Skip to content

Latest commit

 

History

History
42 lines (21 loc) · 1.71 KB

Camera-container.md

File metadata and controls

42 lines (21 loc) · 1.71 KB
Raw

#Camera-container

{{BOM}}

This part consists of a double cube adaptation designed to hold a specific type of lens. These parts are screwed together to maintain the position of the lens and allow for manual focus adjustments.

##Assembly:

Connect the camera:{pagestep}

Thake your [camera][[High speed camera]] and the lens{qty:1} and screw them together.

Positionate the pieces:{pagestep}

  1. Place the mounted camera{qty:1} on top of the Double Cube Lens Holder A{qty: 1, cat: PrintedPart}, matching the diameters of the [lens][Lens] with the ones in the printed part.

  2. Do the same thing with the Double Cube Lens Holder B{qty: 1, cat: PrintedPart}, placing it on top of the other two.

Screw: {pagestep}

Take the M3x15mm{qty:2} and the M3x25mm{qty:4} screws, place them into the plastic and tighten using a 2.5mm Ball-end Allen key{qty:1}, leaving the shorter screws in the holes furthest from the lens, as shown in the image.

i Ensure that the camera is positioned correctly.