_DIRS))

# Reset the list of packages that need generation.
$(shell mkdir -p $$(dirname $(META_DIR)/$(DEEPCOPY_GEN)))
$(shell rm -f $(META_DIR)/$(DEEPCOPY_GEN).todo)

# This rule aggregates the set of files to generate and then generates them all
# in a single run of the tool.
.PHONY: gen_deepcopy
gen_deepcopy: $(DEEPCOPY_GEN) $(META_DIR)/$(DEEPCOPY_GEN).todo
	if [[ -s $(META_DIR)/$(DEEPCOPY_GEN).todo ]]; then                 \
	    pkgs=$$(cat $(META_DIR)/$(DEEPCOPY_GEN).todo | paste -sd, -);  \
	    if [[ "$(DBG_CODEGEN)" == 1 ]]; then                           \
	        echo "DBG: running $(DEEPCOPY_GEN) for $$pkgs";            \
	    fi;                                                            \
	    N=$$(cat $(META_DIR)/$(DEEPCOPY_GEN).todo | wc -l);            \
	    kube::log::status "Generating deepcopy code for $$N targets";  \
	    ./hack/run-in-gopath.sh $(DEEPCOPY_GEN)                        \
	        --v $(KUBE_VERBOSE)                                        \
	        --logtostderr                                              \
	        -i "$$pkgs"                                                \
	        --bounding-dirs $(PRJ_SRC_PATH),"k8s.io/api"               \
	        -O $(DEEPCOPY_BASENAME)                                    \
	        "$$@";                                                     \
	fi

# For each dir in DEEPCOPY_DIRS, this establishes a dependency between the
# output file and the input files that should trigger a rebuild.
#
# Note that this is a deps-only statement, not a full rule (see below).  This
# has to be done in a distinct step because wildcards don't work in static
# pattern rules.
#
# The 'eval' is needed because this has a different RHS for each LHS, and
# would otherwise produce results that make can't parse.
$(foreach dir, $(DEEPCOPY_DIRS), $(eval                            \
    $(dir)/$(DEEPCOPY_FILENAME): $(GODEPS_$(PRJ_SRC_PATH)/$(dir))  \
))

# How to regenerate deep-copy code.  This is a little slow to run, so we batch
# it up and trigger the batch from the 'generated_files' target.
$(META_DIR)/$(DEEPCOPY_GEN).todo: $(DEEPCOPY_FILES)

$(DEEPCOPY_FILES): $(DEEPCOPY_GEN)
	if [[ "$(DBG_CODEGEN)" == 1 ]]; then     \
	    echo "DBG: deepcopy needed $(@D):";  \
	    ls -lf --full-time $@ $? || true;    \
	fi
	echo $(PRJ_SRC_PATH)/$(@D) >> $(META_DIR)/$(DEEPCOPY_GEN).todo

# How to build the generator tool.  The deps for this are defined in
# the $(GO_PKGDEPS_FILE), above.
#
# A word on the need to touch: This rule might trigger if, for example, a
# non-Go file was added or deleted from a directory on which this depends.
# This target needs to be reconsidered, but Go realizes it doesn't actually
# have to be rebuilt.  In that case, make will forever see the dependency as
# newer than the binary, and try to "rebuild" it over and over.  So we touch
# it, and make is happy.
$(DEEPCOPY_GEN): $(GODEPS_k8s.io/kubernetes/vendor/k8s.io/code-generator/cmd/deepcopy-gen)
	KUBE_BUILD_PLATFORMS="" \
	    hack/make-rules/build.sh vendor/k8s.io/code-generator/cmd/deepcopy-gen
	touch $@


# Defaulter generation
#
# Any package that wants defaulter functions generated must include a
# comment-tag in column 0 of one file of the form:
#     // +k8s:defaulter-gen=<VALUE>
#
# The <VALUE> depends on context:
#     on types:
#       true:  always generate a defaulter for this type
#       false: never generate a defaulter for this type
#     on functions:
#       covers: if the function name matches SetDefault_NAME, instructs
#               the generator not to recurse
#     on packages:
#       FIELDNAME: any object with a field of this name is a candidate
#                  for having a defaulter generated

# The result file, in each pkg, of defaulter generation.
DEFAULTER_BASENAME := $(GENERATED_FILE_PREFIX)defaults
DEFAULTER_FILENAME := $(DEFAULTER_BASENAME).go

# The tool used to generate defaulters.
DEFAULTER_GEN := $(BIN_DIR)/defaulter-gen

# All directories that request any form of defaulter generation.
ifeq ($(DBG_MAKEFILE),1)
    $(warning ***** finding all +k8s:defaulter-gen tags)
endif
DEFAULTER_DIRS := $(shell                                            \
    grep --color=never -l '+k8s:defaulter-gen=' $(ALL_K8S_TAG_FILES) \
        | xargs -n1 dirname                                          \
        | LC_ALL=C sort -u                                           \
)
ifeq ($(DBG_MAKEFILE),1)
    $(warning ***** found $(shell echo $(DEFAULTER_DIRS) | wc -w) +k8s:defaulter-gen tagged dirs)
endif
DEFAULTER_FILES := $(addsuffix /$(DEFAULTER_FILENAME), $(DEFAULTER_DIRS))
DEFAULTER_EXTRA_PEER_PKGS := \
    $(addprefix $(PRJ_SRC_PATH)/, $(DEFAULTER_DIRS))

# Reset the list of packages that need generation.
$(shell mkdir -p $$(dirname $(META_DIR)/$(DEFAULTER_GEN)))
$(shell rm -f $(META_DIR)/$(DEFAULTER_GEN).todo)

# This rule aggregates the set of files to generate and then generates them all
# in a single run of the tool.
.PHONY: gen_defaulter
gen_defaulter: $(DEFAULTER_GEN) $(META_DIR)/$(DEFAULTER_GEN).todo
	if [[ -s $(META_DIR)/$(DEFAULTER_GEN).todo ]]; then                 \
	    pkgs=$$(cat $(META_DIR)/$(DEFAULTER_GEN).todo | paste -sd, -);  \
	    if [[ "$(DBG_CODEGEN)" == 1 ]]; then                            \
	        echo "DBG: running $(DEFAULTER_GEN) for $$pkgs";            \
	    fi;                                                             \
	    N=$$(cat $(META_DIR)/$(DEFAULTER_GEN).todo | wc -l);            \
	    kube::log::status "Generating defaulter code for $$N targets";  \
	    ./hack/run-in-gopath.sh $(DEFAULTER_GEN)                        \
	        --v $(KUBE_VERBOSE)                                         \
	        --logtostderr                                               \
	        -i "$$pkgs"                                                 \
	        --extra-peer-dirs $$(echo $(DEFAULTER_EXTRA_PEER_PKGS) | sed 's/ /,/g') \
	        -O $(DEFAULTER_BASENAME)                                    \
	        "$$@";                                                      \
	fi

# For each dir in DEFAULTER_DIRS, this establishes a dependency between the
# output file and the input files that should trigger a rebuild.
#
# Note that this is a deps-only statement, not a full rule (see below for that).
#
# The 'eval' is needed because this has a different RHS for each LHS, and
# would otherwise produce results that make can't parse.
$(foreach dir, $(DEFAULTER_DIRS), $(eval                            \
    $(dir)/$(DEFAULTER_FILENAME): $(GODEPS_$(PRJ_SRC_PATH)/$(dir))  \
))

# How to regenerate defaulter code.  This is a little slow to run, so we batch
# it up and trigger the batch from the 'generated_files' target.
$(META_DIR)/$(DEFAULTER_GEN).todo: $(DEFAULTER_FILES)

$(DEFAULTER_FILES): $(DEFAULTER_GEN)
	if [[ "$(DBG_CODEGEN)" == 1 ]]; then      \
	    echo "DBG: defaulter needed $(@D):";  \
	    ls -lf --full-time $@ $? || true;     \
	fi
	echo $(PRJ_SRC_PATH)/$(@D) >> $(META_DIR)/$(DEFAULTER_GEN).todo

# How to build the generator tool.  The deps for this are defined in
# the $(GO_PKGDEPS_FILE), above.
#
# A word on the need to touch: This rule might trigger if, for example, a
# non-Go file was added or deleted from a directory on which this depends.
# This target needs to be reconsidered, but Go realizes it doesn't actually
# have to be rebuilt.  In that case, make will forever see the dependency as
# newer than the binary, and try to "rebuild" it over and over.  So we touch
# it, and make is happy.
$(DEFAULTER_GEN): $(GODEPS_k8s.io/kubernetes/vendor/k8s.io/code-generator/cmd/defaulter-gen)
	KUBE_BUILD_PLATFORMS="" \
	    hack/make-rules/build.sh vendor/k8s.io/code-generator/cmd/defaulter-gen
	touch $@


# Conversion generation

# Any package that wants conversion functions generated into it must
# include one or more comment-tags in its `doc.go` file, of the form:
#     // +k8s:conversion-gen=<INTERNAL_TYPES_DIR>
#
# The INTERNAL_TYPES_DIR is a project-local path to another directory
# which should be considered when evaluating peer types for
# conversions.  An optional additional comment of the form
#     // +k8s:conversion-gen-external-types=<EXTERNAL_TYPES_DIR>
#
# identifies where to find the external types; if there is no such
# comment then the external types are sought in the package where the
# `k8s:conversion` tag is found.
#
# Conversions, in both directions, are generated for every type name
# that is defined in both an internal types package and the external
# types package.
#
# TODO: it might be better in the long term to make peer-types explicit in the
# IDL.

# The result file, in each pkg, of conversion generation.
CONVERSION_BASENAME := $(GENERATED_FILE_PREFIX)conversion
CONVERSION_FILENAME := $(CONVERSION_BASENAME).go

# The tool used to generate conversions.
CONVERSION_GEN := $(BIN_DIR)/conversion-gen

# The name of the metadata file listing conversion peers for each pkg.
CONVERSIONS_META := conversions.mk

# All directories that request any form of conversion generation.
ifeq ($(DBG_MAKEFILE),1)
    $(warning ***** finding all +k8s:conversion-gen tags)
endif
CONVERSION_DIRS := $(shell                                              \
    grep --color=never '^// *+k8s:conversion-gen=' $(ALL_K8S_TAG_FILES) \
        | cut -f1 -d:                                                   \
        | xargs -n1 dirname                                             \
        | LC_ALL=C sort -u                                              \
)
ifeq ($(DBG_MAKEFILE),1)
    $(warning ***** found $(shell echo $(CONVERSION_DIRS) | wc -w) +k8s:conversion-gen tagged dirs)
endif
CONVERSION_FILES := $(addsuffix /$(CONVERSION_FILENAME), $(CONVERSION_DIRS))
CONVERSION_EXTRA_PEER_PKGS := \
    k8s.io/kubernetes/pkg/apis/core \
    k8s.io/kubernetes/pkg/apis/core/v1 \
    k8s.io/api/core/v1
CONVERSION_EXTRA_PKGS := $(addprefix $(PRJ_SRC_PATH)/, $(CONVERSION_DIRS))

# Reset the list of packages that need generation.
$(shell mkdir -p $$(dirname $(META_DIR)/$(CONVERSION_GEN)))
$(shell rm -f $(META_DIR)/$(CONVERSION_GEN).todo)

# This rule aggregates the set of files to generate and then generates them all
# in a single run of the tool.
.PHONY: gen_conversion
gen_conversion: $(CONVERSION_GEN) $(META_DIR)/$(CONVERSION_GEN).todo
	if [[ -s $(META_DIR)/$(CONVERSION_GEN).todo ]]; then                 \
	    pkgs=$$(cat $(META_DIR)/$(CONVERSION_GEN).todo | paste -sd, -);  \
	    if [[ "$(DBG_CODEGEN)" == 1 ]]; then                             \
	        echo "DBG: running $(CONVERSION_GEN) for $$pkgs";            \
	    fi;                                                              \
	    N=$$(cat $(META_DIR)/$(CONVERSION_GEN).todo | wc -l);            \
	    kube::log::status "Generating conversion code for $$N targets";  \
	    ./hack/run-in-gopath.sh $(CONVERSION_GEN)                        \
	        --extra-peer-dirs $$(echo $(CONVERSION_EXTRA_PEER_PKGS) | sed 's/ /,/g') \
	        --extra-dirs $$(echo $(CONVERSION_EXTRA_PKGS) | sed 's/ /,/g') \
	        --v $(KUBE_VERBOSE)                                          \
	        --logtostderr                                                \
	        -i "$$pkgs"                                                  \
	        -O $(CONVERSION_BASENAME)                                    \
	        "$$@";                                                       \
	fi

# For each dir in CONVERSION_DIRS, this establishes a dependency between the
# output file and the input files that should trigger a rebuild.
#
# Note that this is a deps-only statement, not a full rule (see below for that).
#
# The 'eval' is needed because this has a different RHS for each LHS, and
# would otherwise produce results that make can't parse.
$(foreach dir, $(CONVERSION_DIRS), $(eval                            \
    $(dir)/$(CONVERSION_FILENAME): $(GODEPS_$(PRJ_SRC_PATH)/$(dir))  \
))

# How to regenerate conversion code.  This is a little slow to run, so we batch
# it up and trigger the batch from the 'generated_files' target.
$(META_DIR)/$(CONVERSION_GEN).todo: $(CONVERSION_FILES)

$(CONVERSION_FILES): $(CONVERSION_GEN)
	if [[ "$(DBG_CODEGEN)" == 1 ]]; then       \
	    echo "DBG: conversion needed $(@D):";  \
	    ls -lf --full-time $@ $? || true;      \
	fi
	echo $(PRJ_SRC_PATH)/$(@D) >> $(META_DIR)/$(CONVERSION_GEN).todo

# How to build the generator tool.  The deps for this are defined in
# the $(GO_PKGDEPS_FILE), above.
#
# A word on the need to touch: This rule might trigger if, for example, a
# non-Go file was added or deleted from a directory on which this depends.
# This target needs to be reconsidered, but Go realizes it doesn't actually
# have to be rebuilt.  In that case, make will forever see the dependency as
# newer than the binary, and try to rebuild it over and over.  So we touch it,
# and make is happy.
$(CONVERSION_GEN): $(GODEPS_k8s.io/kubernetes/vendor/k8s.io/code-generator/cmd/conversion-gen)
	KUBE_BUILD_PLATFORMS="" \
	    hack/make-rules/build.sh vendor/k8s.io/code-generator/cmd/conversion-gen
	touch $@


# OpenAPI generation
#
# Any package that wants open-api functions generated must include a
# comment-tag in column 0 of one file of the form:
#     // +k8s:openapi-gen=true
#
# The result file, in each pkg, of open-api generation.
OPENAPI_BASENAME := $(GENERATED_FILE_PREFIX)openapi
OPENAPI_FILENAME := $(OPENAPI_BASENAME).go
BOILERPLATE_FILENAME := vendor/k8s.io/code-generator/hack/boilerplate.go.txt
IGNORED_REPORT_FILENAME := $(OUT_DIR)/ignored_violations.report

API_RULE_CHECK_FAILURE_MESSAGE = "ERROR: \n\t $(1) API rule check failed. Reported violations differ from known violations. Please read api/api-rules/README.md to resolve the failure in $(2). \n"

# The tool used to generate open apis.
OPENAPI_GEN := $(BIN_DIR)/openapi-gen

KUBE_KNOWN_VIOLATION_FILENAME := api/api-rules/violation_exceptions.list
AGGREGATOR_KNOWN_VIOLATION_FILENAME := api/api-rules/aggregator_violation_exceptions.list
APIEXTENSIONS_KNOWN_VIOLATION_FILENAME := api/api-rules/apiextensions_violation_exceptions.list
CODEGEN_KNOWN_VIOLATION_FILENAME := api/api-rules/codegen_violation_exceptions.list
SAMPLEAPISERVER_KNOWN_VIOLATION_FILENAME := api/api-rules/sample_apiserver_violation_exceptions.list

APIMACHINERY_DEFAULT_TAG_FILES := vendor/k8s.io/apimachinery/pkg/apis/meta/v1/% vendor/k8s.io/apimachinery/pkg/runtime/% vendor/k8s.io/apimachinery/pkg/version/%

KUBE_OPENAPI_TAG_FILES :=            $(filter-out vendor/k8s.io/code-generator/% vendor/k8s.io/sample-apiserver/%, $(ALL_K8S_TAG_FILES))
AGGREGATOR_OPENAPI_TAG_FILES :=      $(filter $(APIMACHINERY_DEFAULT_TAG_FILES) vendor/k8s.io/kube-aggregator/%, $(ALL_K8S_TAG_FILES))
APIEXTENSIONS_OPENAPI_TAG_FILES :=   $(filter $(APIMACHINERY_DEFAULT_TAG_FILES) vendor/k8s.io/apiextensions/% vendor/k8s.io/api/autoscaling/v1/%, $(ALL_K8S_TAG_FILES))
CODEGEN_OPENAPI_TAG_FILES :=         $(filter $(APIMACHINERY_DEFAULT_TAG_FILES) vendor/k8s.io/code-generator/%, $(ALL_K8S_TAG_FILES))
SAMPLEAPISERVER_OPENAPI_TAG_FILES := $(filter $(APIMACHINERY_DEFAULT_TAG_FILES) vendor/k8s.io/sample-apiserver/%, $(ALL_K8S_TAG_FILES))

KUBE_OPENAPI_OUTPUT_PKG := pkg/generated/openapi
AGGREGATOR_OPENAPI_OUTPUT_PKG := staging/src/k8s.io/kube-aggregator/pkg/generated/openapi
APIEXTENSIONS_OPENAPI_OUTPUT_PKG := staging/src/k8s.io/apiextensions-apiserver/pkg/generated/openapi
CODEGEN_OPENAPI_OUTPUT_PKG := staging/src/k8s.io/code-generator/examples/apiserver/openapi
SAMPLEAPISERVER_OPENAPI_OUTPUT_PKG := staging/src/k8s.io/sample-apiserver/pkg/generated/openapi

OPENAPI_TARGETS := KUBE AGGREGATOR APIEXTENSIONS CODEGEN SAMPLEAPISERVER

# Find all the directories that request openapi generation.
# - required input: $(prefix)
define OPENAPI_DIR_DEF
ifeq ($$(DBG_MAKEFILE),1)
    $$(warning ***** finding all +k8s:openapi-gen tags for $(prefix))
endif
$(prefix)_OPENAPI_DIRS := $$(shell                                            \
    grep --color=never -l '+k8s:openapi-gen=' $$($(prefix)_OPENAPI_TAG_FILES) \
        | xargs -n1 dirname                                                   \
        | LC_ALL=C sort -u                                                    \
)
ifeq ($$(DBG_MAKEFILE),1)
    $$(warning ***** found $$(shell echo $$($(prefix)_OPENAPI_TAG_FILES) | wc -w) +k8s:openapi-gen tagged dirs for $(prefix))
endif
endef # OPENAPI_DIR_DEF
$(foreach prefix, $(OPENAPI_TARGETS), $(eval $(OPENAPI_DIR_DEF)))

# Compute all openapi output file names
$(foreach prefix, $(OPENAPI_TARGETS), $(eval                                         \
    $(prefix)_OPENAPI_OUTFILE := $($(prefix)_OPENAPI_OUTPUT_PKG)/$(OPENAPI_FILENAME) \
))

# For each openapi target compute the spec
# - required input: $(prefix)
define OPENAPI_TARGETS_DEF
# For each dir in $(prefix)_OPENAPI_DIRS, this establishes a dependency
# between the output file and the input files that should trigger a rebuild.
#
# Note that this is a deps-only statement, not a full rule
# (see below for that).
#
# The 'eval' is needed because this has a different RHS for each LHS, and
# would otherwise produce results that make can't parse.
$$(foreach dir, $$($(prefix)_OPENAPI_DIRS), $$(eval                     \
    $$($(prefix)_OPENAPI_OUTFILE): $$(GODEPS_$$(PRJ_SRC_PATH)/$$(dir))  \
))

# When UPDATE_API_KNOWN_VIOLATIONS is set to be true, let the generator to write
# updated API violations to the known API violation exceptions list.
ifeq ($$(UPDATE_API_KNOWN_VIOLATIONS),true)
    $(prefix)_REPORT_FILENAME := $$($(prefix)_KNOWN_VIOLATION_FILENAME)
    # When UPDATE_API_KNOWN_VIOLATIONS is set to be true, touch the exceptions
    # list so that the $(prefix)_OPENAPI_OUTFILE target re-run instead of being cached.
    $$(shell touch $$($(prefix)_KNOWN_VIOLATION_FILENAME))
else
    $(prefix)_REPORT_FILENAME := $$(OUT_DIR)/$(prefix)_violations.report
endif

# How to regenerate open-api code.  This emits a single file for all results.
# The Make rule fails if generated API rule violation report differs from the
# checked-in violation file, and prints error message to request developer to
# fix either the API source code, or the known API rule violation file.
$$($(prefix)_OPENAPI_OUTFILE): $$(OPENAPI_GEN) $$($(prefix)_KNOWN_VIOLATION_FILENAME)
	kube::log::status "Generating openapi code for $(prefix)";                                   \
	./hack/run-in-gopath.sh $$(OPENAPI_GEN)                                                      \
	    --v $$(KUBE_VERBOSE)                                                                     \
	    --logtostderr                                                                            \
	    -i $$$$(echo $$(addprefix $(PRJ_SRC_PATH)/, $$($(prefix)_OPENAPI_DIRS)) | sed 's/ /,/g') \
	    -p $$(PRJ_SRC_PATH)/$$($(prefix)_OPENAPI_OUTPUT_PKG)                                     \
	    -O $$(OPENAPI_BASENAME)                                                                  \
	    -h $$(BOILERPLATE_FILENAME)                                                              \
	    -r $$($(prefix)_REPORT_FILENAME)                                                         \
	    "$$$$@"
	test -f $$($(prefix)_KNOWN_VIOLATION_FILENAME) || touch $$($(prefix)_KNOWN_VIOLATION_FILENAME)
	diff $$($(prefix)_REPORT_FILENAME) $$($(prefix)_KNOWN_VIOLATION_FILENAME) || \
	(echo -e $$(call API_RULE_CHECK_FAILURE_MESSAGE,$(prefix),$$($(prefix)_KNOWN_VIOLATION_FILENAME)); exit 1)
endef # OPENAPI_TARGETS_DEF
$(foreach prefix, $(OPENAPI_TARGETS), $(eval $(OPENAPI_TARGETS_DEF)))

# This rule is the user-friendly entrypoint for openapi generation.
.PHONY: gen_openapi
gen_openapi: $(OPENAPI_GEN) $(KUBE_OPENAPI_OUTFILE) $(AGGREGATOR_OPENAPI_OUTFILE) $(APIEXTENSIONS_OPENAPI_OUTFILE) $(CODEGEN_OPENAPI_OUTFILE) $(SAMPLEAPISERVER_OPENAPI_OUTFILE)

# How to build the generator tool.  The deps for this are defined in
# the $(GO_PKGDEPS_FILE), above.
#
# A word on the need to touch: This rule might trigger if, for example, a
# non-Go file was added or deleted from a directory on which this depends.
# This target needs to be reconsidered, but Go realizes it doesn't actually
# have to be rebuilt.  In that case, make will forever see the dependency as
# newer than the binary, and try to "rebuild" it over and over.  So we touch
# it, and make is happy.
$(OPENAPI_GEN): $(GODEPS_k8s.io/kubernetes/vendor/k8s.io/kube-openapi/cmd/openapi-gen)
	KUBE_BUILD_PLATFORMS="" \
	    hack/make-rules/build.sh vendor/k8s.io/kube-openapi/cmd/openapi-gen
	touch $@